• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • FLUKE 15B+ Digital Multimeter 1000V AC/DC

    # 15B+

    • 600 V Cat III safety rating
    • 50% bigger display with bright white backlight
    • Voltage, resistance, continuity, capacitance
    • 600 V Cat III safety rating
    • 50% bigger display with bright white backlight
    • Voltage, resistance, continuity, capacitance
    • Input terminal for ac and dc current measurements to 10 A current
    • Diode test, data hold

    Accuracy Specifications

     

    Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0% to 75%. Accuracy specifications take the form of: ±(% of Reading + Number of Least Significant Digits).

    FunctionRangeResolutionAccuracy
    AC volts
    (40 Hz to 500Hz)1
    4.000 V
    40.00 V
    400.0 V
    1000 V
    0.001 V
    0.01 V
    0.1 V
    1 V
    1.0% + 3
    DC volts4.000 V
    40.00 V
    400.0 V
    1000 V
    0.001 V
    0.01 V
    0.1 V
    1 V
    0.5% + 3
    AC millivolts400.0 mV0.1 mV3.0% + 3
    DC millivolts400.0 mV0.1 mV1.0% + 10
    Diode test22.000 V0.001 V10%
    Resistance
    (Ohms)
    400.0 Ω
    4.000 kΩ
    40.00 kΩ
    400.0 kΩ
    4.000 MΩ
    40.00 MΩ
    0.1 Ω
    0.001 kΩ
    0.01 kΩ
    0.1 kΩ
    0.001 MΩ
    0.01 MΩ
    0.5% + 3
    0.5% + 2
    0.5% + 2
    0.5% + 2
    0.5% + 2
    1.5% + 3
    Capacitance340.00 nF
    400.0 nF
    4.000 μF
    40.00 μF
    400.0 μF
    1000 μF
    0.01 nF
    0.1 nF
    0.001 μF
    0.01 μF
    0.1 μF
    1 μF
    2% + 5
    2% + 5
    5% + 5
    5% + 5
    5% + 5
    5% + 5
    AC current μA
    (40 Hz to 400 Hz)
    400.0 μA
    4000 μA
    0.1 μA
    1 μA
    1.5% + 3
    AC current mA
    (40 Hz to 400 Hz)
    40.00 mA
    400.0 mA
    0.01 mA
    0.1 mA
    1.5% + 3
    AC current A
    (40 Hz to 400 Hz)
    4.000 A
    10.00 A
    0.001 A
    0.01 A
    1.5% + 3
    DC current μA400.0 μA
    4000 μA
    0.1 μA
    1 μA
    1.5% + 3
    DC current mA40.00 mA
    400.0 mA
    0.01 mA
    0.1 mA
    1.5% + 3
    DC current A4.000 A
    10.00 A
    0.001 A
    0.01 A
    1.5% + 3
    BacklightYes
    1All ac, Hz, and duty cycle are specified from 1% to 100% of range. Inputs below 1% of range are not specified.
    2Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
    3Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 40 nF range).
    FunctionOverload protectionInput impedance (Nominal)Common mode rejection ratioNormal mode rejection ratio
    AC volts1000 V 1>10 MΩ <100 pF>60 dB at dc,
    50 Hz or 60 Hz
    AC millivolts400 mV>1MΩ, <100 pF>80 dB at 50 Hz or 60 Hz
    DC volts1000 V 1>10 MΩ <100 pF>100 dB at dc,
    50 Hz or 60 Hz
    >60 dB at 50 Hz or 60 Hz
    DC millivolts400 mV>1MΩ, <100 pF>80 dB at 50 Hz or 60 Hz
    1 106 V Hz Max
    General specifications
    Maximum voltage between any terminal and earth ground1000 V
    Display (LCD)4000 counts, updates 3/sec
    Battery type2 AA, NEDA 15A, IEC LR6
    Battery life500 hours minimum (50 hours in LED Test mode without load. The hours with load depends on the type of LED under test.)
    Temperature
    Operating0 °C to 40 °C
    Storage-30 °C to 60 °C
    Relative humidity
    Operating humidityNon-condensing (<10°C)
    ≤90% RH at 10 °C to 30 °C;
    ≤75% RH at 30 °C to 40 °C
    40 MΩ range
    ≤80% RH at 10 °C to 30 °C;
    ≤70% RH at 30 °C to 40 °C
    Altitude
    Operating2000 m
    Storage12,000 m
    Temperature coefficient0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
    Fuse protection for current inputs440 mA, 1000 V Fast Fuse, Fluke specified part only.
    11A, 1000V Fast Fuse, Fluke specified part only.
    Size (H x W x L)183 x 91 x 49.5 mm
    Weight455 g
    IP ratingIP 40
    SafetyIEC 61010-1, IEC61010-2-030 CAT III 600 V, CAT II 1000 V, Pollution Degree 2
    Electromagnetic environmentIEC 61326-1: Portable
    Electromagnetic compatibilityApplies to use in Korea only
    Class A equipment (industrial broadcasting & communication equipment)1
    1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or
    user should take notice of it. This equipment is intended for use in business environments and is not to be
    used in homes.
    • TL75 test leads with two caps
    • 2 AA batteries
    • User’s manual

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE

      Sign up to stay in the know-how of our latest products, updates, special offers, and more.

      • Subscription Form