• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Chisels and Punches

    Shop our selection of Chisels and Punches from our retail outlets across Dubai & UAE - AABTools



    Categories

    GROZ CRP/250-16 - Concrete Point Chisel 10in X 5/8in
      GROZ - Concrete Point Chisel 10in X 5/8in Model # CRP/250-16

     
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    • Shank is powder coated and the cutting edge is accurately ground.
    • The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    GROZ CRP/300-19 - Concrete Point Chisel 12in X 3/4in
      GROZ - Concrete Point Chisel 12in X 3/4in Model # CRP/300-19

     
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    • Shank is powder coated and the cutting edge is accurately ground.
    • The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    GROZ CHS/ST/6/1-2 - Cold Flat Chisel 6in X 1/2in Blade
      GROZ - Cold Flat Chisel 6in X 1/2in Blade Model # CHS/ST/6/1-2

     
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    • Shank is powder coated and the cutting edge is accurately ground.
    • The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    GROZ CHS/ST/8/3-4 - Cold Flat Chisel 8in X 3/4in Blade
      GROZ - Cold Flat Chisel 8in X 3/4in Blade Model # CHS/ST/8/3-4

     
    • The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly.
    • The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    GROZ CHS/ST/10/3-4 - Cold Flat Chisel 10in X 3/4in Blade
      GROZ - Cold Flat Chisel 10in X 3/4in Blade Model # CHS/ST/10/3-4

     
    • The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly.
    • Precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    GROZ CHS/ST/12/3-4 - Cold Flat Chisel 12in X 3/4in Blade
      GROZ - Cold Flat Chisel 12in X 3/4in Blade Model # CHS/ST/12/3-4

     
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    • Shank is powder coated and the cutting edge is accurately ground.
    • The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    GROZ CHS/ST/12/0-1 - Cold Flat Chisel 12in X 1in Blade
      GROZ - Cold Flat Chisel 12in X 1in Blade Model # CHS/ST/12/0-1

     
    • Hardness at striking end is maintained under 42 HRC to prevent chipping, splintering etc.
    • Shank is powder coated & cutting edge is accurately ground
    • Cutting edge is hardened 52-58 HRC for consistent performance over time
    GROZ CHS/ST/10/3-4/GRP - Cold Flat Chisel W/Grip  10in X 3/4in
      GROZ - Cold Flat Chisel W/Grip 10in X 3/4in Model # CHS/ST/10/3-4/GRP

     
    • The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly.
    • Precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    GROZ CHS/ST/12/0-1/GRP - Cold Flat Chisel W/Grip  12in X 1in
      GROZ - Cold Flat Chisel W/Grip 12in X 1in Model # CHS/ST/12/0-1/GRP

     
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    • Shank is powder coated and the cutting edge is accurately ground.
    • The precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    GROZ CHS/ST/18/3-4/GRP - Cold Flat Chisel W/Grip 18in X 3/4in
      GROZ - Cold Flat Chisel W/Grip 18in X 3/4in Model # CHS/ST/18/3-4/GRP

     
    • The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly.
    • Precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    GROZ CHS/ST/6/ST - Cold Flat Chisel Set 6-Pc
      GROZ - Cold Flat Chisel Set 6-Pc Model # CHS/ST/6/ST

     
    • Precisely ground cutting edge is induction hardened (52 – 58 HRC) to give improved performance over longer periods of time.
    • Hardness at the striking end is maintained to under 42 HRC, so that the head will not splinter when subject to hammer blows.
    • The alloy content in these makes them ideal for all types of metalworking and masonry applications and also increases wear resistance significantly.
    GROZ CP/5-32 - Centre Punch Round Head 4mm X 100mm
      GROZ - Centre Punch Round Head 4mm X 100mm Model # CP/5-32

     
    • Ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
    • Working tips are centered and ground to the correct angle (90° included angle) for increased efficiency in marking.
    • The striking end is chamfered to prevent breakage.
    GROZ CP/1-4 - Centre Punch Round Head 6mm X 125mm
      GROZ - Centre Punch Round Head 6mm X 125mm Model # CP/1-4

     
    • Ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
    • Working tips are centered and ground to the correct angle (90° included angle) for increased efficiency in marking.
    • The striking end is chamfered to prevent breakage.
    GROZ CP/5/ST - Centre Punch Set 5pcs; 1/6in to 5/32in
      GROZ - Centre Punch Set 5pcs; 1/6in to 5/32in Model # CP/5/ST

     
    • Ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
    • Working tips are centered and ground to the correct angle (90° included angle) for increased efficiency in marking.
    • The striking end is chamfered to prevent breakage.
    GROZ CP/HD/ST-5 - H. Duty Centre Punch Set  5-Pcs;  5/64in to 3/8in
      GROZ - H. Duty Centre Punch Set 5-Pcs; 5/64in to 3/8in Model # CP/HD/ST-5

     
    • Ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
    • Working tips are centered and ground to the correct angle (90° included angle) for increased efficiency in marking.
    • The striking end is chamfered to prevent breakage.
    GROZ ACP/1/B - Automatic Centre Punch 1/2in
      GROZ - Automatic Centre Punch 1/2in Model # ACP/1/B

     
    • The depth of the impression is variable and can be adjusted from light marking to heavy blows by turning the knurled head.
    • These have a round shank with clean and well cut knurling for positive nonslip grip.
    • Tips are made from hardened tool steel and can be easily removed for re-sharpening or replacement
    GROZ KIT/14/ST - Punch & Chisel Kit 14pcs
      GROZ - Punch & Chisel Kit 14pcs Model # KIT/14/ST

     
    • These kits are packed in heavy-duty vinyl rolls for easy access, organization and storage
    • A range of kits carefully thought about, keeping in mind the needs of the journeyman… the farmer or rancher…. the mechanic ….the carpenter.
    • This is an excellent way to keep your tools organized.
    GROZ KIT/24/ST - Punch & Chisel Kit 24pcs
      GROZ - Punch & Chisel Kit 24pcs Model # KIT/24/ST

     
    • These kits are packed in heavy-duty vinyl rolls for easy access, organization and storage
    • A range of kits carefully thought about, keeping in mind the needs of the journeyman… the farmer or rancher…. the mechanic ….the carpenter.
    • This is an excellent way to keep your tools organized.
    GROZ KIT/26/ST - Punch & Chisel Set 26pc
      GROZ - Punch & Chisel Set 26pc Model # KIT/26/ST

     
    • These kits are packed in heavy-duty vinyl rolls for easy access, organization and storage
    • A range of kits carefully thought about, keeping in mind the needs of the journeyman… the farmer or rancher…. the mechanic ….the carpenter.
    • This is an excellent way to keep your tools organized.
    GROZ HPL/10-ST - Hollow Punch Set 10-Pc
      GROZ - Hollow Punch Set 10-Pc Model # HPL/10-ST

     
    • Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life
    • These punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material
    GROZ HPL/14-ST - Hollow Punch Set 14-Pc
      GROZ - Hollow Punch Set 14-Pc Model # HPL/14-ST

     
    • Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life
    • These punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material
    GROZ PPR/6/ST - Pin Punch Set 6-Pc
      GROZ - Pin Punch Set 6-Pc Model # PPR/6/ST

     
    • These round shank pin punches have clean and well cut knurling which provides positive, non slip grip.
    • Pin Punches 4″ (100 mm) long
    • Pin Punches 6″ (150 mm) long
    GROZ PP/HD/6/ST - H. Duty Pin Punch Set 6-Pc
      GROZ - H. Duty Pin Punch Set 6-Pc Model # PP/HD/6/ST

     
    • Induction hardened to ensure consistent hardness and a special tempering process prevents the head from fracturing, thereby preventing accidents
    • Manufactured from high quality carbon steel, accurately hardened and tempered so that the Pin will withstand continuous use and the striking end will not splinter.
    GROZ LP/10 - Letter Punch  3/8in / 10mm
      GROZ - Letter Punch 3/8in / 10mm Model # LP/10

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ LP/12 - Letter Punch 1/2in / 12mm
      GROZ - Letter Punch 1/2in / 12mm Model # LP/12

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ LP/5 - Letter Punch 3/16in / 5mm
      GROZ - Letter Punch 3/16in / 5mm Model # LP/5

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ LP/6 - Letter Punch 1/4in / 6mm
      GROZ - Letter Punch 1/4in / 6mm Model # LP/6

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    GROZ LP/8 - Letter Punch 5/16in / 8mm
      GROZ - Letter Punch 5/16in / 8mm Model # LP/8

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ NP/10 - Number Punch 3/8in / 10mm
      GROZ - Number Punch 3/8in / 10mm Model # NP/10

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ NP/12 - Number Punch 1/2in / 12mm
      GROZ - Number Punch 1/2in / 12mm Model # NP/12

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ NP/5 - Number Punch 3/16in / 5mm
      GROZ - Number Punch 3/16in / 5mm Model # NP/5

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    GROZ NP/6 - Number Punch 1/4in / 6mm
      GROZ - Number Punch 1/4in / 6mm Model # NP/6

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    GROZ NP/8 - Number Punch 5/16in /  8mm
      GROZ - Number Punch 5/16in / 8mm Model # NP/8

     
    • Stamping end is hardened 58-62 HRC
    • Striking end tempered 38-43 HRC – prevents splintering
    • Induction hardened for durability & extended Life
    EXPERT E150501 - Center Punch 2.5mm
      EXPERT - Center Punch 2.5mm Model # E150501

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E150502 - Center Punch 4mm
      EXPERT - Center Punch 4mm Model # E150502

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E150503 - Automatic Center Punch 4mm
      EXPERT - Automatic Center Punch 4mm Model # E150503

     
    • Hardness 56-61 for the tip.
    • Trigger load E150503: 6 to 12.5 kg – E150504: 12.2 to 18.5 kg.
    • Bronze shaft
    EXPERT E150504 - Automatic Center Punch 7mm
      EXPERT - Automatic Center Punch 7mm Model # E150504

     
    • Hardness 56-61 for the tip.
    • Trigger load E150503: 6 to 12.5 kg – E150504: 12.2 to 18.5 kg.
    • Bronze shaft
    EXPERT E150701 - Extra Flat Slim-Profile Chisel  26mm
      EXPERT - Extra Flat Slim-Profile Chisel 26mm Model # E150701

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E150702 - Constant Profile Flat Chisel 21mm
      EXPERT - Constant Profile Flat Chisel 21mm Model # E150702

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E150703 - Constant Profile Flat Chisel 24mm
      EXPERT - Constant Profile Flat Chisel 24mm Model # E150703

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E150704 - Constant Profile Flat Chisel 27mm
      EXPERT - Constant Profile Flat Chisel 27mm Model # E150704

     
    • DIN 7255
    • Treated for 54-58 HRC on cutting edge.
    EXPERT E418226 - Drift Punches Set 6 Pcs
      EXPERT - Drift Punches Set 6 Pcs Model # E418226

     
    • DIN 6450
    • 6 drift punches 2 to 8 mm.
    EXPERT E418227 - Center Punch 6mm
      EXPERT - Center Punch 6mm Model # E418227

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E418228 - Center Punch 8mm
      EXPERT - Center Punch 8mm Model # E418228

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.
    EXPERT E418230 - Drift Punch 2mm
      EXPERT - Drift Punch 2mm Model # E418230

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418231 - Drift Punch 3mm
      EXPERT - Drift Punch 3mm Model # E418231

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418232 - Drift Punch 4mm
      EXPERT - Drift Punch 4mm Model # E418232

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418233 - Drift Punch 5mm
      EXPERT - Drift Punch 5mm Model # E418233

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418234 - Drift Punch 6mm
      EXPERT - Drift Punch 6mm Model # E418234

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418235 - Drift Punch  8mm
      EXPERT - Drift Punch 8mm Model # E418235

     
    • Hardness 48-56 HRc for 2 to 4 mm diameter; and 50-58 HRc for 5 to 8 mm diameter.
    • One-piece for enhanced strength and durability.
    EXPERT E418236 - Center Punch 10mm
      EXPERT - Center Punch 10mm Model # E418236

     
    • Hardness 34-44 for the impact zone and 50-58 for the tip.
    • One-piece for enhanced strength and durability.

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE