See More, Fix More with the Two-Channel CAT IV Rated Fluke ScopeMeter® 190-502
The Fluke ScopeMeter® 190-502 combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter® test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.
The 190-502 ScopeMeter® is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:
Why choose the new 500 MHz two-channel ScopeMeter® test tool?
A faster sample rate and higher bandwidth means greater accuracy and clarity. The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.
Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating
The Fluke ScopeMeter® 190-502 portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.
Three-dimensional testing for industrial systems
Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:
Three-phase testing for diagnosing VSD, power inverters, and converters
Safely measure from mV to kV
Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.
Take on the Harshest Conditions with the only IP-51-rated Scope on the Market
Rugged and shock-proof, all ScopeMeter® portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.
Built in multimeter to quickly and conveniently perform precise measurements
Built-in digital multimeter 2 channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.
Work a Full Shift on a Single Charge
New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.
Capture and Share Waveforms Easily with New USB connectivity
Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.
See a Stable Display Instantly with Connect-and-View&trade Triggering
Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.
Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™
ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)
|Number of channels||500 MHz: 2 channels|
|Real-time sample rate||5 GS|
|Inputs||2 scope plus DMM input|
|Independently floating isolated inputs||Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground|
|Timebase range||10 ns – 2 min/div|
|Input sensitivity||2 mV-100 V/div|
|Trigger types||Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle|
|Trigger source||Any scope input channel, or external via DMM input|
|Glitch capture||8 ns|
|Scope measurements||Cursor: 7|
|Maximum record length||ScopeRecord mode: 30,000 pts|
|Scope mode: 10,000 pts per input|
|Persistence||Digital persistence giving analog oscilloscope-like waveform decay|
|Waveform compare||Waveform reference with automatic Pass/Fail testing|
|Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)||4 mm banana inputs, fully isolated from scope inputs and from scope ground|
|Maximum resolution||5000 counts|
|Measurements||VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)|
|Screen + Setup: 30|
|Display||153 mm full color LCD with fast update rate|
|Operating temperature||0 °C to 40 °C Including Batteries|
|0 °C to 50 °C Excluding Batteries|
|Storage temperature||-20 °C to +60 °C|
|Operating altitude||Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V|
|Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V|
|Electrical safety||1,000 V CAT III/600V CAT IV (EN61010-1)|
|Mechanical and General Specifications|
|Size||270 x 190 x 70 mm|
|Warranty||3-years on main instrument, 1-year on accessories|
|Li-Ion battery||BP290 2400 mAh Li-ion battery up to 4 hours included standard|
|VPS410 Voltage Probe Sets (one red, one blue)|
|TL175 TwistGuard™ safety designed Test Lead Set (red and black)|
|BC190 Battery Charger/mains Adapter|
|BP290 2400 mAh Li-ion Battery|
|Handstrap (affixed to instrument)|
|Multi-Language User Manuals on CD-Rom|
|FlukeView ScopeMeter® demo package (restricted functionality)|
|USB Interface Cable|
|Warranty||Three years on main instrument, one year on accessories|
Product selected: Model #
*Demonstrations can only be scheduled within the UAE