• Store Locator
  • Schedule a
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

  • Create a Requisition

    FLUKE 87-V-EUR True RMS Industrial Multimeter

    # 87-V-EUR

    • Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
    • Offers true-RMS AC voltage and current for measuring non-linear signals
    • Safety rated CAT III 1000 V, CAT IV 600 V

    Fluke 87V identifies complex signal problems fast

    The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS.


    Use the 87V to measure AC current up to 10 A directly, or use an optional clamp for high current measurements, frequency to 200 kHz, plus % duty cycle, resistance, continuity and diode test. And it includes a built-in thermometer so you can take temperature readings without having to carry a separate instrument, and more. Plus, with its bright, two-level backlit display you’ll be able to see the results better in dim light.


    Correctly measure pulse-width modulated motor drive signals

    The Fluke 87V takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high-frequency, high-energy noise generated by large drive systems.


    Electrical safety

    All the inputs in the 87V are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8000 V.


    Key features:

    • Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
    • Offers true-RMS AC voltage and current for measuring non-linear signals
    • Captures intermittents as short as 250 µS
    • Safety rated CAT III 1000 V, CAT IV 600 V
    • Includes a built-in thermometer and temperature probe


    Other useful features:

    • Easy access door for fast battery changes without breaking the calibration seal
    • Removable holster with built in test lead and probe storage for convenience
    • Audible Input Alert warning against wrong use of input jacks
    • Provides peak capture and Min/Max/Avg recording to capture intermittents as short as 250 µS
    • Designed and built in the U.S.
    • Comes with a lifetime warranty
    • Features—6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
    • Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
    • Includes an analog bargraph for fast changing or unstable signals
    • Presents a large digit display with bright, two-level backlight for easier reading in low light
    • Delivers 0.05% DC accuracy
    • Measures up to 1000 VAC and DC
    • Provides 10,000 µF capacitance range for components and motor caps
    • Offers relative mode to remove test lead interference from low ohms measurements
    • Features auto and manual ranging for maximum flexibility
    • Includes Touch Hold to capture stable readings of noisy signals
    Voltage DCMaximum voltage1000 V
    Accuracy±(0.05% + 1)
    Maximum resolution10 µV
    Voltage ACMaximum voltage1000 V
    Accuracy±(0.7% + 2) True RMS
    AC bandwidth20 kHz with low pass filter; 3 db @ 1 kHz
    Maximum resolution0.1 mV
    Current DCMaximum amps10 A (20 A for 30 seconds maximum)
    Amps accuracy±(0.2% + 2)
    Maximum resolution0.01 µA
    Current ACMaximum amps10 A (20 A for 30 seconds maximum)
    Amps accuracy±(1.0% + 2) True RMS
    Maximum resolution0.1 µA
    ResistanceMaximum resistance50 MΩ
    Accuracy±(0.2% + 1)
    Maximum resolution0.1 Ω
    CapacitanceMaximum capacitance9,999 µF
    accuracy±(1% + 2)
    Maximum resolution0.01 nF
    FrequencyMaximum frequency200 kHz
    Accuracy±(0.005% + 1)
    Maximum resolution0.01 Hz
    Duty cycleMaximum duty cycle99.9%
    Accuracy±(0.2% per khz + 0.1%)
    Maximum resolution0.1%
    Temperature measurement–200.0 °C – 1090 °C
    –328.0 °F – 1994.0 °F
    excluding probe
    80 BK temperature probe–40.0 °C – 260 °C
    –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater
    ConductanceMaximum conductance60.00 nS
    Accuracy±(1.0% + 10)
    Maximum resolution0.01 nS
    DiodeRange3 V
    Resolution1 mV
    Accuracy±(2% + 1)
    Duty cycle rangeAccuracyWithin ±(0.2% per kHz + 0.1%)
    Environmental Specifications
    Operating temperature–20 °C to + 55 °C
    Storage temperature–40 °C to + 60 °C
    Humidity (without condensation)0% – 90% (0 °C – 35 °C)
    0% – 70% (35 °C – 55 °C)
    Operating Altitude2000 m
    Safety Specifications
    Overvoltage categoryEN 61010–1 to 1000 V CAT III, 600V CAT IV
    Agency approvalsUL, CSA, TÜV, VDE listed
    Mechanical and General Specifications
    Size201 x 98 x 52 mm (with holster)
    Weight355 g
    624 g – with holster
    DisplayDigital6000 counts updates 4/sec.
    19,999 counts in high–resolution mode
    Analog32 segments, updates 40/sec
    Frequency19,999 counts, updates 3/sec at > 10 Hz
    Battery LifeAlkaline~400 hours typical, without backlight
    Shock1 Meter drop per IEC 61010–1:2001
    VibrationPer MIL–PRF–28800 for a Class 2 instrument
    • TL75 Test Leads
    • AC175 Alligator Clips
    • Holster
    • 9V Battery (Installed)
    • 80BK Temperature Probe

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #

      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form