FLUKE 62MAX+-323-1AC IR Thermometer, Clamp Meter and Voltage Detector Kit

Model # 62MAX+-323-1AC

Fluke 62 MAX+. Small in size. Big on toughness.
- Dust and water-resistant: IP54 rated.
- Rugged: 3-meter (9.8-foot) drop tested.
- Ergonomically designed: Completely redesigned for a more natural hand fit.
- Distance to spot: 12:1.
- Dual lasers: Identifies area to be measured.
- Large, backlit display: Makes data easier to read, even in dark areas.
Fluke 323 True-rms Clamp Meter.Rugged. Reliable. Precise.
- 400 A AC current measurement.
- 600 VAC and DC voltage measurement.
- True RMS AC voltage and current for accurate measurements on non-linear signals.
- Resistance measurement up to 40 kΩ with continuity detection.
- Slim, ergonomic design.
- CAT IV 300V/CAT III 600 V safety rating.
Fluke 1AC II VoltAlert™ Voltage Detector
- Voltbeat™ technology and continuous self-test, so always know it’s working.
- Upon detection, tip glows and beeper sounds.
- Voltage detection of 90 to 1000 VAC.
- CAT IV 1000 V for added protection.
Fluke C115 Soft Case
- Lightweight soft case to provide optimal protection and accessory storage.

Temperature Range	-22 to 1202°F (-30 to 650°C)
Accuracy	±34.7°F (±1.5°C) or ±1.5% of reading, whichever is greater 14 to 32°F (-10 to 0°C): ±2.0 -22 to 14°F (-30 to -10°C): ±3.0
Response Time (95%)	<500 ms (95% of reading)
Spectral Response	8 to 14 microns
Emissivity	0.10 to 1.00
Optical Resolution	12:1 (calculated at 90% energy)
Display Resolution	0.2°F (0.1°C)
Repeatability of Readings	±0.8% of reading or <±2°F (1.0°C), whichever is greater
Power	AA Battery
Battery Life	8 hours with laser and backlight on
Operating Temperature	32 to 122°F (0 to 50°C)
Storage Temperature	-4 to 140°F (-20 to 60°C), without battery
Operating Humidity	10% to 90% RH non-condensing at 86°F (30°C)
Operating Altitude	6561.7′ (2000 m) above mean sea level
Storage Altitude	39,370.08′ (12,000 m) above mean seal level
Drop Test	9.8′ (3 m)
Dimensions	6.88 x 3.34 x 2.95″ (175 x 85 x 75 mm)
Weight	0.56 lbs (255 g)
IP Rating	IP 54 per IEC 60529
Vibration and Shock	IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMC	EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval	Compliance: EN/IEC 61010-1: 2001 Laser safety: FDA and EN 60825-1 Class II