FLUKE 1587T Insulation Multimeter (Telecom)

Model # 1587T

True RMS measurements
Insulation test voltages (50V and 100V, only)
For use in Telecom industry
Large, backlit display
Insulation test range 0.01 MO – 2 GO
Live circuit detection prevents insulation test when voltages is above 30V
Auto-discharge of capacitive voltage
AC/DC voltage, DC milliVolts, AC/DC milliamps, resistance and continuity, capacitance, diode test, temperature, Min/Max, frequency
Filter for motor drive measurements
Auto power off to save battery power
CAT III 1000 V, CAT IV 600 V measurement category

AC Voltage Measurement
Range	600.0mV, 6.000, 60.00, 600.0, 1000V
Resolution	0.1mV, 0.001, 0.01, 0.1, 1V
50 to 60 Hz ±(% of Rdg + counts)	600.0mV, 6.000, 60.00, 600.0V: ±(1% + 3) 1000V: ±(2% + 3)
60 to 5000 Hz ±(% of Rdg + counts)	00.0mV, 6.000, 60.00, 600.0, 1000V: ±(2% + 3)
DC Voltage Measurement
Range	6.000, 60.00, 600.0, 1000V
Resolution	0.001, 0.01, 0.1, 1V
Accuracy ±(% of Rdg + counts)	6.000, 60.00, 600.0, 1000V: ±(0.09% + 2)
General Specifications
Storage Temperature	-40 to 140°F (-40 to 60°C)
Operating Temperature	-4 to 131°F (-20 to 55°C)
Power Supply	4 x “AA” Batteries (NEDA 15A or IEC LR6)
Battery Life	Meter Use: 1000 hours Insulation Test Use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Size	5.0 x 10.0 x 20.3cm (1.97 x 3.94 x 8.00″)
Weight	550g (1.2lb)