• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    FLUKE FP Plus FoodPro Plus Thermometer

    # FP Plus

    • Two-in-one infrared thermometer for foodservice
    • Combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings
    FLUKE
    • FLUKE
    • FP Plus

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?

    The Fluke FoodPro Plus thermometer provides a complete temperature measurement and monitoring solution for foodservice professionals. Use the FoodPro Plus to quickly and accurately measure food product temperatures to help detect potential food safety problems. It combines the same infrared surface temperature scanner as the FoodPro, and adds to it a fold out probe thermometer for measuring internal food temperature, and an integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals. Like the FoodPro, the FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.

    The Fluke FoodPro Plus is useful for:

    • Receiving: Use the FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
    • Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures
    • Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements
    • Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs
    • Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste
    • Measures -35 to +275 °C (-31 to 527 °F) with non-contact thermometer and from -40 to 200ºC (-40 °F to +392 °F)with probe
    • Features backlit display for clear readings in poorly lit areas
    • Displays MAX temperature for quick reference

     

    Key Features
    • Quickly scan temperatures without risk of cross-contamination
    • Verify internal temperatures with flip down, field replaceable, thin-film RTD (Resistant Thermal Device) platinum tipped probe
    • Set adjustable alarms with integrated countdown timer (adjustable from 10 seconds to 7 hours, 59 minutes)
    • Dual-reading display shows the highest scanned temperature alongside the current reading
    • Easy to-see illumination light shows the temperature measurement spot and removes the targeting guesswork
    • HACCP Check “Go/No-Go” lights show immediately if temperatures are within HACCP guidelines for safe hot or cold food holding (A green light indicates safe hot and cold holding temperatures, while potentially dangerous food temperatures trigger a red light)
    • Sealed to IP54 standards for long life expectancy and accuracy
    Infrared Specifications
    Temperature -35°C to 275°C
    Accuracy (Assumes ambient operating temperature of 23°C ±2°)
    Between 0°C and 65°C: ±1°C
    Below 0°C: ±1° ±0.1 degree/degree
    Above 65°C: ±1.5% of reading
    Response time < 500 ms after initial reading
    Spectral response 8-14 microns
    Emissivity Pre-set for foodservice applications
    Distance to spot size/Optical resolution (D:S) 2.5:1 @ 90% energy, typical
    Typical working range (target illumination) ≈ 25 mm to 250 mm
    Minimum target size 12 mm ø
    Illumination to IR channel offset 13 mm
    Probe Specifications
    Temperature -40°C to 150°C
    Accuracy (Assumes ambient operating temperature of 23°C ±2°)
    Between –5°C and 65°C: ±0.5°C
    Below –5°C: ±1°C
    Above 65°C: ±1% of reading
    Response time 7-8 seconds (3 time constants)
    Probe dimensions Diameter: 3.0 mm
    Length: 90 mm
    Sensor type Thin-film platinum, class A, Resistance
    Thermal device (RTD)
    Operational Specifications
    Repeatability Within accuracy specifications of the unit
    Ambient operating range 0°C to 50°C
    Relative humidity 90% (±5%) RH non condensing @ 30°C
    Storage temperature -20°C to 60°C
    Weight 150 g (with battery)
    Dimensions 165 x 32 x 50 mm
    Power, battery life 9 V alkaline
    Battery life Alkaline, 10 hours minimum @ 23°C
    Target illumination High brightness LED
    Display resolution 4 digits, 0.1°C
    Displayhold (7seconds) Yes
    LCD backlit display Yes
    Temperature display 4 digits, 0.1°C resolution
    Maximum temperature displayed Yes
    Timer Yes
    Environmental data IP54 sealing (hand-washable, non-submersible)
    Other Specifications (both)
    Calibration certificate Calibration accuracy with NIST and DKD traceability
    Standards Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
    Certifications CE NSF
    Manufacturer Warranty 2 years
    Options/Accessories Replacement probe
    • 1 – Built-in Contact Probe
    • 1 – 9V Alkaline Battery
    • 1 – Quick Start Guide
    • 1 – Soft Carrying Pouch
    • 1 – User Manual

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE