• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Precision Measuring Tools

    Shop our selection of Precision Measuring Tools from our retail outlets across Dubai & UAE - AABTools



    Categories

    GROZ VNC/6 - Vernier Caliper 0 to 6in (0-150mm)
      GROZ - Vernier Caliper 0 to 6in (0-150mm) Model # VNC/6

     
    • Useful for inside and outside measurements, depth & step measurements
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ VNC/8 - Vernier Caliper 0 to 8in (0-200mm)
      GROZ - Vernier Caliper 0 to 8in (0-200mm) Model # VNC/8

     
    • Useful for inside and outside measurements, depth & step measurements
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ VNC/12 - Vernier Caliper 0 to 12in (0-300mm)
      GROZ - Vernier Caliper 0 to 12in (0-300mm) Model # VNC/12

     
    • Useful for inside and outside measurements, depth & step measurements
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ DLC/150 - Dial Caliper 0-150mm
      GROZ - Dial Caliper 0-150mm Model # DLC/150

     
    • Vernier Calipers with a large & clear dial read off
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ DLC/200 - Dial Caliper; 0-200mm
      GROZ - Dial Caliper; 0-200mm Model # DLC/200

     
    • Vernier Calipers with a large & clear dial read off
    • Hardened stainless steel construction in satin chrome finish
    • Vernier scale etched with permanent black graduations allows precise & convenient reading
    GROZ EDC/6 - Electronic Caliper; 0-6in (0-150mm)
      GROZ - Electronic Caliper; 0-6in (0-150mm) Model # EDC/6

     
    • Freewheeling thumb roller mechanism for smooth movement along the linear scale
    • Convenient to use locking screw to set calipers at any desired position
    • Measurement can be zero set at any position along the scale for incremental measurements
    GROZ EDC/8 - Electronic Caliper; 0-8in ( 0-200mm)
      GROZ - Electronic Caliper; 0-8in ( 0-200mm) Model # EDC/8

     
    • Freewheeling thumb roller mechanism for smooth movement along the linear scale
    • Convenient to use locking screw to set calipers at any desired position
    • Measurement can be zero set at any position along the scale for incremental measurements
    GROZ EDC/12 - Electronic Caliper; 0-12in (0-300mm)
      GROZ - Electronic Caliper; 0-12in (0-300mm) Model # EDC/12

     
    • Freewheeling thumb roller mechanism for smooth movement along the linear scale
    • Convenient to use locking screw to set calipers at any desired position
    • Measurement can be zero set at any position along the scale for incremental measurements
    GROZ MM/0-25 - Outside Micrometer, 0 – 25mm
      GROZ - Outside Micrometer, 0 – 25mm Model # MM/0-25

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/25-50 - Outside Micrometer; 25 – 50mm
      GROZ - Outside Micrometer; 25 – 50mm Model # MM/25-50

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/75-100 - Outside Micrometer; 75 – 100mm
      GROZ - Outside Micrometer; 75 – 100mm Model # MM/75-100

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/0-100/ST4 - Outside Micrometer Set 4pcs; 0-100mm
      GROZ - Outside Micrometer Set 4pcs; 0-100mm Model # MM/0-100/ST4

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MM/0-150/ST6 - Outside Micrometer Set 6pcs; 0-150mm
      GROZ - Outside Micrometer Set 6pcs; 0-150mm Model # MM/0-150/ST6

     
    • Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    • Hardened spindle with precisely cut threads for smooth movement and high accuracy
    GROZ MMED/1 - Electronic Micrometer; 0-1in (0-25mm); IP54
      GROZ - Electronic Micrometer; 0-1in (0-25mm); IP54 Model # MMED/1

     
    • Superior tool designed to measure, record & display dimensions in inches & mm
    • Extra large, high contrast LCD digital read out
    • Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time
    GROZ CSQ/12/4/ST - Combination Square Set 4pcs; 12in/300mm
      GROZ - Combination Square Set 4pcs; 12in/300mm Model # CSQ/12/4/ST

     
    • An exceptional set which combines several tools, substituting the use of try squares, miter, depth gauge, height gauge, marking gauge, level, plumb & a precision rule
    • Constructed from Quality Cast Iron & complete with precision rule 12″ (300 mm) long
    • Center Head: Used for accurately locating center of a cylindrical or square work piece
    GROZ DLG/10 - Dial Indicator; 0-10mm; AGD2
      GROZ - Dial Indicator; 0-10mm; AGD2 Model # DLG/10

     
    • Each revolution is indicated by a revolution counter
    • 8mm stem diameter for metric models and 3/8″ for inch sizes
    • Robust construction, mechanical dial indicator with bottom plunger
    GROZ DGI/1 - Digital Indicator;  0-12.5mm/0-0.5in
      GROZ - Digital Indicator; 0-12.5mm/0-0.5in Model # DGI/1

     
    • A very versatile range of digital indicators available in two levels of precision – Standard & High Accuracy
    • Suitable for both inch & metric measurements
    • Useful for absolute & tolerance measurement which allows for measure of upper & lower tolerances
    GROZ MB/30 - Articulating Arm; W/M. Base Type1; 180mm
      GROZ - Articulating Arm; W/M. Base Type1; 180mm Model # MB/30

     
    • Equipped with convenient ON/OFF control switch
    • Three precision ground magnetic surfaces allow these to be used horizontally, vertically or even upside down
    • Articulating arm type: 3 articulating joints lockable using a single knob. Suitable for 3/8” & 8 mm stems & test indicators with dovetail clamping mechanism
    GROZ ID/10 - Inside Caliper 10in / 250mm
      GROZ - Inside Caliper 10in / 250mm Model # ID/10

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ ID/6 - Inside Caliper  6in / 150mm
      GROZ - Inside Caliper 6in / 150mm Model # ID/6

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ ID/8 - Inside Caliper 8in / 200mm
      GROZ - Inside Caliper 8in / 200mm Model # ID/8

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ OD/10 - Outside Caliper 10in / 250mm
      GROZ - Outside Caliper 10in / 250mm Model # OD/10

     
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    • Divider points are hardened 50-55 HRC for increased wear resistance
    • The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs
    GROZ OD/12 - Outside Caliper 12in / 300mm
      GROZ - Outside Caliper 12in / 300mm Model # OD/12

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • The legs pivot on a roller and are tensioned by bow spring. The fulcrum stud has a large bearing surface that prevents side deflection of legs
    GROZ OD/6 - Outside Caliper 6in / 150mm
      GROZ - Outside Caliper 6in / 150mm Model # OD/6

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ OD/8 - Outside Caliper 8in / 200mm
      GROZ - Outside Caliper 8in / 200mm Model # OD/8

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ ID/12 - Inside Caliper 12in / 300mm
      GROZ - Inside Caliper 12in / 300mm Model # ID/12

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ DD/6 - Spring Divider  6″ / 150mm
      GROZ - Spring Divider 6″ / 150mm Model # DD/6

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ DD/8 - Spring Divider  8in / 200mm
      GROZ - Spring Divider 8in / 200mm Model # DD/8

     
    • Calipers are one of the oldest type of comparison measuting tools. These are designed for taking comparitive measurements and transferring the dimensions to a micrometer, precision rule etc.
    • Dividers are used for marking out circles on steel or transferring measurement from master templates
    • Adjustment is made by opening and closing of the legs by means of an adjusting nut
    GROZ WCF/WZ-6 - Center Finder Contour Set 4Pc Set
      GROZ - Center Finder Contour Set 4Pc Set Model # WCF/WZ-6

     
    • Wiggler with Disc Contact is particularly useful in locating work in confined areas such as slots or shallow holes. Diameter of Disc. 0.1″
    • Wiggler with Offset Indicator holder is useful for checking run out or concentricity and in checking straightness or alignment of flat surfaces
    • Wiggler with Ball Contact is useful in locating work by first bringing the ball contact against the work and then indexing it to the desired position relative to the spindle
    EXPERT E140601 - Measuring Vernier Caliper 6in
      EXPERT - Measuring Vernier Caliper 6in Model # E140601

     
    • Measurement capacity: 150 mm.
    • Interior; exterior and depth measurement.
    • Supplied in protection cover with compliance certificate.
    GAZELLE G80258 - 10 In. Inside Caliper (250mm)
      GAZELLE - 10 In. Inside Caliper (250mm) Model # G80258

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80259 - 12 In. Inside Caliper (300mm)
      GAZELLE - 12 In. Inside Caliper (300mm) Model # G80259

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80260 - 6 In. Inside Caliper (150mm)
      GAZELLE - 6 In. Inside Caliper (150mm) Model # G80260

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80261 - 8 In. Inside Caliper (200mm)
      GAZELLE - 8 In. Inside Caliper (200mm) Model # G80261

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80262 - 10 In. Outside Caliper (250mm)
      GAZELLE - 10 In. Outside Caliper (250mm) Model # G80262

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80263 - 12 In. Outside Caliper (300mm)
      GAZELLE - 12 In. Outside Caliper (300mm) Model # G80263

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80264 - 6 In. Outside Caliper (150mm)
      GAZELLE - 6 In. Outside Caliper (150mm) Model # G80264

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80265 - 8 In. Outside Caliper (200mm)
      GAZELLE - 8 In. Outside Caliper (200mm) Model # G80265

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80266 - 6 In. Spring Divider (150mm)
      GAZELLE - 6 In. Spring Divider (150mm) Model # G80266

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80267 - 8 In. Spring Divider (200mm)
      GAZELLE - 8 In. Spring Divider (200mm) Model # G80267

     
    • Made of high grade polished steel
    • Legs are well finished and balanced
    • Spring is hardened and tempered
    GAZELLE G80296 - 6 In. Digital Vernier Caliper (150mm)
      GAZELLE - 6 In. Digital Vernier Caliper (150mm) Model # G80296

     
    • Digital Vernier Caliper

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE