• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • FLUKE 754 HART Documenting Process Calibrator

    # 754

    • HART Communications capability. Measure: 300V AC/DC; 110mA DC. Source: 15V DC; 22mA DC.
    • Measure volts; mA; RTDs; thermocouples; frequency; and ohms to test sensors; transmitters and other instruments
    • Bright white dual display. Read both sourced and measured parameters simultaneously.
    • Source/simulate volts; mA; thermocouples; RTDs; frequency; ohms; and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement
      Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
    • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
    • Holds up to a full week of downloaded procedures and calibration results.
    • Use many features like autostep; custom units; user entered values during test; one-point and two-point switch testing; square root DP flow testing; programmable measurement delay etc.
    • Bright white dual display. Read both sourced and measured parameters simultaneously.
    • Multi lingual interface
    • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
    • Handling of fast pulsed RTD transmitters and PLCs; with pulses as short as 1 ms.
    • Delivered with DPC/Track Sample software.
    • Compatible with many Asset Management software packages.
    Measurement Accuracy
    Voltage DCRange/ Resolution1 Year2 Years
    100.000 mV0.02% + 0.005 mV0.03% + 0.005 mV
    3.00000 V0.02% + 0.00005 V0.03% + 0.00005 V
    30.0000 V0.02% + 0.0005 V0.03% + 0.0005 V
    300.00 V0.05% + 0.05 V0.07% + 0.05 V
    Voltage AC3.000 V (40 Hz to 500 Hz) / 0.001 V0.5% + 0.002 V1.0% + 0.004 V
    30.00 V (40 Hz to 500 Hz) / 0.01 V0.5% + 0.02 V1.0% + 0.04 V
    300.0 V (40 Hz to 500 Hz) / 0.1 V0.5% + 0.2 V1.0% + 0.2 V
    Current DC30.000 mA0.01% + 5 uA0.015% + 7 uA
    110.00 mA0.01% + 20 uA0.015% + 30 uA
    Resistance10.000 Ω0.05% + 50 mΩ0.07% + 70 mΩ
    100.00 Ω0.05% + 50 mΩ0.07% + 70 mΩ
    1.0000 kΩ0.05% + 500 mΩ0.07% + 0.5 Ω
    10.000 kΩ0.1% + 10 Ω0.15% + 15 Ω
    Frequency1.00 to 110.00 Hz / 0.01 Hz0.05 Hz
    110.1 to 1100.0 Hz / 0.1 Hz0.5 Hz
    1.101 to 11.000 kHz / 0.001 kHz0.005 kHz
    11.01 to 50.00 kHz / 0.01 kHz0.05 kHz
    Source Accuracy
    1 Year2 Years
    Voltage DC100.000 mV0.01% + 0.005 mV0.015% + 0.005 mV
    1.00000 V0.01% + 0.00005 V0.015% + 0.0005 V
    15.0000 V0.01% + 0.0005 V0.015% + 0.0005 V
    Current DC22.000 mA (source)0.01% + 0.003 mA0.02% + 0.003 mA
    Current sink (simulate)0.02% + 0.007 mA0.04% + 0.007 mA
    Resistance10.000 Ω0.01% + 10 mΩ0.015% + 15 mΩ
    100.00 Ω0.01% + 20 mΩ0.015% + 30 mΩ
    1.0000 kΩ0.02% + 0.2 Ω0.03% + 0.3 Ω
    10.000 kΩ0.02% + 3 Ω0.03% + 5 Ω
    Frequency0.1 to 10.99 Hz0.01 Hz
    0.01 to 10.99 Hz0.01 Hz
    11.00 to 109.99 Hz0.1 Hz
    110.0 to 1099.9 Hz0.1 Hz
    1.100 to 21.999 kHz0.002 kHz
    22.000 to 50.000 kHz0.005 kHz
    Technical Data
    Data log functionsMeasure functionsVoltage, current, resistance, frequency, temperature, pressure
    Reading rate1, 2, 5, 10, 20, 30, or 60 readings/minute
    Maximum record length8000 readings (7980 for 30 or 60 readings/minute)
    Ramp functionsSource functionsVoltage, current, resistance, frequency, temperature
    Rate4 steps/second
    Trip detectContinuity or voltage (continuity detection not available when sourcing current)
    Loop power functionVoltageSelectable, 26 V
    Accuracy10%, 18 V minimum at 22 mA
    Maximum current25 mA, short circuit protected
    Maximum input voltage50 V DC
    Step functionsSource functionsVoltage, current, resistance, frequency, temperature
    Manual stepSelectable step, change with arrow buttons
    AutostepFully programmable for function, start delay, stepvalue, time per step, repeat
    Environmental Specifications
    Operating temperature-10°C to +50°C
    Storage temperature-20°C to +60°C
    Dust/water resistanceMeets IP52, IEC 529
    Operating altitude3000 m above mean sea level (9842 ft)
    Safety Specifications
    Agency approvalsCAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993
    Mechanical and General Specifications
    Size136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)
    Weight1.2 kg (2.7 lb)
    BatteriesInternal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh
    Battery life>8 hours typical
    Battery replacementReplace without opening calibrator; no tools required
    Side port connectionsPressure module connector
    USB Connector to interface to your PC
    Digital instrument (HART) connector
    Connection for optional battery charger/eliminator
    Data storage capacity1 week of calibration procedures results
    90 day specificationsThe standard specification interval for the 750 Seriesare 1 and 2 years.
    Typical 90 day measurement and source accuracy can be estimated by dividing the one year “% of reading” or “% of output” specifications by 2.
    Floor specifications, expressed as “% of full scale” or “counts” or “ohms” remain constant.
    Temperature, Resistance Temperature Detectors
    Degrees or % of reading – Type (α)Range °CMeasure °C1
    1 year2 year
    100 Ω Pt (385)-200 to 100
    100 to 800
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    200 Ω Pt (385)-200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    500 Ω Pt (385)-200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    1000 Ω Pt (385)-200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    100 Ω Pt (3916)-200 to 100
    100 to 630
    0.07°C
    0.02% + 0.05°C
    0.14°C
    0.04% + 0.10°C
    100 Ω Pt (3926)-200 to 100
    100 to 630
    0.08°C
    0.02% + 0.06°C
    0.16°C
    0.04% + 0.12°C
    10 Ω Cu (427)-100 to 2600.2°C0.4°C
    120 Ω Ni (672)-80 to 2600.1°C0.2°C
    Source currentSource °CAllowable current2
    1 year2 year
    1 mA0.05°C
    0.0125% + 0.04°C
    0.10°C
    0.025% + 0.08°C
    0.1 mA to 10 mA
    500 μA0.06°C
    0.017% + 0.05°C
    0.12°C
    0.034% + 0.10°C
    0.1 mA to 1 mA
    250 μA0.06°C
    0.017% + 0.05°C
    0.12°C
    0.034% + 0.10°C
    0.1 mA to 1 mA
    150 μA0.06 C
    0.017% + 0.05°C
    0.12 C
    0.034% + 0.10°C
    0.1 mA to 1 mA
    1 mA0.05°C
    0.0125% + 0.04°C
    0.10°C
    0.025% + 0.08°C
    0.1 mA to 10 mA
    1 mA0.05°C
    0.0125% + 0.04°C
    0.10°C
    0.025% + 0.08°C
    0.1 mA to 10 mA
    3 mA0.2°C0.4°C0.1 mA to 10 mA
    1 mA0.04°C0.08°C0.1 mA to 10 mA
    1. For two and three-wire RTD measurements, add 0.4°C to the specifications.
    2. Supports pulsed transmitters and PLCs with pulse times as short as 1 ms
    Temperature, Thermocouples
    TypeSource °CMeasure °CSource °C
    1 year2 years1 year2 years
    E-250 to -2001.32.00.60.9
    -200 to -1000.50.80.30.4
    -100 to 6000.30.40.30.4
    600 to 10000.40.60.20.3
    N-200 to -1001.01.50.60.9
    -100 to 9000.50.80.50.8
    900 to 13000.60.90.30.4
    J-210 to -1000.60.90.30.4
    -100 to 8000.30.40.20.3
    800 to 12000.50.80.30.3
    K-200 to -1000.71.00.40.6
    -100 to 4000.30.40.30.4
    400 to 12000.50.80.30.4
    1200 to 13720.71.00.30.4
    T-250 to -2001.72.50.91.4
    -200 to 00.60.90.40.6
    0 to 4000.30.40.30.4
    B600 to 8001.32.01.01.5
    800 to 10001.01.50.81.2
    1000 to 18200.91.30.81.2
    R-20 to 02.32.81.21.8
    0 to 1001.52.21.11.7
    100 to 17671.01.50.91.4
    S-20 to 02.32.81.21.8
    0 to 2001.52.11.11.7
    200 to 14000.91.40.91.4
    1400 to 17671.11.71.01.5
    C0 to 8000.60.90.60.9
    800 to 12000.81.20.71.0
    1200 to 18001.11.60.91.4
    1800 to 23162.03.01.32.0
    L-200 to -1000.60.90.30.4
    -100 to 8000.30.40.20.3
    800 to 9000.50.80.20.3
    U-200 to 00.60.90.40.6
    0 to 6000.30.40.30.4
    BP0 to 10001.01.50.40.6
    1000 to 20001.62.40.60.9
    2000 to 25002.03.00.81.2
    XK-200 to 3000.20.30.20.5
    300 to 8000.40.60.30.6
    • BC7240 battery charger
    • Li-on BP7240 battery pack
    • DPCTrack 2ª Sample Software
    • Instruction manual
    • NIST-traceable calibration report and data
    • Three sets of TP220 test probes with three sets of Òextended tooth” alligator clips
    • Two sets AC280 hook clips
    • C799 Soft Field Case
    • USB communication cable, Fluke 754HHC HART communications cable

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form