Gazelle G9328 Receiver Clamp

Features

• The receiver clamp is designed for unique cable identification, providing convenience and high reliability
• It supports current measurement, allowing for precise identification of the target cable
• The receiver automatically identifies connected accessories and sets the mode to "Clamp Receiving Mode" when the flexible clamp is connected
• The clamp can measure the current intensity and phase of the target cable, which is used for accurate identification
• The clamp allows setting a reference current and phase at a known position, which is then used to compare and identify the target cable at other points
• The clamp works with specific frequencies (e.g., 640Hz and 1280Hz) for smart identification and current measurement
• For higher frequencies (e.g., 8kHz, 33kHz, 82kHz, 197kHz), the clamp supports current measurement but does not provide phase measurement or smart identification
• The clamp's distance from the transmitter must be sufficient (2-5m) to avoid interference during signal transmission and identification

Technical Information

• Phase Measurement: Available at 640 Hz and 1280 Hz
• Smart ID Mode: Enabled at 640 Hz and 1280 Hz
• High-Frequency Use: Current only at 8 kHz, 33 kHz, 82 kHz, 197 kHz
• Auto Recognition: Receiver switches to Clamp Mode automatically
• Reference Setting: Supports reference current and phase
• Interference Distance: Maintain 2–5 m from transmitting clamp

Downloads

User Manual-en