• Store Locator
  • Schedule a
    Demo
  • Add products to your Toolbox to save it for requesting a quote while you keep browsing for other products to complete your list.

    My
    Toolbox
  • DeWALT D24000S-QS - Slide Table Wet Tile Saw & Leg Stand 220V
      DeWALT - Slide Table Wet Tile Saw & Leg Stand 220V Model # D24000S-QS

     
    • Stainless steel rail system is intergrated into the tile saw frame; ensuring accurate cuts
    • Cantilevering rail / cart system allows for 610 mm ripping capacity
    • Low weight allows one person to transport and set up saw
    DeWALT DCD240X2-GB - 54V XR Flex Volt Dual Handle Mixer – 9Ah, 220V
      DeWALT - 54V XR Flex Volt Dual Handle Mixer – 9Ah, 220V Model # DCD240X2-GB

     
    • 5 electronic speed setting dial (1 = 300 RPM; 2 = 450 RPM; 3 = 550 RPM; 4 = 650 RPM; 5 = 725 RPM)
    • Dual handle ergonomic with critical width and angle dimensions; reduces user fatigue
    • M14 threaded connector which is a standard fitment
    HUSQVARNA 587905901 - Segmented Marble & Granite Diamond Blade, 400 x 25.4 mm, VARI-CUT S35 Turbo 400, Silver
      HUSQVARNA - Segmented Marble & Granite Diamond Blade, 400 x 25.4 mm, VARI-CUT S35 Turbo 400, Silver Model # 587905901

     
    • High-quality finishing of the cut
    • High speed in hard materials
    • High speed in universal construction materials
    • Ideal for concrete and hard materials
    DeWALT DT4950-QZ - Mixer Tools; 100mm X 600mm
      DeWALT - Mixer Tools; 100mm X 600mm Model # DT4950-QZ

     

    For wallpaper paste; gloss paint; emulsion; mortar and plaster.

    DeWALT DT4951-QZ - Mixer Tools; 120mm X 600mm
      DeWALT - Mixer Tools; 120mm X 600mm Model # DT4951-QZ

     

    For wallpaper paste; gloss paint; emulsion; mortar and plaster.

    DeWALT DT3733-XJ - Ceramic Tile Cutting Blade D250XB25.4XH8
    DeWALT DWC410-QS - Tile Cutter 110mm 220V
      DeWALT - Tile Cutter 110mm 220V Model # DWC410-QS

     
    • 1270 W Tile saw for cutting Marble Granite and other porcelain stones
    • Target application are mainly for floor work; can be used with wet kit for wet operation to ensure longer life of the cutting blade
    • No Bevel function
    DeWALT DX3012 - Marble 306 x 48 x 10mm
    DeWALT DX3014 - Marble 354 x 48 x 10mm
    DeWALT DX3101 - Diamond Tile Blade 100 x 16mm
    DeWALT DX3121 - Diamond Tile Blade 115 x 22mm
    DeWALT DX3214 - Granite 356 x 40 x 10mm
    DeWALT DX3821 - Marble & Granite 115 x 22.2mm
    DeWALT DX3901 - Rim Blade Marble & Granite 100 x 20mm
    GROZ PMX/80 - Paint Mixer 80mm X 400mm Length 1Pc
      GROZ - Paint Mixer 80mm X 400mm Length 1Pc Model # PMX/80

     
    • Continue to gently work on the material till it is of desired
      consistency
    • The mixer works best with a variable speed reversible drill machine with 400 – 600 watts minimum power.
    • The mixer works best with a variable speed
      reversible drill machine with 400 – 600 watts minimum power.
    DeWALT DX3801 - Marble & Granite 100 x 20mm
    DeWALT DX3861 - Marble & Granite 180 x 22.2mm
    DeWALT DX3881 - Marble & Granite 230 x 22.2mm
    DeWALT DX3921 - Rim Blade Marble & Granite 115 x 22.2mm
    DeWALT DX3961 - Rim Blade Marble & Granite 180 x 22.2mm
    DeWALT DX3981 - Rim Blade Marble & Granite 230 x 22.2mm
    GAZELLE ELP115 - Electroplated Blade 115mm 4.5in
    GAZELLE ELP180 - Electroplated Blade 180mm 7in
    GAZELLE ELP100 - Electroplated Blade 100mm 4in
    DeWALT DWD241-LX - Dual Handle Paddle Mixer 110v
      DeWALT - Dual Handle Paddle Mixer 110v Model # DWD241-LX

     
    • Powerful motor handles thicker, more viscous materials
    • 3-speed dial for optimized control and performance
    • Variable speed trigger for additional control
    DeWALT DWD241-GB - Dual Handle Paddle Mixer 220v
      DeWALT - Dual Handle Paddle Mixer 220v Model # DWD241-GB

     
    • Powerful motor handles thicker, more viscous materials
    • 3-speed dial for optimized control and performance
    • Variable speed trigger for additional control
    Rubi 18926 - TS-66-Max Manual Tile Cutter – without Case, 66cm Cutting Length
      Rubi - TS-66-Max Manual Tile Cutter – without Case, 66cm Cutting Length Model # 18926

     
    • For intensive cutting of ceramic tiles.
    • 800kg high performance single point breaker.
    • Double guide for better visibility of the scoring and cutting line.
    • Chromed steel guides, calibrated and rectified, with anti-corrosion treatment.
    Rubi 18922 - TS-66-Max Manual Tile Cutter with Carry Case, 66cm Cutting Length
      Rubi - TS-66-Max Manual Tile Cutter with Carry Case, 66cm Cutting Length Model # 18922

     
    • For intensive cutting of ceramic tiles.
    • Transport case, with reinforced closures and hinges.
    • 800kg high performance single point breaker.
    • Double guide for better visibility of the scoring and cutting line.
    Rubi 17905 - TR-600-Magnet Manual Tile Cutter for Ceramic and Porcelain Tiles, with Carry Case
      Rubi - TR-600-Magnet Manual Tile Cutter for Ceramic and Porcelain Tiles, with Carry Case Model # 17905

     
    • Fast operating system by magnet, operable with one hand. Greater ease and speed of cutting.
    • Reinforced construction elements. High breaking power.
    • Swivel square with central pivot for fast and accurate measurement of angular cuts.
    Rubi 17953 - TZ-1300 Manual Tile Cutter for Ceramic and Porcelain tiles, with Carry Bag
      Rubi - TZ-1300 Manual Tile Cutter for Ceramic and Porcelain tiles, with Carry Bag Model # 17953

     
    • Smoother and more precise head movement.
    • Large cutting capacity, up to 21 mm thickness. Ideal for large formats.
    • Robust and folding structure for added strength and ease in transport.
    Rubi 17954 - Manual Tile Cutter Cut: 155cm, TZ-1550
      Rubi - Manual Tile Cutter Cut: 155cm, TZ-1550 Model # 17954

     
    • Maximum power from the most advanced tile cutter on the market.
    • Incredibly powerful breaker (up to 1500 kg), operable with one hand.
    • Smoother and more precise head movement.
    Rubi 17915 - Manual Tile Cutter Cut: 102cm, TX-1020 MAX
      Rubi - Manual Tile Cutter Cut: 102cm, TX-1020 MAX Model # 17915

     
    • Breaker’s lock and unlocking system by trigger increases performance with both thick and thin materials.
    • Great efficiency of the entire system.
    • 1200 kg power breaker for cutting the hardest materials.
    Rubi 17921 - Manual Tile Cutter Cut: 125cm, TX-1250 MAX
      Rubi - Manual Tile Cutter Cut: 125cm, TX-1250 MAX Model # 17921

     
    • The professional manual cutters from the TX-MAX series are perfect for INTENSIVE cutting of all types of ceramic tiles.
    • Powerful mobile crusher and front stop with central pivot axis, results simple and fast execution of corner cuts in porcelain tiles.
    • TX-MAX manual cutters can handle stoneware, thanks to the high breaking force.
    Rubi 17952 - Manual Tile Cutter 85cm, TZ-850
      Rubi - Manual Tile Cutter 85cm, TZ-850 Model # 17952

     
    • Maximum power from the most advanced tile cutter on the market.
    • Incredibly powerful breaker (up to 1500 kg), operable with one hand.
    • Smoother and more precise head movement.
    Rubi 17951 - Manual Tile Cutter 102cm, TZ-1020
      Rubi - Manual Tile Cutter 102cm, TZ-1020 Model # 17951

     
    • Maximum power from the most advanced tile cutter on the market.
    • Incredibly powerful breaker (up to 1500 kg), operable with one hand.
    • Smoother and more precise head movement.
    Rubi 14908 - TQ-75 Manual Tile Cutter, for Porcelain and Glazed Stoneware Tiles
      Rubi - TQ-75 Manual Tile Cutter, for Porcelain and Glazed Stoneware Tiles Model # 14908

     
    • Mono-guide head with 6 radial bearings for a smoother and more precise operation
    • Patented self-adjusting bearing system does not require any adjustment by the user
    • Ideal for professional cutting of porcelain stoneware (AIa/BIa) and intensive tile (BIII) and enameled stoneware (BIIa)
    Rubi 14909 - TQ-102 Manual Tile Cutter, for Porcelain and Glazed Stoneware Tiles
      Rubi - TQ-102 Manual Tile Cutter, for Porcelain and Glazed Stoneware Tiles Model # 14909

     
    • Mono-guide head with 6 radial bearings for a smoother and more precise operation
    • Patented self-adjusting bearing system does not require any adjustment by the user
    • Ideal for professional cutting of porcelain stoneware (AIa/BIa) and intensive tile (BIII) and enameled stoneware (BIIa)
    Rubi 1945 - Carbide Scoring Wheel 1/4″ (6 mm.)
      Rubi - Carbide Scoring Wheel 1/4″ (6 mm.) Model # 1945

     

    Tungsten Carbide scoring wheel of high resistance and duration.

    • For Wall tiles.
    • Patented model with new high technology RUBI alloy.
    • Maximum precision and resistant to wear.

     

    Rubi 1946 - Carbide Scoring Wheel 7/16″ (10 mm.)
      Rubi - Carbide Scoring Wheel 7/16″ (10 mm.) Model # 1946

     
    • Spare wheel for TS, TR, Speed, Star, TF, Pocket, Rapid, Practic series tile cutters
    • Tungsten carbide scoring wheels.
    • Patented model with new high-tech RUBI alloy; maximum precision and wear resistance.
    Rubi 1958 - Carbide Scoring Wheel 3/8″ (8 mm.)
      Rubi - Carbide Scoring Wheel 3/8″ (8 mm.) Model # 1958

     
    • Tungsten widia
    • Lasts longer than steel
    • Premium clean score
    Rubi 1959 - Plus Silver Carbide Scoring Wheel 3/8″ (8 mm.)
      Rubi - Plus Silver Carbide Scoring Wheel 3/8″ (8 mm.) Model # 1959

     
    • For TX Rubi tile cutters
    • Manufactured in highly resistant and durable tungsten carbide
    • For porcelain, wall and floor tiles
    Rubi 1900 - Plus Extreme Carbide Scoring Wheel 7/8″ (22mm)
      Rubi - Plus Extreme Carbide Scoring Wheel 7/8″ (22mm) Model # 1900

     
    • Titanium-coated tungsten carbide cutting wheel for extra-long life
    • Suitable for use on all surfaces
    • For optimal cuts on hard ceramics with rough or structured surfaces
    Rubi 1901 - Plus Extreme Scoring Wheel 7/8″ (22mm)
      Rubi - Plus Extreme Scoring Wheel 7/8″ (22mm) Model # 1901

     
    • Ball nearing mounted providing a soft scratch
    • Made of Tungsten carbide with a superficial Titanium treatment
    • Suitable for all surfaces for sharp scoring in hard ceramics with rough or structured surfaces
    Rubi 1906 - Endure Scoring Wheel 3/8″ (8mm)
      Rubi - Endure Scoring Wheel 3/8″ (8mm) Model # 1906

     
    • 8 mm scoring wheel for TR, TS and TF, Speed, Star and Fast Tile Cutters
    • Made of high-quality tungsten carbide
    • Excellent for cuts in ceramic tiles with a high cutting difficulty, especially with rough or structured surface finishes
    Rubi 1950 - Carbide Scoring Wheel 13/16″ (18 mm.)
      Rubi - Carbide Scoring Wheel 13/16″ (18 mm.) Model # 1950

     
    • Rubi 3/4 in. scoring wheel includes a roller guide made of tungsten carbide highly resistant to wear
    • The 3/4 in. scoring wheel by Rubi allows for cuts without chipping the enamel or deviations
    • For rough or difficult-to-cut ceramics
    Rubi 1964 - Scoring Wheel Gold 7/8″ (22 mm.)
      Rubi - Scoring Wheel Gold 7/8″ (22 mm.) Model # 1964

     
    • Cutting wheel Ø 22 mm. GOLD Especially for cutting hard ceramics.
    • Wheels made of Tungsten Carbide and treated by titanium.
    • Cutting wheel with a surface treatment of titanium.
    Rubi 1907 - Scoring Wheel Extreme 7/8″ (22 mm.)
      Rubi - Scoring Wheel Extreme 7/8″ (22 mm.) Model # 1907

     
    • 22 mm scoring wheel for TR, TS and TF, Speed, Star and Fast Tile Cutters
    • Ball bearing mounted providing a soft scratch and a life of 300%, compared to SILVER scoring wheels
    • Made of Tungsten carbide with a superficial Titanium treatment
    Rubi 1903 - Plus Scoring Wheel Endure 3/8″ (8 mm.)
      Rubi - Plus Scoring Wheel Endure 3/8″ (8 mm.) Model # 1903

     
    • RUBI ENDURE scoring wheels are made of high-quality tungsten carbide.
    • Its unitary grinding guarantees an exact and precise incision angle in all units.
    Rubi 51902 - Circular Cutter Kit 320cm, TC-125
      Rubi - Circular Cutter Kit 320cm, TC-125 Model # 51902

     
    • PRECISE cutting thanks to the SLIM SYSTEM guide system.
    • Equipped with a carbon steel plate on adjustable stainless steel radial bearings.
    • Double dust reduction system: suction or wet system.
    Rubi 51959 - Circular Saw 115-125mm, TC-125
      Rubi - Circular Saw 115-125mm, TC-125 Model # 51959

     
    • Accurate cut thanks to the Slim System guides. Equipped with a carbon steel slide on adjustable stainless steel radial bearings.
    • Double dust reduction system: suction or wet system.
    • Height-adjustable cutting head (plunge effect), hinged from 0° to 45°. (mitre). Fast adjustment system.
    Rubi 26962 - HIT-1200-N Manual Tile Cutter with Carry Bag, 75cm Cutting Length
      Rubi - HIT-1200-N Manual Tile Cutter with Carry Bag, 75cm Cutting Length Model # 26962

     
    • Rubi HIT 1200 N hand tile cutter for fast, repetitive cutting of all commercially available ceramic tiles.
    • Magnetic system ensures one-handed use.
    • Chrome, solid, corrosion-resistant rails with a diameter of 20 mm.
    Rubi 26961 - Tile Cutter Without Bag Cut: 120cm, HIT-1200 N
      Rubi - Tile Cutter Without Bag Cut: 120cm, HIT-1200 N Model # 26961

     
    • 800 KG HIGH BREAKING FORCE for cutting all kinds of ceramic and vitrified tiles up to 1200 MM / 120 CM / 4 Feet / 48 Inches
    • CHROMED & RECTIFIED SOLID Ø 20MM Guides made of Steel with Anti Corrosion Treatment. NEW MAGNET System enables one handed use and great visibility during scoring.
    • NEW BEARING SYSTEM for the extremely smooth movement resulting in accurate and precise cuts
    Rubi 18911 - Slim System Tile Cutter Cut: 320cm
      Rubi - Slim System Tile Cutter Cut: 320cm Model # 18911

     
    • Facilitates a straight cut without deviations.
    • Offers high quality performance.
    • Progressive separation of the material, reducing the risk of breakage.
    Rubi 18910 - Slim System Easy Transporter 320cm Max Load: 60kg with 10 Suction Pads
      Rubi - Slim System Easy Transporter 320cm Max Load: 60kg with 10 Suction Pads Model # 18910

     
    • Ideal system to transport of large porcelain sheets formats
    • Works well in conjunction with the Rubi Skim Cutter
    • Includes two retractable and adjustable guides 160 to 320 cm. and 10 suction clamping suction cups
    Rubi 18913 - Slim System Cutter Guide 1100mm
      Rubi - Slim System Cutter Guide 1100mm Model # 18913

     
    • Additional Slim Cutter Guide for large format tile
    • Extend the cutting capacity by 43 inch
    Rubi 18917 - Slim Breaker
      Rubi - Slim Breaker Model # 18917

     
    • Auxiliary breaker for the cut of slim porcelain slabs or large tiles.
    • To separate thicknesses of 8 mm or more.
    • Soft-grip handle for a better comfort and ergonomic.
    Rubi 18819 - Slim Easy Trans Supplementary Guide Set
      Rubi - Slim Easy Trans Supplementary Guide Set Model # 18819

     
    • Works with the Rubi SLIM EASYTRANS Transport Kit to increase the lifting capacity by up to 154 lbs. (70 kg.)
    • Each crossbar incorporates a supplementary suction cup to increase maximum load
    • Adjustable in both width and length, giving the conveyor SLIM EASYTRANS a rigidity in any format and form of the piece of ceramic sheet
    Rubi 18936 - Slab Trans Heavy Duty retractable from 165-320cm
      Rubi - Slab Trans Heavy Duty retractable from 165-320cm Model # 18936

     
    • Conveyor / frame for the handling of ceramic sheet
    • Weight capacity: 310 lb. (140 kg.)
    • Works well with Rubi SLIM Cutter and TC-125 cutting systems
    Rubi 18934 - Slab Trolley Max load: 140kg 360x160cm
      Rubi - Slab Trolley Max load: 140kg 360x160cm Model # 18934

     
    • Transport system for large format tiles, porcelain panels and light slabs
    • Can act as a support when back-buttering thin porcelain tile panels
    • Load capacity: 308 lb. (140 kg.) – includes material and conveyor
    Rubi 18935 - Slab Table, 250 kg
      Rubi - Slab Table, 250 kg Model # 18935

     
    • Workbench for cutting and handling large-format ceramic sheets using the tools of the SLAB SYSTEM range.
    • The extra reinforced aluminum bars give the SLAB TABLE a high rigidity and great stability. Giving it a maximum load capacity of up to 250 kg.
    • The spacing of its 5 bars, made of aluminum, allows the user to drill and cut without fear of damaging the table itself.
    Rubi 66900 - Double Suction Cup
      Rubi - Double Suction Cup Model # 66900

     
    • Body made of highly resistant aluminum. With ergonomic handle for greater comfort
    • Maximum load capacity : 176.37 lb. (80 kg)
    • All RUBI suction cups have been subjected to constant quality tests to ensure and guarantee proper resistance during use
    Rubi 18919 - Suction Cup with Vacuum Pump
      Rubi - Suction Cup with Vacuum Pump Model # 18919

     
    • Manual vacuum pump is easily activated with a single finger
    • Equipped with a safety mark that indicates loss of suction and reminds the user to pump again to retain the vacuum load in the suction cup
    • Manual pressure release valve to easily remove the suction cup from the material
    Rubi 66904 - Triple Suction Cup
      Rubi - Triple Suction Cup Model # 66904

     
    • Body made of highly resistant aluminum. With ergonomic handle for greater comfort
    • Maximum load capacity of 220.46 lbs (100 kg)
    • All RUBI suction cups have been subjected to constant quality tests to ensure and guarantee proper resistance during use
    Rubi 66929 - Rough Surfaces Suction Cup
      Rubi - Rough Surfaces Suction Cup Model # 66929

     
    • Single suction cup for handling ceramic tiles with rough or slightly structured surfaces
    • Lightweight polycarbonate body
    • Reinforced lever base for greater tensile strength
    Rubi 66952 - Rough Surfaces Double Suction Cup
      Rubi - Rough Surfaces Double Suction Cup Model # 66952

     
    • Suction cup for the manipulation of ceramic tiles with rough or slightly structured surfaces
    • Metal reinforcement in lever base for greater resistance to traction
    • Injected aluminum body
    Rubi 26965 - 18V Cordless Electric Paddle Mixer Brushless Motor 50-60Hz , Rubimix E-10 Energy
      Rubi - 18V Cordless Electric Paddle Mixer Brushless Motor 50-60Hz , Rubimix E-10 Energy Model # 26965

     
    • BRUSHLESS engine. It does not need maintenance and increases the life of the product.
    • Brushless motor with 360W Power. Maintenance-free and increases the product’s lifespan.
    • Progressive switch (RPM control). Switch safety lock. Prevents unintentional start-up.
    Rubi 26966 - 18V 5AH Energy Battery
      Rubi - 18V 5AH Energy Battery Model # 26966

     
    • LED indicator of battery charge level.
    • 18 V to 5 Ah Li – ion battery
    • To be used with Rubimix E-10 Energy Mixer from Rubi
    Rubi 25944 - Electric Mixer with Paddle 220V 1200W 50/60HZ, Rubimix-9 N
      Rubi - Electric Mixer with Paddle 220V 1200W 50/60HZ, Rubimix-9 N Model # 25944

     
    • With new and improved handle, superior comfort and stability.
    • 2 speed gearbox (0-620 RPM & 0-810 RPM) and progressive switch optimises material mixing
    • Interchangeable mixing paddles with M14 connection – greater versatility
    Rubi 25942 - Electric Mixer with Paddle 110V, Rubimix-9 N
      Rubi - Electric Mixer with Paddle 110V, Rubimix-9 N Model # 25942

     
    • Powerful 1200 Watt Motor.
    • 2 Speed Gearbox: 0-620 & 0-180 RPM
    • M14 Direct Connect Tread Fitting.
    Rubi 25943 - Electric Mixer 210/240V 50/60HZ, Rubimix-9 Duplex
      Rubi - Electric Mixer 210/240V 50/60HZ, Rubimix-9 Duplex Model # 25943

     
    • Dual bi-material grip handle. Improved ergonomics and comfort.
    • Electronic control to optimize mixing.
    • Double mixing paddle to increase work performance.
    Rubi 26922 - Electric Mixer 1800W 230V 50/60HZ, Rubimix-9 N Plus
      Rubi - Electric Mixer 1800W 230V 50/60HZ, Rubimix-9 N Plus Model # 26922

     

    This product has been discontinued by the manufacturer.

    • Quick and easy to change the brushes. High comfort.
    • Powerful 1800W motor for greater mixing capacity and high reliability.
    • New and improved handle. Comfort and stability.
    Rubi 60202 - Rubber Buckets
      Rubi - Rubber Buckets Model # 60202

     
    • 14.5 Gals (65 liters) capacity
    • Hard plastic bucket designed for mixing any material with any mixer
    Rubi 45915 - ND-200 220V Portable Electric Tile Cutter
      Rubi - ND-200 220V Portable Electric Tile Cutter Model # 45915

     
    • Lightweight and compact, ideal for working in small spaces.
    • Stainless steel folding table for more durability.
    • Fast positioning system at 45° for improved ease of use.
    Rubi 52905 - DX-350-N-1000 220V Electric Tile Cutter
      Rubi - DX-350-N-1000 220V Electric Tile Cutter Model # 52905

     
    • Motor assembly mounted on sliding bearings for maximum precision and reliability.
    • Aluminium structure for a lightweight machine with maximum resistance to working conditions.
    • High performance plunge effect for maximum cutting height.
    Rubi 52915 - DX-350-N-1300 220V Electric Tile Cutter
      Rubi - DX-350-N-1300 220V Electric Tile Cutter Model # 52915

     
    • Motor assembly mounted on sliding bearings for maximum precision and reliability. Perfect finishes.
    • Aluminium structure. Lighter cutter with maximum resistance to working conditions.
    • High performance plunge effect. Maximum cutting height.
    Rubi 52900 - Laser & Level Electric Cutter  230V 50HZ, DX-250 PLUS 1000
      Rubi - Laser & Level Electric Cutter 230V 50HZ, DX-250 PLUS 1000 Model # 52900

     

    This product has been discontinued by the manufacturer.

    • Equipped with protective head for safety in the use of segmented blades.
    • High performance plunge effect. Maximum cutting height.
    • Motor assembly mounted on sliding bearings for maximum precision and reliability. Perfect finishes.
    Rubi 52910 - Laser & Level Electric Cutter 230V 50HZ, DX-250 PLUS 1400
      Rubi - Laser & Level Electric Cutter 230V 50HZ, DX-250 PLUS 1400 Model # 52910

     

    This product has been discontinued by the manufacturer.

    • Machine with movable cutting head for total versatility .
    • For all types of ceramic tiles and construction materials such as marble, granite, briquettes and refractory bricks.
    • Aluminum structure. Lighter and maximum resistance during transport conditions.
    Rubi 55941 - DC-250-1200 220V Electric Tile Cutter
      Rubi - DC-250-1200 220V Electric Tile Cutter Model # 55941

     
    • Head height adjustment allowing to adjust the cutting height.
    • Extruded aluminium tables, removable for an easy cleaning of the machine.
    • Folding legs with built-in wheels for easy carrying.
    Rubi 54975 - DU-200-Evo-850 220V Electric Tile Cutter
      Rubi - DU-200-Evo-850 220V Electric Tile Cutter Model # 54975

     
    • Built-in foldable legs for quick installation
    • With wheels and handle for easy transport and handling
    • Bi-material handle for improved ergonomics
    Rubi 51914 - Roller Table Extension for DU/DC/DCX/DS/DX
      Rubi - Roller Table Extension for DU/DC/DCX/DS/DX Model # 51914

     
    • Increases work surface for large format tiles
    • Features rollers to simplify movement of the tiles
    • Fits to DU/DC/DCX/DS/DX series tile cutters
    Rubi 54993 - Side Table Extesion for DV/DC/DCX
      Rubi - Side Table Extesion for DV/DC/DCX Model # 54993

     
    • Increases work surface for large format tiles
    • Fits to DV/DC/DCX series tile cutters
    Rubi 54994 - 120cm Longitudinal Side Stop For DV-200-1000
      Rubi - 120cm Longitudinal Side Stop For DV-200-1000 Model # 54994

     
    • Ideal for longitudinal locking of large format pieces
    • Maximum side-locking range of 41 cm
    • For DV-200-1000 tile cutter only.
    Rubi 54822 - Lateral Stop DC/DCX/DS/DX
      Rubi - Lateral Stop DC/DCX/DS/DX Model # 54822

     
    • Facilitates positioning of the tile, while reducing the percentage of errors.
    • Fits DC/DCX/DS/DX series tile cutters
    • Works with DW-250-NL (up to 2012)
    Rubi 51916 - Tile Fixer for DV/DC/DS/DX
      Rubi - Tile Fixer for DV/DC/DS/DX Model # 51916

     
    • Fixes tiles during cutting to reduce sudden movements
    • For fixing of the ceramic and perfect cutting measure along its length
    • Fits DV/DC/DS/DX series tile cutters
    GAZELLE GMG100 - Marble/Granite Cutting Blades 100mm
      GAZELLE - Marble/Granite Cutting Blades 100mm Model # GMG100

     
    • Diamond blade for cutting marble and granite
    GAZELLE GMG115 - Marble/Granite Cutting Blades 115mm
      GAZELLE - Marble/Granite Cutting Blades 115mm Model # GMG115

     
    • Diamond blade for cutting marble and granite
    GAZELLE GMG180 - Marble/Granite Cutting Blades 180mm
      GAZELLE - Marble/Granite Cutting Blades 180mm Model # GMG180

     
    • Diamond blade for cutting marble and granite
    GAZELLE GMG230 - Marble/Granite Cutting Blades 230mm
    GAZELLE GMG300 - Marble/Granite Cutting Blades 300mm
    GAZELLE GMG350 - Marble/Granite Cutting Blades 350mm
    GAZELLE GMG400 - Marble/Granite Cutting Blades 400mm
    GAZELLE GRT100 - Tile Cutting Blades 100mm
      GAZELLE - Tile Cutting Blades 100mm Model # GRT100

     
    • These diamond blades have been specifically designed for cutting ceramic and stone tiles.
    • The continuous rim is designed to achieve a smooth and fine edge.
    GAZELLE GRT115 - Tile Cutting Blades 115mm
      GAZELLE - Tile Cutting Blades 115mm Model # GRT115

     
    • These diamond blades have been specifically designed for cutting ceramic and stone tiles.
    • The continuous rim is designed to achieve a smooth and fine edge.
    GAZELLE GRT180 - Tile Cutting Blades 180mm
      GAZELLE - Tile Cutting Blades 180mm Model # GRT180

     
    • These diamond blades have been specifically designed for cutting ceramic and stone tiles.
    • The continuous rim is designed to achieve a smooth and fine edge.
    GAZELLE GRT230 - Tile Cutting Blades 230mm
      GAZELLE - Tile Cutting Blades 230mm Model # GRT230

     
    • These diamond blades have been specifically designed for cutting ceramic and stone tiles.
    • The continuous rim is designed to achieve a smooth and fine edge.
    GAZELLE GXT100 - Tile Cutting Blades 100mm 4in Thin blade
    GAZELLE GXT115 - Tile Cutting Blades 115mm 4.5in Thin blade
    Rubi 05973 - Ceramic Block for the cleaning of diamond blades
      Rubi - Ceramic Block for the cleaning of diamond blades Model # 05973

     
    • 3″ x 1″ thick
    • Designed to sharpen and reactivate diamond blades, as they may have been glazed over by cutting super hard porcelain
    • Diamond Blades must be used with diamonds exposed properly through frequent dressing
    Rubi 05974 - Ceramic Block-N for diamond blades
      Rubi - Ceramic Block-N for diamond blades Model # 05974

     
    • Specifically designed to bring diamonds to the edge of diamond blades when cutting porcelain.
    • It is recommended to use the cleaning block periodically (every few short) to keep the diamond blade in perfect working order.
    Rubi 56916 - Water Pump 230v 50Hz, F-180
      Rubi - Water Pump 230v 50Hz, F-180 Model # 56916

     
    • Rubi Replacement Water Pump for DW & DU Wet Saws. (NOT the NL Models)
    • 240 Volt.
    Rubi 25910 - Ceramic Tiles Continuous Rim Diamond Blade 115mm, CSV-115 PRO
      Rubi - Ceramic Tiles Continuous Rim Diamond Blade 115mm, CSV-115 PRO Model # 25910

     
    • Diamond blade
    • Replacement for tile cutters
    • Continuous rim
    Rubi 31915 - Ceramic Tiles Continuous Rim Diamond Blade 125mm, CSV-125 PRO
      Rubi - Ceramic Tiles Continuous Rim Diamond Blade 125mm, CSV-125 PRO Model # 31915

     
    • Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain
    • Best finish for ceramic tiles and other stone coating materials less than 1″ (25 mm) thick
    • Only for straight cuts, not suitable for mitering with angle grinder
    Rubi 30986 - Turbo Viper Diamond Blade 115mm, TVR-115 SUPERPRO
      Rubi - Turbo Viper Diamond Blade 115mm, TVR-115 SUPERPRO Model # 30986

     
    • Recommended blade to cut hard materials such as granite, rustic tiles, clinker, quartzite, slate and porcelain tiles
    • Robust and reinforced blade
    • Can withstand high tensile forces at blade edges
    Rubi 31964 - Electroplated Cutting and Grinding Diamond Blade 115mm, ECD-115 2IN1 SUPERPRO
      Rubi - Electroplated Cutting and Grinding Diamond Blade 115mm, ECD-115 2IN1 SUPERPRO Model # 31964

     
    • For cutting and grinding natural stone, all kind of ceramic tiles and synthetic materials
    • For adjustment cuts and grinding on all types of porcelain and hard materials
    • For cutting materials greater than 3/4″ (20 mm) thickness
    Rubi 32932 - Porcelain Tiles Diamond Blade 115mm, CPJ-115 SUPERPRO
      Rubi - Porcelain Tiles Diamond Blade 115mm, CPJ-115 SUPERPRO Model # 32932

     
    • For cutting hard porcelain tiles with best performance
    • Specially designed for high speed straight cuts
    • Not suitable for mitre cutting
    Rubi 32933 - Porcelain Tiles Diamond Blade 125mm, CPJ-125 SUPERPRO
      Rubi - Porcelain Tiles Diamond Blade 125mm, CPJ-125 SUPERPRO Model # 32933

     
    • For cutting hard porcelain tiles with best performance
    • Specially designed for high speed straight cuts
    • J-Slots on the rim increase cutting speed on hard porcelain tiles, while reducing the stresses generated throughout the cut
    Rubi 05988 - FORAGRES – 1/4 In. Diamond Tile Drill Bit (6mm) – for Ceramic, Porcelain Tiles, Marble and Granite
      Rubi - FORAGRES – 1/4 In. Diamond Tile Drill Bit (6mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05988

     
    • For dry drilling in ceramic, porcelain, natural stone and other materials.
    • Maximum operating speed 14,000 rpms
    • Usable with grinder
    Rubi 05989 - FORAGRES – 5/16 In. Diamond Tile Drill Bit (8mm) – for Ceramic, Porcelain Tiles, Marble and Granite
      Rubi - FORAGRES – 5/16 In. Diamond Tile Drill Bit (8mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05989

     
    • For dry drilling in ceramic, porcelain, natural stone and other materials.
    • Maximum operating speed 14,000 rpms
    • Usable with grinder
    Rubi 05990 - FORAGRES – 3/8 In. Diamond Tile Drill Bit (10mm) – for Ceramic, Porcelain Tiles, Marble and Granite
      Rubi - FORAGRES – 3/8 In. Diamond Tile Drill Bit (10mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05990

     
    • For dry drilling in ceramic, porcelain, natural stone and other materials.
    • Maximum operating speed 14,000 rpms
    • Usable with grinder
    Rubi 05991 - FORAGRES – 1/2 In. Diamond Tile Drill Bit (12mm) – for Ceramic, Porcelain Tiles, Marble and Granite
      Rubi - FORAGRES – 1/2 In. Diamond Tile Drill Bit (12mm) – for Ceramic, Porcelain Tiles, Marble and Granite Model # 05991

     
    • For dry drilling in ceramic, porcelain, natural stone and other materials.
    • Maximum operating speed 14,000 rpms
    • Usable with grinder
    Rubi 04910 - Dry Cutting Diamond Drill Bit 3/4″ 20MM M14
      Rubi - Dry Cutting Diamond Drill Bit 3/4″ 20MM M14 Model # 04910

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 04911 - Dry Cutting Diamond Drill Bit 1 1/8 28MM M14
      Rubi - Dry Cutting Diamond Drill Bit 1 1/8 28MM M14 Model # 04911

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 04912 - Dry Cutting Diamond Drill Bit 1 3/8″ 35MM M14
      Rubi - Dry Cutting Diamond Drill Bit 1 3/8″ 35MM M14 Model # 04912

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 04913 - Dry Cutting Diamond Drill Bit 1 3/4″ 43MM M14
      Rubi - Dry Cutting Diamond Drill Bit 1 3/4″ 43MM M14 Model # 04913

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 04914 - Dry Cutting Diamond Drill Bit 2″ 50MM M14
      Rubi - Dry Cutting Diamond Drill Bit 2″ 50MM M14 Model # 04914

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 04915 - Dry Cutting Diamond Drill Bit 2 3/8″ 60MM M14
      Rubi - Dry Cutting Diamond Drill Bit 2 3/8″ 60MM M14 Model # 04915

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 05992 - Dry Cutting Diamond Drill Bit 3″ 75MM M14
      Rubi - Dry Cutting Diamond Drill Bit 3″ 75MM M14 Model # 05992

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 05923 - Drygres Drill Bits 4Drill 6MM
      Rubi - Drygres Drill Bits 4Drill 6MM Model # 05923

     
    • The drilling depth of the DRYGRES 4DRILL is 36 mm for the diameters 6, 8 and 10 mm, and 40 mm for the diameters 12, 14 and 20 mm.
    • All DRYGRES 4DRILL burs have a wax inside.
    • The wax melts with the use of the drill bit and improves cooling and removal of drilling debris.
    Rubi 05924 - Drygres Drill Bits 4Drill 8MM
      Rubi - Drygres Drill Bits 4Drill 8MM Model # 05924

     
    • The DRYGRES 4DRILL diamond drill range is recommended for drilling all kinds of ceramic tile, in particular porcelain stoneware, and other coating materials such as marble and granite.
    • Measurement Ø 8 Mm. Maximum drilling length-40mm
    Rubi 05926 - Drygres Drill Bits 4Drill 10MM
      Rubi - Drygres Drill Bits 4Drill 10MM Model # 05926

     
    • Minimum work speed: 2500 rpm.
    • Hexagonal connection without hammer.
    • Ideal for battery-powered drills.
    Rubi 05927 - Drygres Drill Bits 4Drill 12MM
      Rubi - Drygres Drill Bits 4Drill 12MM Model # 05927

     
    • DRYGRES 4DRILL diamond drill bits are designed for use with electric drills (including cordless drills). Hexagonal connection of drill bits with 13 mm head.
    • The drilling depth of the DRYGRES 4DRILL is 36 mm for the diameters 6, 8 and 10 mm, and 40 mm for the diameters 12, 14 and 20 mm.
    • All DRYGRES 4DRILL bits have a wax inside. The wax melts with the use of the drill bit and improves cooling and removal of drilling debris.
    Rubi 05928 - Drygres Drill Bits 4Drill 14MM
      Rubi - Drygres Drill Bits 4Drill 14MM Model # 05928

     
    • DRYGRES 4DRILL diamond drill bits are designed for use with electric drills.
    • Hexagonal connection of drill bits with 13 mm head.
    • The drilling depth of the DRYGRES 4DRILL is 36 mm for the diameters 6, 8 and 10 mm, and 40 mm for the diameters 12, 14 and 20 mm. All DRYGRES 4DRILL bits have a wax inside.
    Rubi 05929 - Drygres Drill Bits 4Drill 20MM
      Rubi - Drygres Drill Bits 4Drill 20MM Model # 05929

     
    • EXTRA long-life due to resistance welding of diamond particles and metal alloy. These tile drill bits are amongst the best on the market in terms of number of holes.
    • Especially designed for drilling porcelain tiles. Also suitable for drilling other porcelain materials and natural stone.
    • For bathrooms, kitchens, DIY, pools and large formats.
    Rubi 50944 - Multidrill Guide Max: 83mm, centering hole 6-12mm  Suction cup 110mm
      Rubi - Multidrill Guide Max: 83mm, centering hole 6-12mm Suction cup 110mm Model # 50944

     
    • Fixing by suction cup. It allows to realize horizontal and vertical drill holes in the exact place, avoiding the displacement of the bit.
    • Compatible with both dry cutting bits and wet cutting bits (required MULTRIDRILL guide tank ref 50947).
    • It incorporates centering holes for drill bits from Ø 6 to 12 mm.
    Rubi 51908 - Multidrill Plus Guide Max:120mm centering hole 6-14mm Suction cup 120mm
      Rubi - Multidrill Plus Guide Max:120mm centering hole 6-14mm Suction cup 120mm Model # 51908

     
    • The MULTIDRILL PLUS guide allows efficient centering in both dry and wet cutting hole.
    • The MULTIDRILL PLUS guide is fixed by means of a suction cup, directly on the surface to be drilled, either horizontally or vertically.
    • Thanks to the RM suction cup, the MULTIDRILL PLUS guide is fixed to smooth, rough or slightly structured surfaces.
    Rubi 50947 - Tank 1200ml and 2m Hose for Multidrill Guide
      Rubi - Tank 1200ml and 2m Hose for Multidrill Guide Model # 50947

     
    • Allows for proper cooling of FORAGRES, MINIGRES and EASYGRES wet cutting bits
    • 40.6 fl oz tank capacity, with manual pressure pump
    • Includes 6.6 ft. (2 m) of hose
    Rubi 61974 - Diamond Polishing Pad Grain 60 55x90mm
      Rubi - Diamond Polishing Pad Grain 60 55x90mm Model # 61974

     
    • # 60, # 120 and # 200 for polishing.
    • Wet use is recommended.
    • Different grit sizes:
    • Semi-flexible. Good adaptation to the user’s hand.
    Rubi 61975 - Diamond Polishing Pad Grain 120 55x90mm
      Rubi - Diamond Polishing Pad Grain 120 55x90mm Model # 61975

     
    • Rubi® Manual diamond polishing pads The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles.
    • The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user’s hand.
    • The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use.
    Rubi 61976 - Diamond Polishing Pad Grain 200 55x90mm
      Rubi - Diamond Polishing Pad Grain 200 55x90mm Model # 61976

     
    • Rubi® Manual diamond polishing pads The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles.
    • The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user’s hand.
    • The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use.
    Rubi 61977 - Diamond Polishing Pad Grain 400 55x90mm
      Rubi - Diamond Polishing Pad Grain 400 55x90mm Model # 61977

     
    • Rubi® Manual diamond polishing pads The range of RUBI manual diamond polishing pads is ideal for edge grinding and polishing, both for surface cuts of natural stone and ceramic tiles.
    • The RUBI manual diamond polishing pads are semi-flexible diamond and their EVA body means they have excellent adaptation to the user’s hand.
    • The grip has a side slit that increases the ergonomics of the block and reduces hand fatigue during use.
    Rubi 65989 - Steel Notched Trowel 11″ 1/8×1/8 (3×3 mm)
      Rubi - Steel Notched Trowel 11″ 1/8×1/8 (3×3 mm) Model # 65989

     
    • Rustproof stainless steel blade
    • Comfortable and durable rubber grip
    • Protection by clear coat
    Rubi 65982 - Steel Notched Trowel 11″ 1/4×1/4 (6x6mm)
      Rubi - Steel Notched Trowel 11″ 1/4×1/4 (6x6mm) Model # 65982

     
    • Rubi 65982 6mm Wooden Handle 
    • Hardened Steel Tile Trowel Rubi 65982
    • square notch professional tile trowel manufactured to be highly resistant to wear with a comfortable wooden handle. 
    Rubi 65984 - Steel Notched Trowel 11″ 3/8×3/8 (8×8 mm)
      Rubi - Steel Notched Trowel 11″ 3/8×3/8 (8×8 mm) Model # 65984

     
    • Rubi 65984 8mm Wooden Handle Hardened Steel Tile Trowel.
    • Rubi 65984 square notch professional tile trowel manufactured to be highly resistant to wear with a comfortable wooden handle..
    Rubi 65985 - Steel Notched Trowel 11″ 13/32×13/32 (10×10 mm)
      Rubi - Steel Notched Trowel 11″ 13/32×13/32 (10×10 mm) Model # 65985

     
    • Steel plate
    • special high wear resistance with corrosion protection by clear coat
    • Stainless steel plate special high wear resistance (INOX).
    Rubi 74947 - Steel Notched Trowel 11″ 1/2×1/2 (12x12mm)
      Rubi - Steel Notched Trowel 11″ 1/2×1/2 (12x12mm) Model # 74947

     
    • Wooden Handle for Comfort
    • Hardened Steel
    • For Floor Tiling
    Rubi 25903 - Steel Notched Trowel 11″ (6X6mm)
      Rubi - Steel Notched Trowel 11″ (6X6mm) Model # 25903

     
    • Rubi Basic Line Square Notched Trowel
    • 6×6
    • open plastic Handle
    • Rubi Trowel Plate made out of steel
    Rubi 25905 - Steel Notched Trowel 11″ (8X8m)
      Rubi - Steel Notched Trowel 11″ (8X8m) Model # 25905

     
    • The trowels and notched trowels with open bi-colour plastic handles have a special high wear resistant steel plate and corrosion protection with colourless varnish (STEEL).
    • The sheet on the trowels and notched trowels with open bi-colour plastic handle measures 28 x 12 cm.
    • One of the features of all RUBI trowels and notched trowels is the perfect flatness of the plate.
    Rubi 25906 - Steel Notched Trowel 11″ (10X10m)
      Rubi - Steel Notched Trowel 11″ (10X10m) Model # 25906

     
    • The trowels and notched trowels with open bi-colour plastic handles have a special high wear resistant steel plate and corrosion protection with colourless varnish (STEEL).
    • The sheet on the trowels and notched trowels with open bi-colour plastic handle measures 28 x 12 cm.
    • One of the features of all RUBI trowels and notched trowels is the perfect flatness of the plate.
    Rubi 25907 - Steel Notched Trowel 11″ (12X12m)
      Rubi - Steel Notched Trowel 11″ (12X12m) Model # 25907

     
    • The trowels and notched trowels with open bi-colour plastic handles have a special high wear resistant steel plate and corrosion protection with colourless varnish (STEEL).
    • The sheet on the trowels and notched trowels with open bi-colour plastic handle measures 28 x 12 cm.
    • One of the features of all RUBI trowels and notched trowels is the perfect flatness of the plate.
    Rubi 20924 - Plastic Trowel with Sponge 28×19.5×2.5cm
      Rubi - Plastic Trowel with Sponge 28×19.5×2.5cm Model # 20924

     
    • Floats for grout cleaning and finishing of joints.
    • The PLUS model has longitudinal cuts for increased performance in wiping away dirt.
    • Polyurethane Sponge
    Rubi 10607 - Rubber Grout Trowel 22.5x10x1.5cm
      Rubi - Rubber Grout Trowel 22.5x10x1.5cm Model # 10607

     
    • RUBI has a wide range of rubber floats for grouting ceramic tiles, with ergonomic plastic handles.
    • PRO grout floats by RUBI are available in different hardnesses of rubber for the best finish according to the grout joint width.
    • One of the PRO grout float models features a white abrasion resistant rubber sheet, and offers a high flexibility, ideal for filling joints up to 3 mm wide. This flexibility ensures homogeneous joint filling and perfect compaction of the grouting material.
    Rubi 72980 - Tile Beating Block with Rubber 40×14.5cm
      Rubi - Tile Beating Block with Rubber 40×14.5cm Model # 72980

     
    • RUBI tile beating blocks are designed so that professional tile fixers can ensure a good positioning and a good level of adhesive coverage during fixing.
    • RUBI manufactures its tile beating blocks using waterproof and highly abrasion resistant wood with excellent resistance to water and moisture.
    • The most striking feature of the RUBI tile beating blocks is their perfect flatness, owing to which, professional tile fixers can have the utmost confidence in the product.
    Rubi 83942 - Nipper for Porcelain Tiles Max: 1cm
      Rubi - Nipper for Porcelain Tiles Max: 1cm Model # 83942

     
    • Great for mosaic work
    • Used for cutting and shaping porcelain, glass or ceramic tiles
    • With tungsten carbide scoring wheels with surface treatment of titanium for longer treatment
    Rubi 65926 - Nipper for Ceramic Tiles
      Rubi - Nipper for Ceramic Tiles Model # 65926

     
    • Tungsten Carbide edge of great hardness.
    • With Tungsten Carbide edge for greater durability.
    • For grinding straight cuts in tile and ceramic flooring.
    Rubi 66941 - 3 speed Grout Out Machine 230V, Rubiscraper-250
      Rubi - 3 speed Grout Out Machine 230V, Rubiscraper-250 Model # 66941

     
    • Ergonomic design and bi-material finishing, for greater comfort and better stability.
    • Light and resistant. Maximum reliability.
    • Blades made in tungsten carbide.
    Rubi 65907 - Joint Scraper
      Rubi - Joint Scraper Model # 65907

     
    • Traditional grout scraper with an ergonomic handle
    • Two platelets of electro-deposited tungsten carbide
    • Combinable with 1, 2 or 3 plates
    Rubi 71974 - Spare Joint Scraper
      Rubi - Spare Joint Scraper Model # 71974

     
    • Rubi replacement blades (ref: 71974)
    • for Rubi Joint Scraper Ref 65907
    • Each pack contains 2 spare blades
    Rubi 66810 - Rubiscraper Blade for Grouts 1.5MM
      Rubi - Rubiscraper Blade for Grouts 1.5MM Model # 66810

     
    • Blade reafilable and easily interchangeable.
    • For the cleaning of the mortar joint of 1.5 mm.
    • Available in several sizes to fit various widths of existing board.
    Rubi 66811 - Rubiscraper Blade for Grouts 2MM
      Rubi - Rubiscraper Blade for Grouts 2MM Model # 66811

     
    • Re-sharpening and easily interchangeable blade.
    • For cleaning mortar joints in 0.079 in
    • Available in various sizes to accommodate various existing board widths.
    Rubi 66812 - Rubiscraper Blade for Grouts 3MM
    Rubi 70925 - Shape Template Max depth: 4.5cm
      Rubi - Shape Template Max depth: 4.5cm Model # 70925

     
    • The RUBI shape template is probably one of the most sought tools by professionals, not only by ceramic tile fixers, but people from other branches within the construction industry.
    • With the RUBI shape template, the user can easily copy forms in difficult to mark areas and transpose these markings to ceramic tiles for subsequent cutting.
    • To copy a shape, you only have to press the template against the element that will serve as a frame and without any further adjustment you will have the exact shape on your shape template.
    Rubi 72953 - Hole Marker XL Max length: 65mm
      Rubi - Hole Marker XL Max length: 65mm Model # 72953

     
    • This simple tool copies and transposes, quickly, easily and accurately, the position of holes for pipes, water or light fittings, electrical boxes or any other element that professional tilers come across during tile fixing, from the wall to the ceramics, for its subsequent cutting or drilling.
    • For marking the position of holes for tubing and electrical fitting, from the wall to the tile, for subsequent cutting or drilling.
    • Length: 17” (45 cm).
    Rubi 65904 - Black Rubber Mallet 8.8 oz. (250 gr.)
      Rubi - Black Rubber Mallet 8.8 oz. (250 gr.) Model # 65904

     
    • The flat face mallet is one of the most commonly used tools for the professional installer of ceramic tile
    • The main function of the right rubber mallet is to facilitate the establishment and position of the ceramic tile for your installation
    • The Rubi are synonymous with warranty for the professional face hammers rubber flat; its design has been developed to reduce the vibrations of the impact, avoiding the from the user
    Rubi 65905 - Black Rubber Mallet 17.6 oz. (500 gr.)
      Rubi - Black Rubber Mallet 17.6 oz. (500 gr.) Model # 65905

     
    • Allows hitting at any angle.
    • Easy to use.
    • Easy to transport
    Rubi 65908 - Black Rubber Mallet 26.4 oz. (750 gr.)
      Rubi - Black Rubber Mallet 26.4 oz. (750 gr.) Model # 65908

     
    • Allows hitting at any angle.
    • One flat surface and the other spherical
    • Rubber mallet – flat
    Rubi 65912 - White Rubber Mallet 8.8 oz. (250 gr.)
      Rubi - White Rubber Mallet 8.8 oz. (250 gr.) Model # 65912

     
    • Flat 2-sided
    • Flat sides allow smaller, lighter hammer to be more effective
    • Wooden handle has 3 grooves to improve grip
    Rubi 65913 - White Rubber Mallet 17.6 oz. (500 gr.)
    Rubi 65914 - White Rubber Mallet 26.4 oz. (750 gr.)
      Rubi - White Rubber Mallet 26.4 oz. (750 gr.) Model # 65914

     
    • The main function of the rubber mallet is to facilitate the correct laying and positioning of the ceramic tile during its installation.
    • RUBI flat-faced rubber mallets are synonymous with a professional guarantee; its design has been developed to reduce impact vibrations and prevent the user from suffering them.
    • Flat Face Mallets are available in three different weights: 8.82 oz, 17.64 oz, 26.46 oz, as well as traditional black rubber or beneficial white rubber.
    Rubi 66924 - Folding 4 in 1 Working Table 80x52x12.5cm
      Rubi - Folding 4 in 1 Working Table 80x52x12.5cm Model # 66924

     
    • 4 uses in 1: Work bench, scaffold, dolly and creeper.
    • Foldable, easy to transport and storage.
    • Double sided board: MDF wood side (work bench function) and non-slippery PP plastic side (rest of functions). EASY interchangeable.
    Rubi 20905 - Smooth Rubinet Sponge SuperPro
      Rubi - Smooth Rubinet Sponge SuperPro Model # 20905

     
    • Made from flexible polyurethane, polyester base.
    • Ideal for general cleaning of all surfaces; Suitable for easy cleaning of ceramic tiles.
    • Medium level of absorption.
    Rubi 2911 - Tile Spacers 1/32″ (1 mm.) – 300pcs
      Rubi - Tile Spacers 1/32″ (1 mm.) – 300pcs Model # 2911

     
    • To space tiles evenly.
    • For use with all tile sizes and shapes.
    • Other sizes available.
    Rubi 2912 - Tile Spacers 1/16″ (1.5 mm.) – 300pcs
      Rubi - Tile Spacers 1/16″ (1.5 mm.) – 300pcs Model # 2912

     
    • Higher rigidity spacer specially designed for use with large format coatings. Quality base material, without impurities or imperfections. Underside designed for good bonding to the bonding material.
    • Spacers for large format and rectified ceramics.
    • Spacers for rustic and large format tiles.
    Rubi 2901 - Tile Spacers 3/32″ (2 mm.) – 300pcs
      Rubi - Tile Spacers 3/32″ (2 mm.) – 300pcs Model # 2901

     
    • Quality Rubi Spacers
    • Available in handy 300 pc pack
    • Great for creating a small grout line
    Rubi 2902 - Tile Spacers 1/8″ (3 mm.) – 200pcs
      Rubi - Tile Spacers 1/8″ (3 mm.) – 200pcs Model # 2902

     
    • For evenly spacing tiles.
    • For use with all tile sizes and shapes.
    • Other sizes available in the range.
    Rubi 2903 - Tile Spacers 3/16″ (5 mm.) – 100pcs
      Rubi - Tile Spacers 3/16″ (5 mm.) – 100pcs Model # 2903

     
    • For floor tiles
    • Quality base material, without impurities or imperfections
    • Hollow structure with internal reinforcements; supports the tensions and allows to leave into the joint and to grout over
    Rubi 2036 - Tile Spacers 1/4″ (6 mm.) – 100pcs
      Rubi - Tile Spacers 1/4″ (6 mm.) – 100pcs Model # 2036

     
    • Crosshead for flooring
    • Quality base material, without impurities or imperfections
    • Hollow structure with internal reinforcements; withstands stresses and allows gripping material to enter
    Rubi 2037 - Tile Spacers 5/16″ (8 mm.) 50pcs
      Rubi - Tile Spacers 5/16″ (8 mm.) 50pcs Model # 2037

     
    • Manufacture with high precision and regularity
    • Total absence of rough edges.
    • Use only Rubi tile spacers and you will obtain the best
      possible finish in all your tiling and flooring jobs.
    Rubi 2905 - Tile Spacers 13/32″ (10 mm.) – 50pcs
      Rubi - Tile Spacers 13/32″ (10 mm.) – 50pcs Model # 2905

     
    • The primary use for these 10mm junction crosses is for rustic or industrial ceramic tile flooring.
    • RUBI 10mm gaskets are made from a high quality base material and are free of imperfections or burrs.
    • The internal geometry of the junction crosses is hollow. Thanks to the design with internal reinforcements, they support tension and do not crush.
    Rubi 03901 - Delta Level System Plier Fast-Fix
      Rubi - Delta Level System Plier Fast-Fix Model # 03901

     
    • Use with Rubi wedges and straps to eliminate tile lippage
    • Use to level floor and wall tile
    • Rubi Delta tile leveling system prevents tiles from moving during installation
    Rubi 2844 - Delta Level System Wedge – 200pcs
      Rubi - Delta Level System Wedge – 200pcs Model # 2844

     
    • 200 reusable wedges.
    • Prevents movement of parts when adhesive is setting and enhances the resulting surface surface.
    • Working time is reduced and the profitability of installation work is improved, both on floors and wall tiles
    Rubi 3930 - Delta Level System Strip 3-12mm, 0.5mm – 200pcs
      Rubi - Delta Level System Strip 3-12mm, 0.5mm – 200pcs Model # 3930

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 2851 - Delta Level System Strip 3-12mm, 1mm – 200pcs
      Rubi - Delta Level System Strip 3-12mm, 1mm – 200pcs Model # 2851

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings
    Rubi 2841 - Delta Level System Strip 3-12mm, 1.5mm – 200pcs
      Rubi - Delta Level System Strip 3-12mm, 1.5mm – 200pcs Model # 2841

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 2842 - Delta Level System Strip 3-12mm, 1.5mm – 400pcs
      Rubi - Delta Level System Strip 3-12mm, 1.5mm – 400pcs Model # 2842

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 2853 - Delta Level System Strip 3-12mm, 2mm – 200pcs
      Rubi - Delta Level System Strip 3-12mm, 2mm – 200pcs Model # 2853

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 2867 - Delta Level System Strip 6-15mm, 3mm  -200pcs
      Rubi - Delta Level System Strip 6-15mm, 3mm -200pcs Model # 2867

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 2846 - Delta Level System Strip 11-20mm, 1.5mm – 100pcs
      Rubi - Delta Level System Strip 11-20mm, 1.5mm – 100pcs Model # 2846

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 2858 - Delta Level System Strip 11-20mm, 2mm – 100pcs
      Rubi - Delta Level System Strip 11-20mm, 2mm – 100pcs Model # 2858

     
    • For 12″x12″ (30x30cm) formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 12957 - TP-75-T Manual Tile Cutter for Ceramic and Porcelain
      Rubi - TP-75-T Manual Tile Cutter for Ceramic and Porcelain Model # 12957

     
    • Single guide system highly resistant to impacts for longer life
    • Ergonomic handle with embedded breaker for speed and ease of use
    • Swivel square with central pivot for fast and accurate measurement of angular cuts
    • Long-lasting laser engraved square
    Rubi 1992 - Plus Scoring Wheel 3/4in (18mm)
      Rubi - Plus Scoring Wheel 3/4in (18mm) Model # 1992

     
    • Is made of sintered tungsten carbide.
    • Each wheel is rectified in a unit manner so that each diameter has an incision angle according to its function and use.
    • Each diameter of wheel offers different results and yields, depending on the type of ceramic material.
    Rubi 50994 - TC-180 230V-50Hz 180mm Electric Circular Saw Kit
      Rubi - TC-180 230V-50Hz 180mm Electric Circular Saw Kit Model # 50994

     
    • This power tool allows the user to reduce the handling of heavy or unwieldy parts. Thus achieving greater efficiency in the work of installing large format pieces.
    • The TC-180 circular saw is equipped to work in both wet cutting (hose connection) and dry cutting (vacuum cleaner connection).
    • The user can easily adjust the cutting thickness up to 55 mm, and it can be adapted to the nature of the various materials wanted to be cut.
    Rubi 18959 - Slim Cutter Plus – Manual Tile Cutter for Large Format Porcelain Tiles, with Carry Bag
      Rubi - Slim Cutter Plus – Manual Tile Cutter for Large Format Porcelain Tiles, with Carry Bag Model # 18959

     
    • 110 cm long extruded aluminium guides which can be connected together
    • Breaking system with adjustable soft-grip nippers ensures progressive breaking of the tile without cracking
    • Recommended for porcelain tiles with thickness between 3 and 10mm
    Rubi 26972 - Rubimix-9 Super Torque 220V; 50/60Hz Electric Mixer
      Rubi - Rubimix-9 Super Torque 220V; 50/60Hz Electric Mixer Model # 26972

     
    • The most notable feature of the RUBIMIX-9 SUPERTORQUE is its great force (40.2 Nm torque). This torque is necessary to be able to mix high viscosity materials without the equipment being unnecessarily over-stressed.
    • Its two-speed mechanical gearbox allows us to choose between two RPM ranges; from 0 to 450 and from 0 to 780. Speeds that we can regulate by pressing directly on the trigger, which is also equipped with a soft start system.
    • The combination of torque, power and speed make the RUBIMIX-9 SUPERTORQUE a safe bet to obtain perfectly homogeneous mixes in any material. It also includes a safety lock to prevent inadvertent start-up
    Rubi 76946 - M-100 3H Hex Rod Mortar Mixer Paddle
      Rubi - M-100 3H Hex Rod Mortar Mixer Paddle Model # 76946

     
    • The mixer paddle has a hexagonal adaptable finish which can be adapted to all RUBIMIX models by using the chuck accessory (Ref. 71967) or a traditional electric drill.
    • The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
    • With mortar mixer paddles, the material rises, at a low speed, up the inside of the paddle head and then come back down the outside.
    Rubi 76919 - M-140 R 3H Mortar Mixer Paddle
      Rubi - M-140 R 3H Mortar Mixer Paddle Model # 76919

     
    • This range of mortar mixer paddles has a M14 x 2 thread connection which is directly adaptable to all RUBIMIX electric mixers and to most other brands.
    • The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
    • The 3H rods have a 3-blade propeller head for a greater mixing efficiency.
    Rubi 76940 - M-160 R 3H Mortar Mixer Paddle
      Rubi - M-160 R 3H Mortar Mixer Paddle Model # 76940

     
    • This range of mortar mixer paddles has a M14 x 2 thread connection which is directly adaptable to all RUBIMIX electric mixers and to most other brands.
    • The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
    • The 3H rods have a 3-blade propeller head for a greater mixing efficiency.
    Rubi 76944 - M-160 FI 3H Mortar Mixer Paddle
      Rubi - M-160 FI 3H Mortar Mixer Paddle Model # 76944

     

    This product has been discontinued by the manufacturer.

    • The range of FAST-IN mortar paddles features the unique tool-free quick connection system, FAST-IN from RUBI, and allows the user to change mixer paddles without tools, quickly and easily.
    • The mixer paddles for cementitious mortars have a head designed to perform a movement from the bottom up.
    • The 3H rods have a 3-blade propeller head for a greater mixing efficiency. The head generates fewer vibrations; therefore, the user will be able to work in greater comfort.
    Rubi 76973 - M-140 R 3H ZN Mortar Mixer Paddle
      Rubi - M-140 R 3H ZN Mortar Mixer Paddle Model # 76973

     
    • This range of mixing rods for mortars, thanks to the galvanized finish, prevents oxidation of the rod, extending the life of it.
    • In addition, by not wearing any physical coating, there is no risk of contaminating the resulting mixture.
    • The range has rods with M14 x 2 thread connection, adaptable directly to all RUBIMIX electric mixers and the vast majority of other brands, and rods with hexagonal finish, adaptable to the drill head, in the smallest diameters (100 and 120 mm ).
    • The mixing rods for galvanized cement mortars have a head designed to perform a movement from bottom to top.
    Rubi 65934 - L-100 Liquid Mixer Paddle 22in
      Rubi - L-100 Liquid Mixer Paddle 22in Model # 65934

     
    • The paddles in this range have a 10mm hexagonal finish, which is adaptable to all RUBIMIX models by using the chuck accessory (Ref. 71967) or a traditional electric drill.
    • The liquid mixer paddles have a head design which means that, when in operation, they exert a downward movement on the material to be mixed.
    • This downward movement is the most suitable and recommended movement for mixing low-viscosity materials such as paints, insulating material, dispersion adhesives, fibers, plaster, etc.
    Rubi 52930 - DS-250-N-1300 220V Electric Tile Cutter
      Rubi - DS-250-N-1300 220V Electric Tile Cutter Model # 52930

     
    • Motor assembly mounted on sliding bearings for maximum precision and reliability
    • Aluminium structure for a lightweight machine with maximum resistance to working conditions
    • Wheels and handle included for easy transport
    Rubi 52940 - DS-250-N-1500 220V Electric Tile Cutter
      Rubi - DS-250-N-1500 220V Electric Tile Cutter Model # 52940

     
    • Motor assembly mounted on sliding bearings for maximum precision and reliability
    • Aluminium structure for a lightweight machine with maximum resistance to working conditions
    • Wheels and handle included for easy transport
    Rubi 56940 - DR-350 220V Electric Tile Cutter
      Rubi - DR-350 220V Electric Tile Cutter Model # 56940

     
    • Head with high performance plunge effect for large cutting capacity
    • Large table size provides a large work surface
    • Robust steel structure for increased resistance to wear
    Rubi 51910 - Baseboard Lateral Stop for DV/DC/DS/DX
      Rubi - Baseboard Lateral Stop for DV/DC/DS/DX Model # 51910

     
    • Designed to facilitate 45° machining of top pieces for skirting boards.
    • Millimeter adjustment for guaranteed parallelism of cut
    • Fits DV/DC/DS/DX series tile cutters
    Rubi 18948 - Rubi Triller 230V 50HZ Electric Tamping System
      Rubi - Rubi Triller 230V 50HZ Electric Tamping System Model # 18948

     
    • It is recommended, to a greater extent, in porcelain sheet installation work and above all, in formats greater than 300 cm x 100 cm.
    • It can also be used for the installation and correct fixing of uncoupling or waterproofing sheets.
    • It is light weight which only weighs 4.8 kg and can facilitates its use on vertical supports and work at height.
    Rubi 30946 - 8″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-200 SUPERPRO
      Rubi - 8″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-200 SUPERPRO Model # 30946

     
    • 200mm continuous rim diamond blade.
    • For cutting general ceramic tiles upto 25mm thick.
    • For wet cutting.
    Rubi 30949 - 10″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-250 SUPERPRO
      Rubi - 10″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-250 SUPERPRO Model # 30949

     
    • 250mm continuous rim diamond blade
    • For cutting general ceramic tiles upto 25mm thick
    • For wet cutting
    Rubi 30950 - 12″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-300 SUPERPRO
      Rubi - 12″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-300 SUPERPRO Model # 30950

     
    • Ideal for use with wet saws
    • Standard quality diamond
    • High quality cut, extreme user safety
    Rubi 30951 - 14″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-350 SUPERPRO
      Rubi - 14″ Ceramic Tiles Continuous Rim Diamond Blade, CEV-350 SUPERPRO Model # 30951

     
    • Disc for general cutting of ceramic tiles such as tile, glazed stoneware, porcelain stoneware
    • The best finish. For cutting and mitering ceramic tile and other stone coating materials with thicknesses < 25 mm
    • Great performance
    Rubi 30926 - 8″ Hard Material Continuous Rim Diamond Blade, CPA-200 SUPERPRO
      Rubi - 8″ Hard Material Continuous Rim Diamond Blade, CPA-200 SUPERPRO Model # 30926

     
    • Recommended blades to cut hard materials such as granite, rustic tiles, klinker, fire bricks, slate.
    • The best finish. To cut and mitre ceramic tiles and other stone coating materials with less than 1″ (25 mm.) thickness.
    Rubi 30929 - 10″ Hard Material Continuous Rim Diamond Blade, CPA-250 SUPERPRO
      Rubi - 10″ Hard Material Continuous Rim Diamond Blade, CPA-250 SUPERPRO Model # 30929

     
    • Recommended blades to cut hard materials such as granite, rustic tiles, klinker, fire bricks, slate.
    • The best finish. To cut and mitre ceramic tiles and other stone coating materials with less than 1″ (25 mm.) thickness.
    Rubi 30930 - 12″ Hard Material Continuous Rim Diamond Blade, CPA-300 SUPERPRO
      Rubi - 12″ Hard Material Continuous Rim Diamond Blade, CPA-300 SUPERPRO Model # 30930

     
    • The RUBI CPA saw blade is specially designed for cutting hard materials such as granite, clinker, slate, etc.
    • The CPA saw blade from RUBI is ideal for straight and miter cutting of tiles, composite and other wall covering materials that are extremely hard up to a thickness of 25 mm. The RUBI CPA saw blade combines different metals in the diamond edge together with a very high and fine quality diamond.
    • This ensures that we can offer a wet-use saw blade to satisfied customers all over the world
    Rubi 30931 - 14″ Hard Material Continuous Rim Diamond Blade, CPA-350 SUPERPRO
      Rubi - 14″ Hard Material Continuous Rim Diamond Blade, CPA-350 SUPERPRO Model # 30931

     
    • The RUBI CPA saw blade is specially designed for cutting hard materials such as granite, clinker, slate, etc.
    • The CPA saw blade from RUBI is ideal for straight and miter cutting of tiles, composite and other wall covering materials that are extremely hard up to a thickness of 25 mm. The RUBI CPA saw blade combines different metals in the diamond edge together with a very high and fine quality diamond.
    • This ensures that we can offer a wet-use saw blade to satisfied customers all over the world
    Rubi 30956 - 8″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-200 PRO
      Rubi - 8″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-200 PRO Model # 30956

     
    • Recommended blade to cut fine porcelain tiles with thicknesses of less than 25 mm.
    • Specially recommended for mitre cutting.
    Rubi 30959 - 10″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-250 PRO
      Rubi - 10″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-250 PRO Model # 30959

     
    • 250mm continuous rim diamond blade
    • For Porcelain tiles up to 25mm
    • For wet cutting
    Rubi 30960 - 12″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-300 PRO
      Rubi - 12″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-300 PRO Model # 30960

     
    • Currently, one of the biggest problems for the tiler is cutting porcelain tiles.
    • At RUBI we know how people work in all countries of the world.
    • We know what the tiler requires of his tile installation and repair tools.
    Rubi 30961 - 14″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-350 PRO
      Rubi - 14″ Porcelain Tiles Continuous Rim Diamond Blade, CPC-350 PRO Model # 30961

     
    • Specialist diamond blade for fine cutting of porcelain tiles
    • Diameter: 230mm. Bore: 22.2mm
    • For use with wet tile saws
    Rubi 30964 - 8″ Porcelain Tiles J-Slot Diamond Blade, CPX-200 PRO
      Rubi - 8″ Porcelain Tiles J-Slot Diamond Blade, CPX-200 PRO Model # 30964

     
    • Measurements : 200 x 25.4 x 1.6 mm
    • Max R.P.M 7650 1/min – 80 m/s.

     

    Rubi 30962 - 10″ Porcelain Tiles J-Slot Diamond Blade, CPX-250 PRO
      Rubi - 10″ Porcelain Tiles J-Slot Diamond Blade, CPX-250 PRO Model # 30962

     
    • Recommended disc to cut fine porcelain tiles.
    • High Tech. High speed on straight cuts on porcelain tiles.
    • Only for straight cuts, not suitable for mitring.
    Rubi 30963 - 12″ Porcelain Tiles J-Slot Diamond Blade, CPX-300 PRO
      Rubi - 12″ Porcelain Tiles J-Slot Diamond Blade, CPX-300 PRO Model # 30963

     
    • J-SLOT – CPX wet use saw blade from RUBI is specially designed for porcelain tiles
    • The CPX saw blade is particularly recommended for straight cuts in porcelain tiles and especially when a clean finish is desired.
    • Due to the thin blade, the CPX saw blade is not suitable for miter cuts
    Rubi 31936 - 8″ Hard Material Turbo Viper Diamond Blade, TVH-200 SUPERPRO
      Rubi - 8″ Hard Material Turbo Viper Diamond Blade, TVH-200 SUPERPRO Model # 31936

     
    • TVH-200 Superpro hard materials diamond blade recommended for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile.
    • Market knowledge and hard work allow RUBI to offer the building professional the TURBO VIPER – TVH diamond blade.
    • 200m Outer diameter, 25.4mm Inside diameter, 10mm Disc segment height, 1.6mm segment thickness.
    Rubi 31937 - 10″ Hard Material Turbo Viper Diamond Blade, TVH-250 SUPERPRO
      Rubi - 10″ Hard Material Turbo Viper Diamond Blade, TVH-250 SUPERPRO Model # 31937

     
    • Recommended blade for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile.
    • The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality.
    • Only for straight cuts, not suitable for mitring.
    Rubi 31938 - 12″ Hard Material Turbo Viper Diamond Blade, TVH-300 SUPERPRO
      Rubi - 12″ Hard Material Turbo Viper Diamond Blade, TVH-300 SUPERPRO Model # 31938

     
    • Recommended blade for cutting hard materials such as porcelain tiles, granite, rustic tiles, clinker, refractory and slate.
    • The specific design of the diamond band offers greater speed of cutting harder materials without sacrificing finish quality.
    • Only for straight cuts, not suitable for mitring.
    Rubi 79050 - RUBIFLEX PFP33 Bi-material Handle Brick Trowel 6-3/4in x 2in (170×50 mm)
      Rubi - RUBIFLEX PFP33 Bi-material Handle Brick Trowel 6-3/4in x 2in (170×50 mm) Model # 79050

     
    • RUBI also has the exclusive line with RUBIFLEX® bi-material ergonomic handles, a design that provides great shock resistance.
    • The elastic coating of RUBIFLEX® handles reduces slippage and provides the maximum grip.
    • The plates on RUBI PFP33 brick trowels receive a specific heat treatment that improves their flexibility and reduces wear.
    • The fibers of the plate have been oriented lengthwise during rolling.
    Rubi 3914 - Delta Level System Kit 1.5mm
      Rubi - Delta Level System Kit 1.5mm Model # 3914

     
    • Made of steel with ergonomic plastic handles.
    • 6 positions height adjustment according to the thickness of the ceramic tile.
    • Protective sleeve on the clamp to avoid damaging the tile.
    • The kit consists of 1 pliers, 100 strips and 100 reusable wedges.
    Rubi 3915 - Delta Level System Kit 2mm
      Rubi - Delta Level System Kit 2mm Model # 3915

     
    • Made of steel with ergonomic plastic handles.
    • 6 positions height adjustment according to the thickness of the ceramic tile.
    • Protective sleeve on the clamp to avoid damaging the tile.
    • The kit consists of 1 pliers, 100 strips and 100 reusable wedges.
    Rubi 2868 - Delta Level System Strip 3mm/6-15mm (400-pieces)
      Rubi - Delta Level System Strip 3mm/6-15mm (400-pieces) Model # 2868

     
    • For 30 x 30 cm formats and more. Always double gluing.
    • Ensures the flatness and regularity of the surface
    • It avoids the generation of eyebrows during the laying of ceramic tiles, both in pavements and in coatings.
    Rubi 60971 - Vulkolan Grout Spatula 20 in (50 cm)
      Rubi - Vulkolan Grout Spatula 20 in (50 cm) Model # 60971

     
    • To fill the joints between tiles.
    • Specially for cement based grout mortars.
    Rubi 25946 - M-120 DUPLEX Mortar Mixing Paddle 120mm
      Rubi - M-120 DUPLEX Mortar Mixing Paddle 120mm Model # 25946

     
    • With these paddles, the user can mix 30 to 50 kg of cementitious mortar or adhesive.
    • For viscous and resistant materials such as cementitious adhesives for ceramic tiles, rich in additives such as C2.
    • To mix up to 66.1 – 110.2 Lb. (30 – 50 kg) of glue mortar. M27 x 1.5 thread finish.
    Rubi 52960 - DCX-250-XPERT-1250 220V Electric Tile Cutter
      Rubi - DCX-250-XPERT-1250 220V Electric Tile Cutter Model # 52960

     
    • Reinforced aluminium chassis with innovative triple beam system and steel sides for immproved stability and rigidity
    • Reinforced cutting guide for a better finish
    • New adjustable cooling system increases cooling efficiency and reduces water dispersion
    Rubi 52970 - DCX-250-XPERT-1550 220V Electric Tile Cutter
      Rubi - DCX-250-XPERT-1550 220V Electric Tile Cutter Model # 52970

     
    • Reinforced aluminium chassis with innovative triple beam system and steel sides for immproved stability and rigidity
    • Reinforced cutting guide for a better finish
    • New adjustable cooling system increases cooling efficiency and reduces water dispersion
    Rubi 66905 - Flat/Spherical White Rubber Mallet 250G
      Rubi - Flat/Spherical White Rubber Mallet 250G Model # 66905

     
    • The spherical side of the RUBI flat/spherical-sided rubber mallet allows you to strike ceramic items at any angle and to have a great control over impact.
    • The spherical side also reduces the possibility of moving, involuntarily, the ceramic tile already fitted.
    • The main advantage of using the flat-sided rubber mallet with the white rubber head is that there is no risk of leaving traces of rubber on the surfaces of ceramic tiles.
    Rubi 66907 - Flat/Spherical White Rubber Mallet 750G
      Rubi - Flat/Spherical White Rubber Mallet 750G Model # 66907

     
    • The spherical side of the RUBI flat/spherical-sided rubber mallet allows you to strike ceramic items at any angle and to have a great control over impact.
    • The spherical side also reduces the possibility of moving, involuntarily, the ceramic tile already fitted.
    • The main advantage of using the flat-sided rubber mallet with the white rubber head is that there is no risk of leaving traces of rubber on the surfaces of ceramic tiles.
    Rubi 12956 - TP-75-S Manual Tile Cutter for Ceramic and Porcelain Tiles
      Rubi - TP-75-S Manual Tile Cutter for Ceramic and Porcelain Tiles Model # 12956

     
    • Ergonomic handle and incorporated breaker for speed and ease of use.
    • Swivel square with central pivot for fast and accurate measurement of angular cuts.
    • Long-lasting laser engraved square.
    • For intensive cutting of ceramic tile, ideal for Porcelain tiles.
    Rubi 31939 - 14″ Hard Material Turbo Viper Diamond Blade, TVH-350 SUPERPRO
      Rubi - 14″ Hard Material Turbo Viper Diamond Blade, TVH-350 SUPERPRO Model # 31939

     
    • The TURBO VIPER – TVH saw blade is recommended for cutting hard materials such as granite, clinker, slate and, of course, porcelain tiles.
    • The specific diamond crown design of the TVH saw blade from RUBI offers faster cutting speed in the hardest materials without loss of quality in the finish.
    • This special saw blade combines all good things in a TURBO saw blade, resulting in a fine finish.
    Rubi 31915 - CSV-125 PRO Continuous Ceramic Tiles Diamond Blade 125mm
      Rubi - CSV-125 PRO Continuous Ceramic Tiles Diamond Blade 125mm Model # 31915

     
    • Only for straight cuts, not suitable for mitring with angle grinder.
    • Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain.
    • The best finish to cut and mitre ceramic tiles and other stone coating materials with less than 1″ (25 mm.) of thickness.
    Rubi 31933 - Turbo Viper TVA-125 Super Pro Hard Materials Diamond Blade
      Rubi - Turbo Viper TVA-125 Super Pro Hard Materials Diamond Blade Model # 31933

     
    • Recommended blade for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile
    • Specially designed diamond band offers great speed of cutting harder materials without sacrificing finish quality
    Rubi 30973 - CPR-125 Super Pro Continuous Porcelain Tiles Diamond Blade 125mm
      Rubi - CPR-125 Super Pro Continuous Porcelain Tiles Diamond Blade 125mm Model # 30973

     
    • Recommended blade for cutting hard materials such as granite, rustic tiles, clinker, refractory, slate and porcelain tile
    • Specially designed diamond band offers great speed of cutting harder materials without sacrificing finish quality
    Rubi 31965 - ECD EN1 Super Pro Electroplated Cutting and Grinding Diamond Blade 125mm
      Rubi - ECD EN1 Super Pro Electroplated Cutting and Grinding Diamond Blade 125mm Model # 31965

     
    • For cutting and grinding natural stone, all kind of ceramic tiles and synthetic materials
    • For adjustment cuts and grinding on all types of porcelain and hard materials
    Rubi 25912 - CEV-180 Pro Continuous Ceramic Tiles Diamond Blade 180mm
      Rubi - CEV-180 Pro Continuous Ceramic Tiles Diamond Blade 180mm Model # 25912

     
    • Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain.
    • Best finish for ceramic tiles and other stone coating materials less than 1″ (25 mm) thick
    • For wet cutting
    Rubi 25913 - CEV-200 Pro Continuous Ceramic Tiles Diamond Blade 200mm
      Rubi - CEV-200 Pro Continuous Ceramic Tiles Diamond Blade 200mm Model # 25913

     
    • Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain.
    • Best finish for ceramic tiles and other stone coating materials less than 1″ (25 mm) thick
    • For wet cutting
    Rubi 25934 - CEV-250 Pro Continuous Ceramic Tiles Diamond Blade 250mm
      Rubi - CEV-250 Pro Continuous Ceramic Tiles Diamond Blade 250mm Model # 25934

     
    • Blade for general cut of ceramic tiles as wall tile, floor tiles, porcelain.
    • Best finish for ceramic tiles and other stone coating materials less than 1″ (25 mm) thick
    • For wet cutting
    Rubi 32915 - CPX-200 C Sea Porcelain Tiles Diamond Blade 200mm
      Rubi - CPX-200 C Sea Porcelain Tiles Diamond Blade 200mm Model # 32915

     
    • Recommended blade to cut fine porcelain tiles
    • High tech, high speed straight cuts on porcelain tiles
    • Only suitable for straight cuts, not suitable for mitring
    Rubi 32916 - CPX-250 C Porcelain Tiles Diamond Blade 250mm
      Rubi - CPX-250 C Porcelain Tiles Diamond Blade 250mm Model # 32916

     
    • Recommended blade to cut fine porcelain tiles
    • High tech, high speed straight cuts on porcelain tiles
    • Only suitable for straight cuts, not suitable for mitering
    HUSQVARNA 587905801 - Segmented Marble & Granite Diamond Blade, 350 x 25.4 mm, VARI-CUT S35 Turbo 350, Silver
      HUSQVARNA - Segmented Marble & Granite Diamond Blade, 350 x 25.4 mm, VARI-CUT S35 Turbo 350, Silver Model # 587905801

     
    • High-quality finishing of the cut
    • High speed in hard materials
    • High speed in universal construction materials
    • Ideal for concrete and hard materials
    Rubi 30987 - Turbo Viper Diamond Blade 115mm, TVR-125 SUPERPRO
      Rubi - Turbo Viper Diamond Blade 115mm, TVR-125 SUPERPRO Model # 30987

     
    • Recommended blade to cut hard materials such as granite, rustic tiles, clinker, quartzite, slate and porcelain tiles
    • Robust and reinforced blade
    • Can withstand high tensile forces at blade edges
    Rubi 88928 - Rubber Bucket 85L with 4 handle
      Rubi - Rubber Bucket 85L with 4 handle Model # 88928

     
    • Is suitable for mixing cement and mortar or any other material.
    • Is specially designed to combine resistance and flexibility.
    • Polyamide reinforced with nylon fabric to increase tensile strength.
    • 4 handles is ideal for being carried by 2 people or by a mechanical lifting equipment.
    Rubi 88774 - Flextub Black Plastic Bucket 55L
      Rubi - Flextub Black Plastic Bucket 55L Model # 88774

     
    • Manufactured in a high density polyethylene
    • It is ideal for all kinds of work, either in the construction industry or other sectors.
    • Their shape, very thick walls, and design of their reinforced handles allow users to transport with just one hand.
    Rubi 18980 - Maintenance Kit for Manual Tile Cutters
      Rubi - Maintenance Kit for Manual Tile Cutters Model # 18980

     
    • Cleaning oil and grease
    Rubi 4975 - Foragres Diamond Drill Bit 75 mm
      Rubi - Foragres Diamond Drill Bit 75 mm Model # 4975

     
    • To drill Floor tiles, Porcelain tiles, Granite and Marble.
    • Always use cooled with water and non-hammer electric drill.
    • Ø 1 5/8” (40 mm.) drill bit, designed for housing of toilet flushing mechanisms.
    Rubi RUBI-27909 - HIT-1600 Plus Manual Tile Cutter, 160cm
      Rubi - HIT-1600 Plus Manual Tile Cutter, 160cm Model # RUBI-27909

     
    • Quality tile cutter with double-guide and fixed square
    • High performance multipoint breaker equipped with magnet system
    • Set of sliders with linear ball bearings offer more comfort and softer scoring
    Rubi 03953 - DELTA Tile Leveling Wedge Pack – 200 Pieces
      Rubi - DELTA Tile Leveling Wedge Pack – 200 Pieces Model # 03953

     
    • 200 reusable wedges.
    • Prevents movement of parts when adhesive is setting and enhances the resulting surface surface.
    • Working time is reduced and the profitability of installation work is improved, both on floors and wall tiles
    Rubi 25940 - RUBIMIX-9N 220V Mortar Mixer, 1200W, with 120mm Mixer Paddle
      Rubi - RUBIMIX-9N 220V Mortar Mixer, 1200W, with 120mm Mixer Paddle Model # 25940

     
    • Features switch locking system to prevent unintentional starting of the machine
    • 2-Speed gearbox to select maximum mixing rpm
    • Quick and easy to change the brushes. High comfort.
    Rubi 03958 - DELTA Tile Leveling Kit – 201 Pieces
      Rubi - DELTA Tile Leveling Kit – 201 Pieces Model # 03958

     
    • The kit consists of 1 pliers, 100 strips and 100 reusable wedges.
    • Packaged in a handy bucket.
    Rubi 54911 - DV-200-1000 220V Electric Tile Cutter
      Rubi - DV-200-1000 220V Electric Tile Cutter Model # 54911

     
    • Motor assembly on sliding bearings for accurate and quality cuts
    • 45° Foldable head for mitre cuts up to 106cm length
    • Extruded aluminium table, for easy removal and cleaning
    Rubi 54964 - DV-200-1000 110V Electric Tile Cutter
      Rubi - DV-200-1000 110V Electric Tile Cutter Model # 54964

     
    • Motor assembly on sliding bearings for accurate and quality cuts
    • 45° Foldable head for mitre cuts up to 106cm length
    • Extruded aluminium table, for easy removal and cleaning
    Rubi 32934 - SPT-250-PREMIUM 10 In. Segmented Diamond Saw Blade (250mm)
      Rubi - SPT-250-PREMIUM 10 In. Segmented Diamond Saw Blade (250mm) Model # 32934

     
    • For cutting all types of ceramic, porcelain and natural stone materials
    • For cutting thicknesses from 20 mm to 35 mm.
    • laser welded joints
    Rubi 32935 - SPT-300-PREMIUM 12 In. Segmented Diamond Saw Blade (300mm)
      Rubi - SPT-300-PREMIUM 12 In. Segmented Diamond Saw Blade (300mm) Model # 32935

     
    • For cutting all types of ceramic, porcelain and natural stone materials
    • For cutting thicknesses from 20 mm to 35 mm.
    • laser welded joints
    Rubi 31969 - TPI-250-SUPERPRO 10 In. Continuous Diamond Saw Blade (250mm)
      Rubi - TPI-250-SUPERPRO 10 In. Continuous Diamond Saw Blade (250mm) Model # 31969

     
    • For the miter cut of porcelain tiles
    • High stability and speed of cut
    • Sintered blade
    • Laser welded
    Rubi 32974 - SHR-250-PRO 10 In. Segmented Diamond Saw Blade (250mm)
      Rubi - SHR-250-PRO 10 In. Segmented Diamond Saw Blade (250mm) Model # 32974

     
    • Recommended for cutting building materials such as brick, concrete, terrazzo
    • Maximum speed and best cooling
    • For cutting materials greater than 25mm thickness
    • For wet cutting
    Rubi 32972 - SHR-300-PRO 12 In. Segmented Diamond Saw Blade (300mm)
      Rubi - SHR-300-PRO 12 In. Segmented Diamond Saw Blade (300mm) Model # 32972

     
    • Recommended for cutting building materials such as brick, concrete, terrazzo
    • Maximum speed and best cooling
    • For cutting materials greater than 25mm thickness
    • For wet cutting
    Rubi 32971 - SHR-350-SUPERPRO 14 In. Segmented Diamond Saw Blade (350mm)
      Rubi - SHR-350-SUPERPRO 14 In. Segmented Diamond Saw Blade (350mm) Model # 32971

     
    • Recommended for cutting building materials such as brick, concrete, terrazzo
    • Maximum speed and best cooling
    • For cutting materials greater than 25mm thickness
    • For wet cutting
    Rubi 03957 - DELTA Tile Leveling Kit, 1.5mm – 201 Pieces
      Rubi - DELTA Tile Leveling Kit, 1.5mm – 201 Pieces Model # 03957

     
    • Prevents the movement of parts while setting adhesive
    • Improves the resulting surface flatness
    • Comes in a practical bucket type container with a handle for easy use and transport
    Rubi 04916 - DRYGRES – 2 1/2 In. Diamond Tile Drill Bit (65mm)
      Rubi - DRYGRES – 2 1/2 In. Diamond Tile Drill Bit (65mm) Model # 04916

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 06972 - DRYGRES PREMIUM – 1 1/8 In. Diamond Tile Drill Bit (28mm)
      Rubi - DRYGRES PREMIUM – 1 1/8 In. Diamond Tile Drill Bit (28mm) Model # 06972

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 06974 - DRYGRES PREMIUM – 1 3/4 In. Diamond Tile Drill Bit (43mm)
      Rubi - DRYGRES PREMIUM – 1 3/4 In. Diamond Tile Drill Bit (43mm) Model # 06974

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 06975 - DRYGRES PREMIUM – 2 In. Diamond Tile Drill Bit (50mm)
      Rubi - DRYGRES PREMIUM – 2 In. Diamond Tile Drill Bit (50mm) Model # 06975

     
    • Dry Cut Only. Diamond drilling set for wall and floor tiles.
    • For the Hole Cutting in Ceramic tiles and Porcelain tiles.
    • For use with an angle grinder.
    Rubi 18982 - SLAB TRANS N – Heavy Duty Tile Transportation System, 360x160cm
      Rubi - SLAB TRANS N – Heavy Duty Tile Transportation System, 360x160cm Model # 18982

     
    • Reinforced aluminium profile joined by a system of sliders provides great structural strength
    • Includes 2 perpendicular aluminium guides, for greater stiffness
    • Equipped with four retractable and removable Soft-Grip handles adaptable to every situation during installation
    Rubi 16900 - Slab Cutter G3 – Manual Tile Cutter, Porcelain Tiles, 320cm
      Rubi - Slab Cutter G3 – Manual Tile Cutter, Porcelain Tiles, 320cm Model # 16900

     
    • Carriage with lever mechanism for perfect scoring with extreme roller guide
    • Reinforced guides interconnected by an adjustable lever mechanism
    • Cutting capacity of 320 cm, extendable according to need with additional guides
    Rubi 17924 - TZ-1800 Manual Tile Cutter, Ceramic, Porcelain Tiles, 180cm
      Rubi - TZ-1800 Manual Tile Cutter, Ceramic, Porcelain Tiles, 180cm Model # 17924

     
    • Smooth and precise head movement
    • Large cutting capacity, ideal for large formats tiles
    • Robust and folding structure for added strength and ease in transport
    Rubi 02030 - 1/32 In. Tile Spacers For Joints (1mm) – 1000 Pieces
      Rubi - 1/32 In. Tile Spacers For Joints (1mm) – 1000 Pieces Model # 02030

     
    • Reinforced tile spacer, especially for large format tiles.
    • Quality base material, free of impurities and imperfections.
    • Bottom frame designed for good settlement in the material.
    Rubi 02031 - 1/16 In. Tile Spacers For Joints (1.5mm) – 1000 Pieces
      Rubi - 1/16 In. Tile Spacers For Joints (1.5mm) – 1000 Pieces Model # 02031

     
    • Reinforced tile spacer, especially for large format tiles.
    • Quality base material, free of impurities and imperfections.
    • Bottom frame designed for good settlement in the material.
    HUSQVARNA 522976101 - Vari-Drill D05 Diamond Tile Drill Bit Set
      HUSQVARNA - Vari-Drill D05 Diamond Tile Drill Bit Set Model # 522976101

     
    • Adapters available – Adapters are available as accessories to fit variious machine connectors.
    • Cleaner work environment – Dry applications for clean jobs, in e.g. renovation.
    Rubi 2840 - 1.5mm Delta Tile Leveling Strips – 200 Pieces
      Rubi - 1.5mm Delta Tile Leveling Strips – 200 Pieces Model # 2840

     
    • Designed to obtain a fast and level tile installation without the need for subsequent adjustments.
    • Reduces installation time
    • Caps can be reused up to 25 times.
    Rubi 51979 - TC-125 Tile Cutter Guides Kit
      Rubi - TC-125 Tile Cutter Guides Kit Model # 51979

     
    • Tile cutter guides for precise and clean cuts
    Bosch GDC 140 - 220V Professional Tile Cutter Marble Saw, 115mm
      Bosch - 220V Professional Tile Cutter Marble Saw, 115mm Model # GDC 140

     
    • Powerful and smooth on hard surfaces
    • Powerful for fast cutting thanks to motor of 1400W power
    • Precise cutting due to low vibration of tool and disc that allows easy control
    Rubi 16903 - RUBIMIX-8 EASY PRO 220V Mortar Mixer 1400W, 700 RPM – with 120mm Dia. Mixer Paddle
      Rubi - RUBIMIX-8 EASY PRO 220V Mortar Mixer 1400W, 700 RPM – with 120mm Dia. Mixer Paddle Model # 16903

     
    • Lightweight PRO quality electric mixer.
    • 1400 W electric motor
    • Mixing paddles connection through M14 thread.
    • Greater electrical SAFETY thanks to double isolation.
    Rubi 27902 - HIT-1200-Plus Manual Tile Cutter, for Stoneware, Ceramic and Porcelain Tiles, 120cm Cutting Length, with 22mm Scoring Wheel
      Rubi - HIT-1200-Plus Manual Tile Cutter, for Stoneware, Ceramic and Porcelain Tiles, 120cm Cutting Length, with 22mm Scoring Wheel Model # 27902

     
    • Robust and accurate manual tile cutter
    • With high performance movable breaker.
    • Set of sliders with ball bearings for greater ACCURACY and COMFORT during scoring.
    Rubi 35950 - Cyclone – Tile Leveling Cap, 300-Pieces
      Rubi - Cyclone – Tile Leveling Cap, 300-Pieces Model # 35950

     
    • Reusable
    • Special 6 mm external thread
    • Eccentric detail for better force concentration
    • Crowned area for better grip
    • Supplied in reusable container
    Rubi RUBI-35938 - Cyclone – 1mm Flat Base Tile Leveling Stand, 300-Pieces
      Rubi - Cyclone – 1mm Flat Base Tile Leveling Stand, 300-Pieces Model # RUBI-35938

     
    • Visual thickness identification by colour
    Rubi RUBI-35941 - Cyclone – 1.5mm Flat Base Tile Leveling Stand, 300-Pieces
      Rubi - Cyclone – 1.5mm Flat Base Tile Leveling Stand, 300-Pieces Model # RUBI-35941

     
    • Visual thickness identification by colour
    Rubi RUBI-35944 - Cyclone – 2mm Flat Base Tile Leveling Stand, 300-Pieces
      Rubi - Cyclone – 2mm Flat Base Tile Leveling Stand, 300-Pieces Model # RUBI-35944

     
    • Visual thickness identification by colour
    Rubi RUBI-35953 - Cyclone – 1.5mm Cross Base Tile Leveling Stand, 300-Pieces
      Rubi - Cyclone – 1.5mm Cross Base Tile Leveling Stand, 300-Pieces Model # RUBI-35953

     
    • Visual thickness identification by colour
    Rubi 26999 - Manual Tile Cutter, 100 cm Cutting, HIT-1000 N with Bag
      Rubi - Manual Tile Cutter, 100 cm Cutting, HIT-1000 N with Bag Model # 26999

     
    • Rubi HIT 1200 N hand tile cutter for fast, repetitive cutting of all commercially available ceramic tiles.
    • Magnetic system ensures one-handed use.
    • Chrome, solid, corrosion-resistant rails with a diameter of 20 mm.

    Provide us your contact details one of our product experts will contact you to discuss your needs or schedule a demonstration at a time that suits

    Product selected: Model #







      *Demonstrations can only be scheduled within the UAE