• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • Create a Requisition

    FLUKE 718Ex 30G Intrinsically Safe Pressure Calibrator (2 bar),-12 to 30 PSI

    # 718Ex 30G

    • Intrinsically Safe Pressure Calibrator -12 to 30 PSI (0.5%FS Accuracy; 0.001 PSI Resolution).
    • ATEX II 1G Ex ia IIC T4 Compliant.
    • Built-in pressure / vacuum hand pump, with fine adjust vernier and bleed valve
    FLUKE
    • FLUKE
    • 718Ex 30G

    Quantity:

    - +
      ADD TO MY TOOLBOX
    Where to buy this product?
    • Fluke 718Ex-30G Pressure Calibrator is a new compact, lightweight and easy to carry calibrator that delivers outstanding performance, durability, reliability and is powerful intrinsically safe, self contained pressure calibrator for usage in Explosion endangered areas. The Fluke 718Ex Calibrator is EMI tolerant, dust and splash resistant and features a removable battery door for quick battery changes.
      The Fluke 718Ex simultaneously measures pressure and mA and delivers 24 volt loop supply while measuring mA. The Fluke 718Ex provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
      This new Pressure Calibrator presents cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures. Connect it with any of the Fluke pressure modules to address a wide variety of gage, differential, absolute, vacuum and dual (compound) pressure applications.
      Measure:
      * Temperature from Thermocouple output
      * Loop Current
      * Pressure, 0.05% of full scale
      * Temperature from RTD output
      * Pressure to 10,000 psi/69 mPa using one of 29 Fluke pressure modules
      * Pressure, 0.05% of full scale with internal 30 psig sensor
    Measurement Accuracy
    Pressure
    Fluke 718Ex 30G
    Range -830 mbar to 2 bar (internal sensor)
    Over pressure: 3x FS
    Resolution 0.0001 bar
    Accuracy 0.05% FS
    Functions Zero, Min, Max, Hold, Damp
    Note: for use with non-corrosive gasses
    Fluke 718Ex 100G
    Range -830 mbar to 7 bar (internal sensor)
    Over pressure: 2x FS
    Resolution 0.001 bar
    Accuracy 0.05% FS
    Functions Zero, Min, Max, Hold, Damp
    Note: for use with non-corrosive gasses
    Fluke 718Ex series
    via pressure module connector
    Range 29 pressure modules, 2.5 mbar to 700 bar
    Over pressure per pressure module specs
    Resolution Per pressure module specs
    Accuracy To 0.025% of full span, per pressure module specs
    Functions Zero, Min, Max, Hold, Damp
    Note: media compatibility per pressure module specs
    Source Pressure, built in pump
    Range -820 mbar to full scale
    Note Supported Pressure Units PSI, in. H2O (4 °C), in. H2O (20 °C), kPa, cm H2O (4 °C),
    cm H2O (20 °C), bar, mbar, kg/cm2, mmHg, in Hg

    Technical Data
    Measure Accuracy
    Range 0-24 mA
    Resolution 0.001 mA
    Accuracy 0.02% rdg ± 2 counts
    Display
    LCD, 5 digit pressure and current simultaneous

    Environmental Specifications
    Operating temperature
    -10°C to 55°C
    Storage temperature
    -40°C to 60°C
    Humidity (Without Condensation)
    95% (10°C to 30°C)
    75% (30°C to 40°C)
    45% (40°C to 50°C)
    35% (50°C to 55°C)
    Operating Altitude
    3,000 m max

    Safety Specifications
    Safety
    ATEX II  1G EEx ia IIC T4 compliant
    CSA Certification I.S. Class I,
    Div 1 Groups A-D , T4

    Mechanical & General Specifications
    Size
    216 mm L x 94 mm W x 66 mm H (with holster)
    Weight
    Approx. 992 g (with holster)
    Warranty
    1 year
    Shock
    1 meter drop test
    Vibration
    Random, 2 G, 5-500 Hz
    Battery type
    One 9-volt alkaline battery ANSI/NEDA 1604A or IEC 6LR619V
    Battery life: 4 to 20 hours, depending on functions used
    • 1 – Test Lead Set (TL75)
    • 1 – Test Clip Set (AC72)
    • 1 – Protective Red Holster
    • 1 – 718Ex CCD Control Drawing
    • 1 – User Manual

    Explore More in Intrinsically Safe Tools

    Provide us your contact detailsone of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







    *Demonstrations can only be scheduled within the UAE