• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Power Quality Analyzers

    Shop our selection of Power Quality Analyzers from our retail outlets across Dubai & UAE - AABTools



    Categories

    FLUKE 345 - Power Quality Clamp Meter
      FLUKE - Power Quality Clamp Meter Model # 345

     
    • Combined functionality clamp meter – oscilloscope; power analyzer and clamp all in one
    • Extensive datalogging memory
    • Wide current measurement range
    FLUKE 434-II-INTL - Power Quality and energy analyzer
      FLUKE - Power Quality and energy analyzer Model # 434-II-INTL

     
    • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
    • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
    • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
    FLUKE 435-II-INTL - Advanced Power Quality and energy analyzer
      FLUKE - Advanced Power Quality and energy analyzer Model # 435-II-INTL

     
    • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
    • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
    • Automatic Trending: Every measurement is always automatically recorded, without any set-up.
    FLUKE 437-II-INTL - 400 Hz Power Quality and Energy Analyzer
      FLUKE - 400 Hz Power Quality and Energy Analyzer Model # 437-II-INTL

     
    • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
    • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
    • Power Inverter Efficiency
    FLUKE 438-II-INTL - Power Quality & Motor Analyzer
      FLUKE - Power Quality & Motor Analyzer Model # 438-II-INTL

     
    • Measure key parameters on direct-on-line motors and motors driven by specific variable frequency drive systems.
    • Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines
    • Calculate mechanical power and efficiency without the need of mechanical sensors.
    EXTECH PQ3450 - 3-Phase Power Analyzer/Datalogger / CAT III 600V
    PCE Instruments PA 8000 - Three-Phase Power Analyzer with 3 Current Clamp
      PCE Instruments - Three-Phase Power Analyzer with 3 Current Clamp Model # PA 8000

     
    • A unit that is able to measure and record the power in both single-phase or three-phase circuits. With the PCE-PA 8000 Clamp Meter you will be able to perform prolonged measurements.
    • Measurement values are saved in .xls format on the included SD card of our Clamp Meter to be easily analyzed on the computer. Measurement sample rate can be set from 2 to 7200 seconds.
    • It can also measure power and determine both power factor and phase angle. The clamps of the PCE-PA 8000 Clamp Meter can be used for cables with a diameter of 50 mm/2.0 in.
    PCE Instruments PA 8300 - Three-Phase Power Analyzer with 3 Current Clamps
      PCE Instruments - Three-Phase Power Analyzer with 3 Current Clamps Model # PA 8300

     
    • It features a durable enclosure, SD card memory, a LCD graphic display, as well as apparent, effective, and reactive power measurement.
    • The easy-to-use unit is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity.
    • Includes 3 current clamps for measurements up to 1200 A AC
    • Voltage measurement range of 10 V to 600 V AC
    • Current measurement range of 20 A to 1200 A AC (Set 1) or 30 A to 3000 A AC (Set 2)
    • Performance measurement range of 0 kW to 9.999 MW (VA/VAR)
    PCE Instruments 830-3 - Three-Phase Power Analyzer
      PCE Instruments - Three-Phase Power Analyzer Model # 830-3

     
    • Measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics.
    • Interference, such as interruptions, leaks, overloads, or transience (from 16 ┬Ás) are detected with their corresponding values.
    • The backlit LCD, with high resolution, can show up to 35 parameters simultaneously. Up to 3 clips can be attached at the same time to the Power Analyzer.
    FLUKE 1773 - Three-Phase Power Quality Analyzers
      FLUKE - Three-Phase Power Quality Analyzers Model # 1773

     
    • Comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting
      to industry standards like EN 50160, IEEE 519, and GOST 33073.
    • Capture damaging high-speed transients so you can mitigate their effects before equipment fails.
    • A full range of harmonics is available from the first 50 integer harmonics and from 2 kHz to 30 kHz.
    FLUKE 1773/Basic - Three-Phase Power Quality Analyzers (without Probe)
      FLUKE - Three-Phase Power Quality Analyzers (without Probe) Model # 1773/Basic

     
    • Comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting
      to industry standards like EN 50160, IEEE 519, and GOST 33073.
    • Capture damaging high-speed transients so you can mitigate their effects before equipment fails.
    • A full range of harmonics is available from the first 50 integer harmonics and from 2 kHz to 30 kHz.
    FLUKE 1775 - 1 mHz Three-Phase Power Quality Analyzers
      FLUKE - 1 mHz Three-Phase Power Quality Analyzers Model # 1775

     
    • Comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting
      to industry standards like EN 50160, IEEE 519 and GOST 33073.
    • Capture damaging high-speed transients so you can mitigate their effects before equipment fails.
    • A full range of harmonics is available from the first 50 integer harmonics and from 2 kHz to 30 kHz.
    FLUKE 1775/Basic - 1 mHz Three-Phase Power Quality Analyzers (without Probe)
      FLUKE - 1 mHz Three-Phase Power Quality Analyzers (without Probe) Model # 1775/Basic

     
    • Comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting
      to industry standards like EN 50160, IEEE 519 and GOST 33073.
    • Capture damaging high-speed transients so you can mitigate their effects before equipment fails.
    • A full range of harmonics is available from the first 50 integer harmonics and from 2 kHz to 30 kHz.
    FLUKE 1777 - 20 mHz Three-Phase Power Quality Analyzers
      FLUKE - 20 mHz Three-Phase Power Quality Analyzers Model # 1777

     
    • Comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting
      to industry standards like EN 50160, IEEE 519 and GOST 33073.
    • Capture damaging high-speed transients so you can mitigate their effects before equipment fails.
    • A full range of harmonics is available from the first 50 integer harmonics and from 2 kHz to 30 kHz.
    FLUKE 1777/Basic - 20 mHz Three-Phase Power Quality Analyzers (without Probe)
      FLUKE - 20 mHz Three-Phase Power Quality Analyzers (without Probe) Model # 1777/Basic

     
    • Comes standard with Fluke Energy Analyze Plus software giving you the ability to create customized reports, or leverage built-in one-click reporting
      to industry standards like EN 50160, IEEE 519, and GOST 33073.
    • Capture damaging high-speed transients so you can mitigate their effects before equipment fails.
    • A full range of harmonics is available from the first 50 integer harmonics and from 2 kHz to 30 kHz.

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE