Manual Pipe Threaders

• Designed to thread pipe or conduit using individual die heads and a manually operated ratchet
• Manual pipe threading set includes BSPT dies heads, ratchet assembly, ratchet handle, and alloy dies
• Quick starting dies make threading pipe faster and easier

• Manually operated ratchet designed to thread pipe or conduit using 12-R die heads (sold separately)
• Ratchet knob indicates forward and reverse
• Die heads snap in from both sides and easily lock in place

• 1-R Capacity: 1/8 to 2″
• Quick starting dies for threading pipe faster and easier
• Ratcheting action to minimize operator fatigue

• Designed to thread pipe or conduit using individual die heads and a manually operated ratchet
• Manual pipe threading set includes NPT dies heads, ratchet assembly, ratchet handle, and alloy dies
• Superior grade 65-45-12 ductile iron castings provide maximum strength and durability

•  These are the same dies that fit many powered threaders.
•  Exposed ratchet threader set.

• Designed to thread pipe or conduit using individual die heads and a manually operated ratchet
• Manual pipe threading set includes NPT dies heads, ratchet assembly, ratchet handle, and alloy dies
• Superior grade 65-45-12 ductile iron castings provide maximum strength and durability

• Jaw clutch prevents jamming.
• Simple adjustment for tapered or straight threads.
• Cam-type work holder sets instantly.

• Jaw clutch prevents jamming.Simple adjustment for tapered or straight threads.
• Cam-type workholder sets instantly.
• Fully enclosed gearing.

• For use with hand-held power drive model 700
• Suitable for use with 12-R (30118) ratchet and handle assembly
• Nominal Pipe Size: 1/2 in.

• For use with hand-held power drive model 700
• Suitable for use with 12-R (30118) ratchet and handle assembly
• Nominal Pipe Size: 3/4 in.

• For use with hand-held power drive model 700
• Suitable for use with 12-R (30118) ratchet and handle assembly
• Nominal Pipe Size: 1 in.

• For use with hand-held power drive model 700
• Suitable for use with 12-R (30118) ratchet and handle assembly
• Nominal Pipe Size: 1 1/4 in.

• For use with hand-held power drive model 700
• Suitable for use with 12-R (30118) ratchet and handle assembly
• Nominal Pipe Size: 1 1/2 in.

• For use with hand-held power drive model 700
• Suitable for use with 12-R (30118) ratchet and handle assembly
• Nominal Pipe Size: 2 in.

• Manually operated ratchet designed to thread pipe or conduit using 11-R die heads (sold separately)
• Ratchet knob indicates forward and reverse
• Die heads snap in from both sides and easily lock in place

• Precision alloy construction
• Right-hand thread direction
• 1/2 to 14 NPT

•  Alloy material
•  Nominal Pipe size 3/4″
•  Pipe dies for OO-R, 111-R, 12-R, O-R, 11-R

• High-strength alloy construction
• Right-hand thread direction
• For NPT connections

• Individual dies for 1.25″ (3.18 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 1.5″ (3.81 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 2″ (5.08 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 0.5″ (1.27 cm) size pipe or conduit
• Produces 14 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 0.75″ (1.91 cm) size pipe or conduit
• Produces 14 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 1″ (2.54 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders (sold separately)

• Individual dies for 2″ (5.08 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

•  NPT Dies are for tapered “Plumber’s” threads.
•  NPSM Dies are for straight “Electrician’s” threads.

• Individual dies for 0.5″ (1.27 cm) size pipe or conduit
• Produces 14 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 0.75″ (1.91 cm) size pipe or conduit
• Produces 14 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 1″ (2.54 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 1.25″ (3.18 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 1.5″ (3.81 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• Individual dies for 2″ (5.08 cm) size pipe or conduit
• Produces 11.5 high-quality threads per inch
• For use with manually-operated threaders

• For use with model 141 and 161 Geared Threaders
• Enables threading to be performed by hand
• Designed for stationary pipe set-up

• Made of the highest quality steel
• Supplied standard as right hand thread

• Designed for use with 0.75″ (1.91 cm) conduits
• Use to create 14 TPI on your tubing
• Easily install dies into your RIDGID 12-R die head (sold separately) to get started

• Designed for use with 1″ (2.54 cm) conduits
• Use to create 11 TPI on your tubing
• Easily install dies into your RIDGID 12-R die head (sold separately) to get started

• Cuts and renews external and internal threads to for standard pipe sizes
• Heat treated and hardened
• Alloy Steel construction

• Pipe thread die 4 piece set
• Cuts and renews external and internal threads to for standard pipe sizes
• Heat treated and hardened

• Cuts and renews external and internal threads to for standard pipe sizes
• Heat treated and hardened
• Alloy Steel construction

• Telescoping (41 to 50 in.) drive shaft
• For use with Model 141 and 161 Geared Threaders
• Required for configuring geared threader with Model 535 or 1224 Threading Machine, 300 Power Drive

• Designed to thread pipe or conduit using individual die heads and a manually operated ratchet
• Manual pipe threading set includes BSPT dies heads, ratchet assembly, ratchet handle, and alloy dies
• Superior grade 65-45-12 ductile iron castings provide maximum strength and durability

• Designed to thread pipe or conduit using individual die heads and a manually operated ratchet
• Manual pipe threading set includes BSPT dies heads, ratchet assembly, ratchet handle, and alloy dies
• Superior grade 65-45-12 ductile iron castings provide maximum strength and durability

• Threads 2 1/2″, 3″, 3 1/2″ and 4″ pipes
• Built with jaw clutch to prevent jamming
• Simple adjustment to make either tapered or straight threads

• Slim, compact design with excellent overall size, ratchet angle of 22.5°
• Easy operation in hard-to-reach places with the offset lever
• Simple insertion and removal of die heads
• Secure hold with retainer locking

• Slim, compact design with excellent overall size, ratchet angle of 22.5°
• Easy operation in hard-to-reach places with the offset lever
• Simple insertion and removal of die heads
• Secure hold with retainer locking

• Slim, compact design with excellent overall size, ratchet angle of 22.5°
• Easy operation in hard-to-reach places with the offset lever
• Simple insertion and removal of die heads
• Secure hold with retainer locking

• Slim, compact design with excellent overall size, ratchet angle of 22.5°
• Easy operation in hard-to-reach places with the offset lever
• Convenient, lockable reversal of the ratchet direction
• Simple insertion and removal of die heads