• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    PCE Instruments 830-2 Clamp Meter with Three-Phase

    # 830-2

    • The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, inter-harmonics, and asymmetric.
    • Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The back-lit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Clamp Meter.
    • The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, inter-harmonics, and asymmetric.
    • Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The back-lit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Clamp Meter.
    • In data logger mode, it can save up to 17,470 readings (3 phases/4 conductors), in a simpler set up (1 phase/2 conductors) it can save up to 52,400 readings, split into 85 groups. All this makes the it the ideal instrument for taking measurements over long duration.
    • Measurement values obtained can be sent to a computer and be processed with the included analysis software. The device comes with everything needed to be measuring and analyzing from the moment it arrives.
    • Analysis of a network of 3 phases/4 conductors, 3 phases/3 conductors, 1 phase/2 conductors, 1 phase/3 conductors
    • Measures effective real value (V 123 and I 123)
    • Measures active power (W, KW, MW, GW)
    • Measures apparent and reactive power (KVA, KVAR)
    • Power Factor (PF), phase angle (Φ)
    • Measures energy and work (Wh, KWh, KVARh, PFh)
    • Measures current from 0.1 mA to 3000 A, allowing for the reserve power of a factory to be determined
    • Large LCD that shows up to 35 parameters simultaneously (3P4W [=3 phases/4 conductors])
    • CT conditions (1 to 600) and PT (1 to 3000) are programmable
    • Indicates current wave forms and voltage overlap.
    • 512 KB of memory with programmable intervals to save data every 2 to 3000 seconds, 17,470 readings using the system of 3 phases/conductors
    • Indicates wave forms, efficiency parameters, and harmonic distortion
    • Back-lit LCD with dot matrix
    • Average power (AD in W, KW, MW)
    • Maximum power (MD in W, KW, MW) with the programmable period
    • Analysis of harmonic distortion up to a curvature of 99
    • Indication of up to 50º form of harmonic wave
    • Indication of the wave form with maximum value (1024 readings / period)
    • Analysis of absolute distortion (%THD-F)
    • Diagram of graphic equilibrium with parameters of a 3 phase system
    • Detects up to 28 transistors (time and cycles) with a programmable threshold (%)
    • Relation of 3 phases of voltage or asymmetrical current (VUR)
    • Factor of 3 phases of voltage and asymmetrical current (d0%, d2%)
    • USB port (optically insulated)
    • Integrated timer and calendar to record data
    • Maximum diameter of the electrical conductor for the amp clamp: the PCE-6801 ~30 mm / 1.2 in, PCE-6802 ~55 mm / 2.2 in, PCE-3007 ~170 mm / 6.7 in
    Memory512 kB for a maximum 52,420 readings taken by 1 phase / 2 conductors
    PortUSB
    Software and cableIncluded, for Windows 2000, XP, ME
    DisplayBacklit LCD with dot matrix
    Power8 AA batteries (Mignon)
    Dimensions257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
    Weight1.16 kg / 2.56 lbs
    Operating conditionsMax. 85% relative humidity / -10 to 50ºC / 14 to 122°F
    Type of protection / standardsIEC 61010, 600 V/CAT III
    • 1 x PCE-830-2 Power Meter
    • 3 x Amp clamps – Depending on set ordered (PCE-6801, PCE-6802, or PCE-3007)
    • 4 x Alligator clips
    • 4 x Safety test lines (3 m / 3.3 ft long)
    • 8 x Batteries
    • 1 x Mains adaptor
    • 1 x Carrying case
    • 1 x USB cable software
    • 1 x User’s manual

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form