• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Calibration Tools Accessories

    Shop our selection of Calibration Tools Accessories from our retail outlets across Dubai & UAE - AABTools



    Categories

    FLUKE 700-IV - Current Shunt
      FLUKE - Current Shunt Model # 700-IV

     
    • 4 – 20 mA current shunt
    • Very accurate to use for verification and calibration of current shunt process control circuits
    • Can be used with precision voltmeters for calibration purposes
    FLUKE 700HTH-1 - Hydraulic Test Hose
      FLUKE - Hydraulic Test Hose Model # 700HTH-1

     
    • 10;000 psi; 690 bar working pressure test hose that features stainless steel and nylon construction.
    • Hose and fittings connect directly to the Fluke 700HTP-1 test pressure port
    • Includes plugs and caps to eliminate fluid loss in hose; eliminates the need to re-prime the hose
    FLUKE 700HTP-2 - Hydraulic Test Pump; 690 bar
      FLUKE - Hydraulic Test Pump; 690 bar Model # 700HTP-2

     
    • Hand operated hydraulic pressure pump designed to generate calibration pressures up to 10;000 psi/690 bar.
    • Designed for use with Fluke-700 series high pressure modules
    • Variable size stroke adjustment; allows the user to vary the volume and pressure per stroke
    FLUKE 700ILF - In-Line Filter
      FLUKE - In-Line Filter Model # 700ILF

     
    • Can be used to isolate the calibrator from the incidental contract with fluids.
    • Particularly useful with the 718 calibrator to help keep moisture or oils from contaminating the on-board pump.
    • The Fluke 700ILF In-line Filter is specifically designed to trap fine particles from atmospheric air; compressed air; and instrument air.
    FLUKE 700LTP-1 - Low Pressure Test Pump
      FLUKE - Low Pressure Test Pump Model # 700LTP-1

     
    • Hand operated pressure pump designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar.
    • It has two pressure ports with quick fit connectors
    • Pump can be easily cleaned without disassembly
    FLUKE 700PMP - Pressure Pump (10 bar)
      FLUKE - Pressure Pump (10 bar) Model # 700PMP

     
    • The Fluke 700 PMP pressure pump is a hand-operated pump that provides pressures up to 150 psi/1000 kPa.
    • The Fluke 700 PMP has a 1/8″ FNPT output fitting and a linear stroke of 4 cm.
    • The pump incorporates a needle valve for venting and a volume adjust vernier for precision pressure adjustment.
    FLUKE 700PRV-1 - Pressure Relief Valve for 700HTP
      FLUKE - Pressure Relief Valve for 700HTP Model # 700PRV-1

     
    • Adjustable from 725 to 5800 PSI (50 to 200 bar)
    • Preset at 2;900 psi/200 bar
    • Repeatability to 10% of nominal setting
    FLUKE 700PTP-1 - Pneumatic Test Pump
      FLUKE - Pneumatic Test Pump Model # 700PTP-1

     
    • Pneumatic test pump is capable of supplying pressures up to 600 psi; 40 bar.
    • Pump can be easily cleaned without disassembly
    • The vernier can be used as a stand-alone low pressure calibration source
    FLUKE 700SC - Serial Interface Cable (Fluke 725/725Ex/726)
      FLUKE - Serial Interface Cable (Fluke 725/725Ex/726) Model # 700SC

     
    • Plugs into pressure module connector of process calibrators
    • Terminates in DB-9 connector, which plugs directly into PC serial port
    • Computer cable connects meters to printers
    FLUKE 700TC1 - Thermocouple Plug Kits (10 types)
      FLUKE - Thermocouple Plug Kits (10 types) Model # 700TC1

     
    • Thermoplastic plug bodies
    • Contacts of appropriate thermocouple metallurgy
    • Terminates user-supplied thermocouple wire to permit connection to main units
    FLUKE 700TC2 - Thermocouple Plug Kits (5 types)
      FLUKE - Thermocouple Plug Kits (5 types) Model # 700TC2

     
    • A kit of 7 mini-plug connectors:
    • Type E (purple);Type J (black);Type K (yellow);Type T (blue); & Type R/S (green)
    FLUKE 700TLK - Process Test Lead Kit; For 753/754 Multi-Function Process Calibrator
      FLUKE - Process Test Lead Kit; For 753/754 Multi-Function Process Calibrator Model # 700TLK

     
    • Process test lead kit
    • For 753/754 multi-function process calibrator
    FLUKE 709H-TRACK - Logging software with cable
      FLUKE - Logging software with cable Model # 709H-TRACK

     
    • Large backlit display
    • Digital selection knob with selectable decade control for easy data entry
    • Interactive menus
    FLUKE 71x - Hose kit
      FLUKE - Hose kit Model # 71x

     
    • The Fluke-71X is compatible with calibrators of 100psi and below in the Fluke 717, 718 and 719 series.
    • The hoses are transparent to allow the user to easily identify if there is oil.
    • Each kit contains 3 translucent hoses each 1m long, easy-to-connect push fit connectors (for connection to calibrator and DUT).
    FLUKE 71X-TRAP - Liquid Dirt, Generic
    FLUKE 720RTD - RTD Probe for 721, 721Ex and 719PRO
    FLUKE 750SW - DPC/TRACK2-software
    FLUKE BC7217 - Battery Charger
      FLUKE - Battery Charger Model # BC7217

     
    • Power supply: 3.9″ x 2.6″ x 1.6″ (100 mm x 66 mm x 41 mm; 72″ (1.8m) cord
    • Charger base: 4.6″ x 4.1″ x 2.7″ (116 mm x 104 mm x 58 mm)
    • Weight: 1.7 lb/0.78 kg
    FLUKE BC7240 - Battery Charger (753/754)
      FLUKE - Battery Charger (753/754) Model # BC7240

     
    • Battery Charger/Eliminator
    • Use for the Fluke 75x Documenting Process Calibrator
    FLUKE BP7235 - NiMH Battery Pack
      FLUKE - NiMH Battery Pack Model # BP7235

     
    • The Fluke rechargeable NiMH battery pack has a voltage rating of 7.2V and current rating of 3.5A.
    • The material used for this pack six 1.2VDC Ni-MH cells in custom-moulded ABS/PC-blend case.
    • It provides typical 16-hours battery life when used in 700 or 740 calibrator.
    FLUKE BP7240 - 753/754 Spare Battery
      FLUKE - 753/754 Spare Battery Model # BP7240

     
    • Li-Ion Battery Pack
    • For use with the Fluke 753, and 754 Process Calibrators
    FLUKE C700 - Hard Case (700 S)
      FLUKE - Hard Case (700 S) Model # C700

     
    • Cutouts to hold one documenting process calibrator; one Fluke Pressure Module; one BC7210 Battery Charger; one spare BP7217 Battery Pack; and test leads
    • Exterior Material : Blow-molded charcoal gray polyethylene with textured surface
    • Interior Material: Black; die-cut polyurethane foam
    FLUKE FVF-Basic - FlukeView Forms Basic+IR Cable (189;287;289;789;1550B)
      FLUKE - FlukeView Forms Basic+IR Cable (189;287;289;789;1550B) Model # FVF-Basic

     
    • With FlukeView Forms documenting software, the logging capabilities of handheld test equipment can be used to solve tough problems.
    • You can download the readings from meters into FlukeView
    • Forms to spot trends and document measurement data.
    FLUKE FVF-SC2 - FlukeView Forms Software+IR Cable(180S;1653;789;1550B)
      FLUKE - FlukeView Forms Software+IR Cable(180S;1653;789;1550B) Model # FVF-SC2

     
    • With FlukeView Forms documenting software, the logging capabilities of handheld test equipment can be used to solve tough problems.
    • You can download the readings from meters into FlukeView Forms to spot trends and document measurement data.
    • You can instantly review and compare data from up to 6 different meters on the same document – providing analysis capabilities that a meter alone can’t provide.
    FLUKE IR189USB - IR Cable – USB (280/180 S; 1653; 789; 1550B)
      FLUKE - IR Cable – USB (280/180 S; 1653; 789; 1550B) Model # IR189USB

     
    • The Fluke IR189USB USB Cable adapter is for use with Fluke 18X and 28X series digital multimeters.
    FLUKE 787CAL 230 - Calibration Module (Fluke 787)
      FLUKE - Calibration Module (Fluke 787) Model # 787CAL 230

     
    • The Fluke 787CAL module permits users and service facilities to perform automated MET/CAL verification and calibrations of the Fluke 787 Process Meter.
    • An installation of MET/CAL Calibration Software plus appropriate calibration hardware must be provided by the user.
    FLUKE BE9005 240 - Battery Eliminator
      FLUKE - Battery Eliminator Model # BE9005 240

     
    • 7.5V DC battery eliminator compatible with the Fluke 741B Documenting Process Calibrator.
    FLUKE HART DRYWELL CABLE - Cable Kit; Hart Drywellcontrol
      FLUKE - Cable Kit; Hart Drywellcontrol Model # HART DRYWELL CABLE

     
    • 6102, 7102, and 7103 Micro-Bath Thermometer Calibrators
    • 9009 Industrial Dual-Block Thermometer Calibrator
    • 9100 Ohm and 9102S Handheld Dry-Wells

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE