PCE Instruments 009 Thermal Anemometer

Model # 009

This Anemometer meter is very economical. With this Anemometer meter you can measure wind speed and air temperature.
Once you have the right cross section, the Anemometer meter will show the air volume flow. The readings can be stored in the device and then transferred to a computer for further analysis.
As such, you can take a series of measurements with the Anemometer meter off-site, then look closely at the data once back at the office. In this way, you save time and maintain a high level of accuracy in readings.

This Anemometer meter is very economical. With this Anemometer meter you can measure wind speed and air temperature.
Once you have the right cross section, the Anemometer meter will show the air volume flow. The readings can be stored in the device and then transferred to a computer for further analysis.
As such, you can take a series of measurements with the Anemometer meter off-site, then look closely at the data once back at the office. In this way, you save time and maintain a high level of accuracy in readings.
The external impeller, connected by a 1.5 m / 4.9 ft long cable, increases the mobility and flexibility of measurements of wind speed. These Anemometer meters form a part of the basic equipment of an installation technician for ventilation systems.
The useful life of the battery is approx. 50 hours with a current of 300-mA/h. If you wish to take timed measurements over a period of time longer than 2 days, you will need to use a battery pack, or a power adapter.
Measures air velocity and temperature
Calculates volume of air current as well as average volume of air current
Can be used for low air velocity
Different units of measurement: m/s, km/h, ft/min, knots, miles/h
Large LCD
Easy to use
Shows minimum and maximum value
Save function for minimum and maximum values
Auto shut-off function to protect battery life
Has an RS-232 interface for data transfers to acomputer
Comes with a telescopic sensor, batteries, carrying case, software, RS-232 cable and
user’s manual

Indication (Digital/Analogue)	Digital
Measurement air speed (Y/N)	Y
Measurement volume flow (Y/N)	N
Measured value memory (Y/N)	N
Interface (Y/N)	Y
Display	Large 58 x 34 mm / 2.3 x 1.4 in LCD
Operating conditions (Device)	0°C – 40°C / 32 – 104°F, <80% r.h.
Operating conditions (Thermal Sensor)	0°C – 50°C / 32 – 122°F, <80% r.h.
Power	4 batteries (1.5V) (or by way of an optional mains adaptor of 9V)
Auto shut-off	Yes, 5 minutes to protect battery power
Dimensions (Device)	203 x 76 x 38 mm / 8 x 3 x 1.5 in
Dimensions (Thermal Sensor)	8 mm / .3 in diameter x 940 mm / 37 in maximum extended length (only 280 mm / 11 in when contracted)
Enclosure	ABS plastic
Weight	515 g / 1.1 lbs

1 x PCE-009 Thermal Anemometer with thermal sensor and 1.5 m / 4.9 ft connector cable
1 x RS-232 cable
1 x Software
4 x Batteries
1 x Carrying case
1 x User’s manual