Digital Multimeters

• Voltage; resistance; continuity; capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Data hold

• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Backlit display

• True RMS .5% accuracy; 28% larger digits; 6000 counts
• AutoVolt; large white LED backlight; resistance and continuity; Min/Max/Average; CAT III 600V
• MIN/MAX/AVG recording

• True RMS; 600V AC/DC; Ohms; Continuity. Measures 20A; 30 seconds momentary; 10A continuous.
• Measure voltage; continuity; resistance; diode and capacitance
• Simple and effective tool for general electrical and electronic testing

• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Resistance; continuity; frequency and capacitance

• Electrician’s Multimeter with Non-Contact Voltage Detector (TRMS; 600VAC/DC; Ohms; Continuity)
• Ideal multimeter for all professional electricians
• Measures AC/DC voltage; current; resistance; continuity; frequency and capacitance

• True RMS voltage and current measurements. 0.09% basic accuracy.
• Auto and manual ranging digital true RMS digital multimeter
• Measures voltage; current; resistance; capacitance; frequency and temperature

• True RMS digital multimeter
• Measure AC/DC voltage and current; resistance; capacitance; frequency and temperature
• Manual/automatic ranging

• A full-featured, precision multimeter for troubleshooting electrical and electronic systems
• Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording

• A full-featured, precision multimeter for troubleshooting electrical and electronic systems
• Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
• Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording

• True RMS Digital Multimeter with detachable display
• Measures up to 1000 VAC and DC
• Measures up to 10 A (20 A for 30 seconds)

• Full-featured multimeter with built-in thermal image
• 15 measurement functions including: AC voltage with low-pass filter; DC voltage; Resistance; Continuity; Capacitance; Diode test;

• Low-pass filter for troubleshooting adjustable speed drives

• iFlex expands your measurement capabilities get into tight.
• Designed for durability, built to withstand a 3 m (9.8Ft) drop, double insulated with raised rubber holster for increased protection
• Save measurements and images while communicating wireless with a smart phone up to 20 feet/6.1 m away (no obstructions)

• True-rms Electronics Logging Multimeter with TrendCapture quickly documents design performance and graphically displays what happened.
• 50;000 count DMM features a large LCD display; 200 hours of data recording; graphical trend display.
• Dual rated CAT IV 600V; CAT III 1000V

• True RMS Electronics Logging Multimeter with TrendCapture – 50;000 count DMM
• large LCD display; 200 hours of data recording; graphical trend display.
• Low pass filter for accuracy in ‘noisy’ environments

• TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred
• Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
• Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy

• IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3 meter drop (with holster)
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

• Min/Max/Average; Analog Bargraph; Digital Display; 1000V AC/DC; 10A AC/DC.
• A battery-powered; average responding-rms indicating multimeter; with a 6000-count; 3 3/4-digit display; and a bar graph.
• Free your hands with the optional TPAK magnetic hanger

• Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
• Offers true-RMS AC voltage and current for measuring non-linear signals
• Safety rated CAT III 1000 V, CAT IV 600 V

• Designed to IEC 1010 standard
• Adapter allows access to hard-to-reach test points
• Tips are insulated to the point to prevent shorting of adjacent components

• 6.5 digit resolution
• Basic V DC accuracy of up to 0.0024%
• Dual display

• 6.5 digit resolution
• Basic V DC accuracy of up to 0.0024%
• Dual display

• 6.5 digit resolution
• Basic V DC accuracy of up to 0.0024%
• Dual display

This product has been discontinued by the manufacturer.

• 6.5 digit resolution
• Basic V DC accuracy of up to 0.0024%
• 100 µA to 10 A current range; with up to 100 pA resolution

• Broad range of functions; measuring volts; ohms and amps with a basic V DC accuracy of 0.015%
• Measure small currents with a resolution of up to 100 nA.
• Dedicated dc leakage current measurement

• Broad range of functions; measuring volts; ohms and amps with a basic V DC accuracy of 0.015%
• Measure small currents with a resolution of up to 100 nA.
• Six dedicated instrument setup keys to instantly select saved test configurations. Ideal for making routine measurements.

• Broad range of functions; measuring volts; ohms and amps with a basic V DC accuracy of 0.015%
• Measure small currents with a resolution of up to 100 nA.
• Basic V DC accuracy of 0.015%

• Tough molded plastic case with die-cut foam to hold and protect the 8845A or 8846A meter
•  Accessories and manual compartments
•  One-year warranty

• Pin tip jack at the adapter end is recessed for added insulation protection
• Adapter allows easy access to leads of through-hole IC’s
• Insulation at the tip fits between leads to prevent accidental shorting

• Plugs into USB device host port on the 8846A front panel
• Fully compliant with Universal Serial Bus Specification v2.0
• Dual LED indicates power and busy status

• Resistance Nominal 100 Ω
• Temperature coefficient 0.00385 Ω/Ω °C nominal
• Drift rate + 0.13 °C at 0 °C after 1000 hours at 300 °C

• 4-terminal shorting bar
• 4 mm banana terminals sized and oriented to short DMM input source and sense terminals
• Used to null out front end offsets or as required by the calibration procedure

• USB-to-serial-RS-232 interface adapter cable
•  Converts from standard DB 9-pin serial to USB 2.0
• Requires an available PC communications port

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Voltage, resistance, continuity, capacitance

• Multiple functions with Auto / Manual ranges
• Measurements : Frequency; Temperature; AC/DC A-V-Ohm ; capacitance; Diode & Continuity ; duty cycle
• Frequency : 50Hz to 100Khz

• Fluke 287 and 289 (Model FVF-SC2)
• Fluke 180 Series Digital Multimeters (Model FVF-SC2)
• Fluke 1653 Installation Testers (Model FVF-SC2)

• Fluke FVF-SC5 Flukeview Forms Basic Software
• For 8845/8846 Series Meters

FlukeView Forms supports the following meters:

• Fluke 287 and 289 (Model FVF-SC2)
• Fluke 180 Series Digital Multimeters (Model FVF-SC2)
• Fluke 1653 Installation Testers (Model FVF-SC2)

• Fluke Y8021 Shielded IEEE 488 Cable, 1M

• Cable length: 2m
• For use with Models for 8845A and 8846A

• 2 Small filler plate
• 1 Dual center mount
• 1 Rack mount tray

• 1 small filler plate
• 2 large filler plates
• 1 rack mount tray

• AC and DC voltage measurements to 1000V
• AC and DC current with 0.01 mA resolution
• Continuity, resistance, diode test, capacitance and frequency measurements

• Compact design
• Tests AC/DC voltage and current, resistance, capacitance, frequency and temperature
• Built-in stand for hands-free use

• Measure AC/DC voltage, AC/DC current, resistance and continuity/diode
• Built-in voltage detector
• Ideal for basic electrical applications

• High basic accuracy of 0.3%
• Both an IR thermometer and Type K probe
• Performs 12 different functions

• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Complete with double molded test leads, magnetic hanging strap, carrying case and 9V battery
• Dual sensitivity frequency functions (electrical/electronic)

• Type K temperature probe included
• High 0.09% basic accuracy
• 6,000 count LCD display with backlit and bargraph

• Auto/Manual ranging pen-style multimeter
• Built-in Non-Contact Voltage (NCV) detection with visible and audible alarm
• Large 2000 count high contrast LCD display

• Auto power off
• Auto range
• 4000 display count

• Functions: AC/DC current and AC voltage resistance temperature (ºC and ºF) continuity test (with buzzer, diode test)
• Data Hold function
• Low battery indication

• Measures AC/DC current and voltage
• Resistance; capacitance; frequency; temperature
• Tests diodes; continuity and transistors

• Measures AC/DC current and voltage
• Resistance; capacitance; frequency; temperature
• Tests diodes; continuity and transistors

• MAX/MIN/REL modes
• Data hold, LED backlight, auto power off
• Full range protection (600V)

• 60000-count True RMS auto range multimeter
• The programmable square wave output checks audio signals and OLED display with LCD backlight is available
• OLED display

• Trend capture
• Data logging: 20000
• Data comparison

This product has been discontinued by the manufacturer.
Alternate products: UT61D+.

• Back-lit LCD Screen with 40-segment analog bar graph
• Relative value measurement
• Max & Min value

• 22;000 display count; can measure weak signals
• Analogue bar graph
• True RMS measurement

• Adjustable data recording interval
• True RMS, duty cycle, continuity buzzer
• MAX/MIN/REL modes; peak/data hold; analog bar graph

• Handheld digital oscilloscope multimeters
• Has embedded digital control technology design
• Set digital storage oscilloscope and digital multimeter in one

• IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
• Large 6000-count LCD screen
• True RMS

• IP65 Water Proof / GS Certified 3rd edition CE
• 2m drop proof
• CAT III 1000V/IV 600V

• IP65 Water Proof / GS Certified 3rd edition CE
• 2m drop proof
• CAT III 1000V/IV 600V

• Measure two-way AC voltage; current; phase angles between voltages
• Current or both; frequency; phase sequency
• Active; reactive and apparent powers

• Measures voltage, current, power, frequency, relationships between U-U, U-I, I-I all at the same time
• Auto range, 2/s sampling rate
• Data hold

• 2000 count LCD display, overload indication, backlight
• AC voltage measurement, auto power off
• Auto discharge

• Best entry level DMM with wide capability VDC, VAC, Ohms, Continuity, Diode, Temp, Current DC
• Big LCD display with bright white backlight for clear view of measurement
• CAT II 600V safety rating

• Safe, Accurate, Multi-function and Value for Money.
• Rugged DMM pass the 2meters drop test
• NCV voltage detectors for safety verification

• Safe, Accurate, Multi-function and Value for Money.
• Rugged DMM pass the 2meters drop test
• NCV voltage detectors for safety verification

• Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster
• Waterproof, dustproof IP67 case for the most extreme work sites
• Premium TL175 TwistGuard™ test leads

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning

• True-rms ac voltage for accurate measurements on non-linear signals
• Resistance and continuity
• Large white LED backlight to work in poorly lit areas

• Clear LCD display
• Comfortable protective cover, with test lead hanging groove
• 2 meters drop test, precision protection

• Clear LCD display
• Comfortable protective cover, with test lead hanging groove
• 2 meters drop test, precision protection

UT39+ series modern digital multimeters are portable devices designed for the electrical industry. They feature overvoltage and overcurrent alarm and high voltage protection, triggered during faulty operation. UT39C+ is suitable for HVACR maintenance with its temperature measurement feature. Designed according to CAT II 1000V/CAT III 600V safety standards.

UT171 series are industrial grade multimeters used by professionals. Its built-in square wave output is useful for troubleshooting industrial control signals. Its LoZ (ACV) feature can be used to identify residual (ghost) voltage in large capacitors. UT171C’s OLED display is perfect for working in low temperatures down to -30°C.

• The Extech EX470A True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance.
• Also includes Type K thermometer for contact or air temperature measurements from -4 to 1832 °F (-20 to 750 °C).

• A digital multi-meter for a stationary workplace that can measure current, voltage and resistance, the digital multi-meter can also use two thermocouples to measure the temperature and also determine the conductivity.
• It can perform a variety of different measurement tasks. A direct connection to a PC can be established via the USB interface on the back of the digital multi-meter. The software from the digital multi-meter can then be used to carry out live analyzes using graphics and tables.
• Another special feature of the digital multi-meter is the PASS / FAIL function. With this function, target ranges for the measured values ​​can be set for each measuring function.

• The rotating field indicator PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks is able to measure voltages up to 600V AC / DC.
• The rotating field direction is important for machines and plants. If the phases are not connected correctly, damage to connected motors and pumps can occur, for example.
• The rotating field indicator shows the direction of rotation on an LCD display and see whether a phase has been connected to the measuring lines or not.
• The measuring cables of the rotating field indicator are equipped with crocodile clips so that the measuring device can be connected directly to cables or screw contacts.

• The handheld digital multimeter is a versatile and universally applicable instrument, combined with an oscilloscope and a True RMS multimeter.
• The bandwidth of the handheld oscilloscope multimeter can be up to 20 MHz. The digital multimeter was developed for practical and mobile use and is suitable for fault detection thanks to the versatile equipment.
• The brightness of the LC display of the digital multimeter with a resolution of 128 x 128 pixels can be set in 2 levels and thus individually tailored to the user or location. Furthermore, the digital multimeter has an internal memory in which both up to 50 wave forms as well as measured values can be stored.

• This voltmeter has both automatic and manual range selection and a dual OLED display. The measured values ​​are displayed on the OLED number display up to 6000 digits and in the bar graph.
• The readings can be read easily and changes can be displayed quickly. The voltmeter has full input protection and complies with protection class CATIII 1000V.
• Simple and direct selection of the basic functions by means of pushbuttons and autom. Range selection for: DCV, ACV, DCA, ACA, ohms, diode, continuity, capacitance, frequency and temperature measurement functions. The voltmeter measures voltages up to 1000V AC / DC.

• This voltmeter has both automatic and manual range selection and a dual OLED display. The measured values ​​are displayed on the OLED number display up to 6000 digits and in the bar graph.
• The readings can be read easily and changes can be displayed quickly. The voltmeter has full input protection and complies with protection class CATIII 1000V.
• Simple and direct selection of the basic functions by means of pushbuttons and automatic. Range selection for: DCV, ACV, DCA, ACA, ohms, diode, continuity, capacitance, frequency and temperature measurement functions. The voltmeter measures voltages up to 1000V AC / DC.

• The voltage tester is a versatile measuring instrument. In addition to the standard voltage and current measurements, the voltage tester also has a network analysis.
• With this network analysis, the voltage tester can be used to check, for example, LAN connections for their correct wiring and function. Telephone connections can also be checked for their function with this voltage tester. If cables can not be found again, the voltage tester also helps here.
• Thanks to the cable finder function of the voltage tester, the operator can find the required cable in no time at all. To do this, the voltage tester must be connected to the connection of a cable. The voltage tester now acts as a transmitter.

• Equipped with audible and visible alarm, this series can provide warning especially when measuring high voltage/current and temperature.
• A reliable true RMS digital multimeter with 6000 display counts.
• It can measure up to 1000V AC/DC

• VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity*
• True RMS for accurate AC