PCE Instruments ABT 220L Analytical Balance with Wind Shield 220 g

Model # ABT 220L

Resolution of 0.1 mg
Weighing surface of 80 mm
Weighing range up to 220 g
Level for aligning the analytical balance

BrandPCE Instruments
Model NumberABT 220L

ADD TO MY RFQ LIST Add to your requistion list to get a quote.

With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the fine scale.
Weighing the smallest samples is very difficult because even a small gust of wind falsifies the measured value. For this reason, a wind shield is installed around the weighing surface of the analytical balance. This ensures that even the smallest gusts of wind have no effect on the measurement of the precision scale.
The analytical balance can be connected directly to a PC via the RS232 interface. With the optionally available software for the analytical balance, the measurement data can be presented in a table.
A graphic representation of the measured values from the analytical balance is also possible with the software. There is also the option of exporting the measured values recorded by the analytical balance. In this way, the measured values of the analytical balance can be conveniently incorporated into presentations, sent by email or simply printed out.
If necessary, the analytical balance can be checked with the calibration weight supplied. This ensures that the analytical balance delivers a perfect measurement result. The analytical balance can also be adjusted by the operator in a very short time using the calibration weight.
With the built-in bubble level, the current positioning of the analytical balance can be determined at an installation location. If the positioning of the analytical balance is not suitable, this can be readjusted using the height-adjustable feet. This ensures that the analytical balance is properly aligned with the current installation location.
Wind protection for stable weighing
RS232 interface for PC connection
Backlight
Resolution of 0.1 mg
Weighing surface of 80 mm
Weighing range up to 220 g
Level for aligning the analytical balance
Calibration weight included in delivery

Measuring range	0 … 220 g
Resolution	0.1 mg
Repeatability	0.2 mg
Linearity	0.5 mg
Response time	<4 seconds
Weighing surface	Ø 80 mm stainless steel weighing plate
Taring range	full measuring range
Interface	RS232
Power supply	220 V
Operating conditions	10 … 40 °C
Dimensions	340 x 215 x 350 mm
Weight	7.5 kg