RIDGID 35170 Ratchet Bender 5/8in

Catalog # 35170

Designed to bend heavy-wall steel tube (up to 1/8″ wall thickness), stainless steel tube (up to 3/32″ wall thickness), and hard copper water tube (types K and L)
Produces uniform bends up to 180° with no need to anneal tubing or to use special temper grade tubing
High-geared design is easy to operate with minimal effort required

Designed to bend heavy-wall steel tube (up to 1/8″ wall thickness), stainless steel tube (up to 3/32″ wall thickness), and hard copper water tube (types K and L)
Produces uniform bends up to 180° with no need to anneal tubing or to use special temper grade tubing
High-geared design is easy to operate with minimal effort required
Marked with inch and metric sizes
Radius bend at center of tube: 3 in. (76 mm)
Tube outside diameter: 5/8 in. (16 mm)

Item	Tube Bender
Bend Angle	0 to 180 Deg.
Calibration Increments (Deg.)	15
Centerline Bend Radius	3″
Construction	Cast Aluminum
Handle Type	Long, Non-cushioned
Markings	Calibrated Angle Markings From 0 to 180 Degrees
Outside Dia. Tubing	5/8 In.
Overall Length	22 In.
Type	Geared Ratchet