• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • FLUKE 107 Palm-sized Digital Multimeter – 600V, AC/DC

    # 107

    • Voltage, resistance, continuity, capacitance
    • Input terminal for ac and dc current measurements to 10 A and current
    • Backlit display
    • Data hold
    • Diode test, plus frequency and duty cycle measurements
    FLUKE
    • FLUKE
    • 107

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?
    • Measures voltage, resistance, continuity, capacitance, diode test, plus frequency and duty cycle
    • Data hold
    • Backlit display
    • 6000 count Display (LCD), updates 3/sec
    • Input terminal for ac and dc current measurements to 10 A and current
    Accuracy Specifications
    Function Range Resolution Accuracy
    AC Volts
    (40 Hz to 500Hz)1
    6.000 V
    60.00 V
    600.0 V
    0.001 V
    0.01 V
    0.1 V
    1.0 % + 3
    DC Volts 6.000 V
    60.00 V
    600.0 V
    0.001 V
    0.01 V
    0.1 V
    0.5 % + 3
    AC Millivolts 600.0 mV 0.1 mV 3.0 % + 3
    Diode Test2 2.000 V 0.001 V 10 %
    Resistance
    (Ohms)
    400.0 Ω
    4.000 kΩ
    40.00 kΩ
    400.0 kΩ
    4.000 MΩ
    40.00 MΩ
    0.1 Ω
    0.001 kΩ
    0.01 kΩ
    0.1 kΩ
    0.001 MΩ
    0.01 MΩ
    0.5 % + 3
    0.5 % + 2
    0.5 % + 2
    0.5 % + 2
    0.5 % + 2
    1.5% + 3
    Capacitance3 50.00 nF
    500.0 nF
    5.000 μF
    50.00 μF
    500.0 μF
    1000 μF
    0.01 nF
    0.1 nF
    0.001 μF
    0.01 μF
    0.1 μF
    1 μF
    2 % + 5
    2 % + 5
    5 % + 5
    5 % + 5
    5 % + 5
    5 % + 5
    Frequency4
    Hz
    (10 Hz – 100 kHz)
    50.00 Hz
    500.0 Hz
    5.000 kHz
    50.00 kHz
    100.0 kHz
    0.01 Hz
    0.1 Hz
    0.001 kHz
    0.01 kHz
    0.1 kHz
    0.1 % + 3
    Duty Cycle4 1 % to 99 % 0.1 % 1 % typical 5
    AC Current
    (40 Hz to 200 Hz)
    4.000 A
    10.00 A
    0.001 A
    0.01 A
    1.5 % + 3
    DC Current 4.000 A
    10.00 A
    0.001 A
    0.01 A
    1.5 % + 3
    1. All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
    2. Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
    3. Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).
    4. All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
    5. Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10 % and 90 %
    Function Overload Protection Input Impedance (Nominal) Common Mode Rejection Ratio Normal Mode Rejection Ratio
    AC Volts 600 V 1 >10 MΩ <100 pF 2 >60 dB at dc,
    50 Hz or 60 Hz
    AC Millivolts 600 mV >1M, <100 pF >80 dB at 50 Hz or 60 Hz
    DC Volts 600 V 1 >10 MΩ <100 pF >100 dB at dc,
    50 Hz or 60 Hz
    >60 dB at 50 Hz or 60 Hz
    1. 6 x 105 V Hz Max
    2. For mV (AC), input impedance is approximately 1 MΩ.
    General Specifications
    Maximum Voltage Between any Terminal and Earth Ground 600 V
    Display (LCD) 6000 counts, updates 3/sec
    Battery Type 2 AAA, NEDA 24A, IEC LR03
    Battery Life 200 hours minimum
    Temperature
    Operating 0 °C to 40 °C
    Storage -30 °C to 60 °C
    Relative Humidity
    Operating Humidity Non-condensing when <10°C
    ≤90 % at 10 °C to 30 °C; ≤75 % at 30 °C to 40 °C
    Operating Humidity, 40 MΩ Range ≤80 % at 10 °C to 30 °C; ≤70 % at 30 °C to 40 °C
    Altitude
    Operating 2000 m
    Storage 12,000 m
    Temperature Coefficient 0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
    Fuse Protection for Current Inputs 11A, 1000V Fast Fuse, Fluke specified part only
    Size (HxWxL) 142 mm x 69 mm x 28mm
    Weight 200 g
    IP Rating IEC 60529: IP 40
    Safety IEC 61010-1: 600 V CAT III, Pollution Degree 2
    Electromagnetic Environment IEC 61326-1: Portable
    Electromagnetic Compatibility Applies to use the Korea only.  Class A Equipment (Industrial Broadcasting and Communication Equipment)1
    1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.
    • Fluke 107 Palm-sized Digital Multimeter with Frequency, Diode Test
    • Tl75 Hard Poin Test Lead Set
    • 2 AAA Batteries (Installed)
    • User’s Manual
    • Smart Strap

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE