Fluke II1050/9H/SB140 Acoustic Imager Kit with 9 Hz Thermal Module and SB140 SoundBeacon, 2-100 kHz
Key Features
?
Question about this product?
Features
- 202 digital MEMS microphones and a 13 MP camera locate sound sources from 0.5 m to 120 m across 2 kHz to 100 kHz
- Supplied with a 9 Hz 384 x 288 IR module for Dual Mode: acoustic, thermal and visible images side by side in real time
- Includes the Fluke SB140 SoundBeacon 40 kHz ultrasonic transmitter for seal and airtightness tests on doors, hatches, cabins and vessels
- Beacon mode locates the SoundBeacon signal escaping through gaskets, welds and seals
- LeakQ mode shows leak rate in real time and estimates the cost of compressed air, gas, refrigerant and vacuum leaks
- PDQ mode classifies partial discharge as surface, floating or corona, estimates probability and shows a live PRPD pattern
- MecQ mode picks up bearing wear, gear mesh faults, pump cavitation and loose parts without stopping the machine
- IP54 rated, 2 m drop tested, 1.2 kg with two field-replaceable Li-ion batteries
Technical Information
- Microphones 202 digital MEMS
- Frequency Range 2 kHz to 100 kHz
- Detection Distance 0.5 m to 120 m (depends on environment)
- Acoustic Field of View 64° x 48° (typical)
- Acoustic Frame Rate 25 fps
- Sensitivity -26 dBFS (typical)
- Signal-to-Noise Ratio 73 dBA (typical)
- Visible Camera 13 MP, fixed focus, 3x digital zoom
- Display 7 in sunlight-readable LCD, capacitive touch, 1280 x 800
- File Formats JPG images, MP4 video up to 5 min
- Modes LeakQ, PDQ, MecQ, Beacon, Dual Mode (acoustic + thermal + visible), Ti Mode (thermal + visible)
- Thermal Resolution 384 x 288 (12 µm pixel pitch)
- Thermal Frame Rate 9 Hz
- Thermal Sensitivity (NETD) 45 mK
- Temperature Range -20 °C to 150 °C and 100 °C to 550 °C
- Temperature Accuracy ±2 °C or ±2% of reading, whichever is greater
- Spectral Band 8 µm to 14 µm
- Thermal Field of View 25° x 19°, IFOV 1.14 mrad
- Thermal Focus Manual, 10.5 mm lens
- Thermal Module Connection USB-C
- Thermal Module Size and Weight 60 x 36 x 28 mm, 55 g
- SoundBeacon Frequency 40 kHz ±1.5 kHz (typical)
- SoundBeacon Battery 9 V alkaline, more than 300 hours
- SoundBeacon Protection IP40
- SoundBeacon Weight 175 g (with battery)
- Battery 2 x field-replaceable Li-ion smart batteries, 10.8 V, 3350 mAh
- Battery Life More than 3.5 hours
- Charge Time Less than 3 hours
- Charging USB-C in unit or optional external charging dock
- Connectivity Wi-Fi, Bluetooth, 2 x USB-C
- Tripod Mount 1/4"-20
- Operating Temperature -10 °C to 45 °C
- Storage Temperature -20 °C to 70 °C (without battery)
- Relative Humidity 10% to 95%, non-condensing
- Ingress Protection IP54 (IEC 60529)
- Drop Test 2 m
- Dimensions (H x W x L) 235 x 154 x 46 mm
- Weight 1.2 kg (with battery)
- Safety IEC 61010-1, pollution degree 2
- EMC IEC 61326-1 industrial, CISPR 11 Group 1 Class A
Items Included
- Fluke ii1050 acoustic imager
- IR thermal module (9 Hz)
- Fluke SB140 SoundBeacon with 9 V battery, soft case and 1 in probe
- 2 x rechargeable Li-ion smart batteries
- Adjustable wrist strap and neck strap
- Hard carrying case
- Soft carry bag with shoulder strap
- USB-C cable
- USB-C charger with plug

